Scribd
Upload
98 views

Intro Pre-Lab1 V4

This document provides instructions for using ANSYS Workbench to simulate laminar pipe flow via computational fluid dynamics (CFD) and compares the CFD results to analytical fluid dynamics (AFD) by analyzing the axial velocity profile, centerline velocity, pressure, and wall shear stress. The procedure involves using ANSYS Design Modeler to generate the pipe geometry, ANSYS Fluent to define the physics and solve the simulation, and analyzing the results to compare the friction factor and velocity profile between laminar and turbulent flow.

Uploaded by

Anonymous RJfsy8Pt
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
98 views

Intro Pre-Lab1 V4

This document provides instructions for using ANSYS Workbench to simulate laminar pipe flow via computational fluid dynamics (CFD) and compares the CFD results to analytical fluid dynamics (AFD) by analyzing the axial velocity profile, centerline velocity, pressure, and wall shear stress. The procedure involves using ANSYS Design Modeler to generate the pipe geometry, ANSYS Fluent to define the physics and solve the simulation, and analyzing the results to compare the friction factor and velocity profile between laminar and turbulent flow.

Uploaded by

Anonymous RJfsy8Pt
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 14

 Overview of Pipe Flow

 CFD Process
 ANSYS Workbench
 ANSYS Design Modeler (Geometry)
 ANSYS Mesh
 ANSYS Fluent
o Physics (Setup)
o Solution
o Results
 Simulation of laminar pipe flow will be
conducted for this lab
 Axial velocity profile, centerline
velocity, centerline pressure, and wall
shear stress will be analyzed
 Computational fluid dynamics (CFD)
results for friction factor and velocity
profile will be compared to analytical
fluid dynamics (AFD)
 This lab will cover concept of laminar
vs. turbulent flow and developing
length for pipe flows

Flow visualization between two parallel plates


(starts at 14:25)
 Flow in pipe with Reynolds(Re) number
𝑈𝐷 𝐼𝑛𝑒𝑟𝑡𝑖𝑎𝑙 𝐹𝑜𝑟𝑐𝑒𝑠
◦ 𝑅𝑒 = =
𝜈 𝑉𝑖𝑠𝑐𝑜𝑢𝑠 𝐹𝑜𝑟𝑐𝑒𝑠
where U inflow velocity, D diameter of pipe, 𝜈 kinetic viscosity
◦ Laminar : Re < 2300
◦ Turbulent : Re > 2300
 Differences between laminar and turbulent flow
◦ (mean) Velocity profile
◦ Pressure drop
◦ Developing length
◦ Wall shear stress and friction factor

Note: Refer to Chapter 8 of your book for more details

Flow visualization of transition from laminar to turbulent flow


 The overall procedure for simulation of pipe flow is shown on chart
below
 Although we will be making the mesh before we define the physics
you have to know the physics to design appropriate mesh.

Geometry Physics Mesh Solution Results

Pipe (ANSYS General (ANSYS Structure Solution Plots (ANSYS


Design Modeler) Fluent - Setup) (ANSYS Mesh) Methods Fluent- Results)
(ANSYS Fluent
Model (ANSYS Uniform - Solution)
Fluent - Setup) (ANSYS Mesh) Graphics and
Animations
Laminar Boundary Monitors (ANSYS Fluent-
Conditions (ANSYS Fluent Results)
(ANSYS Fluent - Solution)
-Setup)

Reference
Values (ANSYS
Fluent - Setup)

Solution
Initialization
(ANSYS Fluent
-Solution)
 Design your simulation using ANSYS Workbench

ANSYS Mesh
ANSYS Design Modeler ANSYS Fluent
(Mesh)
(Geometry) (Physics, Solution and Results)
 Symmetric property of R
the flow is used to create
D
2D representation of the
3D pipe flow

Parameter Value
Wall
Radius of pipe, R 0.02619 m

Diameter of pipe, D 0.05238 m Flow


Inlet Outlet
Length of pipe, L 7.62 m
Center
 Create uniform grid distribution
 Using ANSYS fluent define physics of the flow, solve CFD simulation and
analyze results

Physics (Setup) Solution Results


r
Wall – No slip BC

Inlet – Velocity inlet BC Flow


Outlet – Pressure outlet BC
x

Center – Axisymmetric BC Zero slop at center or


𝑑𝑢
=0
 Laminar flow 𝑑𝑟
 Air properties
 Boundary Conditions (BC)
𝑑𝑝
◦ No-slip: velocities are zero (𝑢, 𝑣 = 0), pressure gradient ( 𝑑𝑟 = 0) is zero
◦ Symmetric: radial velocity is zero (𝑣 = 0), gradients of axial velocity and
𝑑𝑢 𝑑𝑝
pressure are zero ( 𝑑𝑟 = 0, = 0)
𝑑𝑟
𝑚 𝑑𝑝
◦ Inlet velocity: uniform constant velocity (𝑢 = 0.2 𝑠
,𝑣 = 0, 𝑑𝑟 = 0)
𝑑𝑢 𝑑𝑣
◦ Outlet: (gauge) pressure is imposed to the boundary (𝑝 = 0, 𝑑𝑥 = 0, = 0)
𝑑𝑥
 A limiting behavior in the solution of the equations
 Represented by the history of residuals or errors made by previous
iterative solutions.
 A converged solution is not necessarily an accurate one due to
iteration number, domain size, mesh resolution and numerical
schemes
 Continuity, momentum equation have their own residual histories.
 Developed length is distance from entrance to a point
where flow is fully developed.
 Fully developed flow does not change velocity profile
or velocity gradient in axial direction is zero.
 Pressure drops linearly.
 Axial velocity or skin friction distribution along axis
can be used to determine the length.

Developed region

Developing
region
 Flow can be visualized in detail using CFD
 Bring your Data Reduction Sheet for the CFD
Labs
 Deadline for CFD Lab report is two weeks
after your CFD lab (not pre-lab)
 Use lab drop-box when turning in your lab
reports
 Come to the office hours for help

You might also like