Scribd
Upload
12 views8 pages

Voice Over Internet Protocol

VoIP stands for Voice over Internet Protocol. It allows users to make voice calls using a broadband Internet connection instead of a regular phone line. VoIP converts voice into digital data packets that travel over the Internet or IP networks. Common technologies used to implement VoIP include SIP, RTP, and H.323. Mass-market VoIP services using existing broadband access became popular in 2004. A VoIP phone or software on a computer/mobile device can connect to a VoIP service provider to place calls over IP networks instead of the public switched telephone network.

Uploaded by

guptamohit07
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
12 views8 pages

Voice Over Internet Protocol

VoIP stands for Voice over Internet Protocol. It allows users to make voice calls using a broadband Internet connection instead of a regular phone line. VoIP converts voice into digital data packets that travel over the Internet or IP networks. Common technologies used to implement VoIP include SIP, RTP, and H.323. Mass-market VoIP services using existing broadband access became popular in 2004. A VoIP phone or software on a computer/mobile device can connect to a VoIP service provider to place calls over IP networks instead of the public switched telephone network.

Uploaded by

guptamohit07
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 8

Voip

Voice over internet protocol


• Voice over Internet Protocol (VoIP, Voice over IP) is a
general term for a family of methodologies,
communication protocols, and transmission technologies
for delivery of voice communications and multimedia
sessions over Internet Protocol (IP) networks, such as
the Internet. Other terms frequently encountered and
synonymous with VoIP are IP telephony, Internet
telephony, voice over broadband (VoBB), broadband
telephony, and broadband phone.
• Internet telephony refers to communications services —
voice, facsimile, and/or voice-messaging applications —
that are transported via the Internet, rather than the
public switched telephone network (PSTN). The basic
steps involved in originating an Internet telephone call are
conversion of the analog voice signal to digital format and
compression/translation of the signal into
Internet protocol (IP) packets for transmission over the
Internet; the process is reversed at the receiving end.[1
• Voice over IP has been implemented in
various ways using both proprietary and
open protocols and standards. Examples
of technologies used to implement Voice
over IP include:
• H.323
• IP Multimedia Subsystem (IMS)
• Media Gateway Control Protocol (MGCP)
• Session Initiation Protocol (SIP)
• Real-time Transport Protocol (RTP)
• Session Description Protocol (SDP)
• A major development that started in 2004[2]
was the introduction of mass-market VoIP
services that utilize existing broadband
Internet access

• A VoIP phone is necessary to connect to a


VoIP service provider. This can be
implemented in several ways
PSTN and mobile network
providers

First, You have to make sure service is running. To do it just go to Services


/Configuration leaf in left VSM tree. In the upper part of window You can see label
„Voip Switch Service status". Status should be " RUNNING" (as shown below).

                                                      
If shown status is „ STOPPED ",You should press START button to start service.
Status should change to " RUNNING".
• This situation occurs when "Limit ring time" option is not set. To set "Limit ring time" to some value go
to Settings / VoipSwitch leaf in left menu of VSM.

• Then check "Limit ring time" box and enter desired value (in seconds). Next confirm changes by
pressing "Save changes" button.
• In VSM open Settings -->
Invoices
Click button "Edit
Templates", then will
appear menu with
options, from this menu
select "Detailed billing" or
"Summary billing".

It will open window


"Report Designer", click
on position "Detail"

You might also like