Scribd
Upload
38 views

Geological Mapping " Topographic Map ": Presented By: Team of Mining Geology

This document provides information about topographic maps, including: 1) It defines what a topographic map is and its purpose of showing the shape and features of the earth's surface at a reduced scale. 2) It outlines the characteristics and rules of contour lines on topographic maps, such as showing constant elevations and indicating slope with their spacing. 3) It discusses other elements of topographic maps like scale, how to create profiles, and different coordinate systems including latitude, longitude, and UTM used to specify locations.

Uploaded by

-'Mbenoer Lali Omah'-
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
38 views

Geological Mapping " Topographic Map ": Presented By: Team of Mining Geology

This document provides information about topographic maps, including: 1) It defines what a topographic map is and its purpose of showing the shape and features of the earth's surface at a reduced scale. 2) It outlines the characteristics and rules of contour lines on topographic maps, such as showing constant elevations and indicating slope with their spacing. 3) It discusses other elements of topographic maps like scale, how to create profiles, and different coordinate systems including latitude, longitude, and UTM used to specify locations.

Uploaded by

-'Mbenoer Lali Omah'-
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 17

GEOLOGICAL MAPPING

“ Topographic Map “

Presented by :
Team of mining geology

ASSALAMU’ALAIKUM WR WB
What’is a Map??

Topographic maps are two dimensional


representations of the earth's surface, showing
the shape, size, and relative position of natural
and man made features at a greatly reduced
scale.
The Characteristics of contour lines
The rules are as follows:

1) Every point on a


contour line represents
the exact same
elevation
2) Contour lines can never cross one another.
Each line represents a separate elevation, and you
can’t have two different elevations at the same
point.
The only exception to this rule is if you have an
overhanging cliff
3) Moving from one contour line to another always
indicates a change in elevation.

 To determine if it is a positive (uphill) or negative


(downhill) change you must look at the index contours
on either side (see figure).
4) On a hill with a consistent slope, there are always four intermediate contours
for every index contour.

If there are more than four index contours it means that there has been a change
of slope and one or more contour line has been duplicated. This is most common
when going over the top of a hill or across a valley (see figure).

 5) The closer contour lines are to one another, the steeper the slope is in
the real world. If the contour lines are evenly spaced it is a constant slope, if
they are not evenly spaced the slope changes.

 6) A series of closed contours (the contours make a circle) represents a hill. If


the closed contours are hatchured it indicates a closed depression (see figure).

 7) Contour lines crossing a stream valley will form a "V" shape pointing in the
uphill (and upstream) direction.
Map SCALE
 Map scale represents the relationship between distance on the map and the
corresponding distance on the ground. The scale on the topo map is found at the
bottom center of the map.

 Scale is represented in two different ways on a topographical map. The first is a


ratio scale. The ratio scale on this map is 1:24,000. What it means is that one inch
on the map represents 24,00 inches on the ground. Below the ratio scale is a
graphic scale representing distance in miles, feet and meters. The graphic scale
can be used to make fast estimates of distances on the map. The space between
the 0 and the 1 mile mark on the scale is the distance you must go on the map to
travel one mile.
Creating Topographic Profiles
Creating Topographic Profiles
Vertical exageration
Geographic coordinate system

A geographic coordinate system is a


coordinate system that enables every location on the Earth
to be specified by a set of numbers. The coordinates are
often chosen such that one of the numbers represent
vertical position, and two or three of the numbers
represent horizontal position. A common choice of
coordinates is latitude, longitude and ellipsoid height
Latitude phi (φ) and Longitude lambda (λ)
UTM- Universal Transverence Mercator
Geographic Coordinate System

The Universal Transverse Mercator (UTM) coordinate


systems both use a metric-based cartesian grid laid out
on a conformally projected surface to locate positions
on the surface of the Earth. The UTM system is not a
single map projection but a series of map projections,
one for each of sixty zones
UTM zone
THANK’S 4
YOUR
ATTENTION

You might also like