Scribd
Upload
262 views

Project Services Presentation - Roofing Installation and Estimates

The document discusses roofing parts and accessories, including panels, bent accessories, hardware accessories, and other items. It provides details on measurements like feed width, nominal width, and effective width. It also covers different roof types and shapes. The second half discusses tools and procedures for installing roofing. It provides an example estimation for roofing materials and accessories needed for a given roof area and configuration.

Uploaded by

LOUIE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
262 views

Project Services Presentation - Roofing Installation and Estimates

The document discusses roofing parts and accessories, including panels, bent accessories, hardware accessories, and other items. It provides details on measurements like feed width, nominal width, and effective width. It also covers different roof types and shapes. The second half discusses tools and procedures for installing roofing. It provides an example estimation for roofing materials and accessories needed for a given roof area and configuration.

Uploaded by

LOUIE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 54

PPGI & GI Products, Estimations, Installations

ROOFING PARTS & ACCESSORIES:


 Roof
 is the main component of a structure that protects it from weather.

 Panels
 is the main component of a roof that covers the structure.

 Bended Accessories
 are the bended materials that connects the joints of a roofing, they are
also made of PPGI materials.

 Hardware Accessories (connectors)


 are the accessories used to fasten or connect the panels and the bended
materials such as Tekscrew, Rivets, Wafer Tex, etc.

 Other Accessories
 Insulation, Wire Mesh, Duct Tape, Touch Up Paint, Silicon Sealant, GI
Wires, Concrete Nail, etc.
 Feed Width (FW)
 is the plain width of materials prior to roll forming.

 Nominal Width (NW)


 is the end to end width of a rollformed product.

 Effective Width (EW)


 is the effective coverage of the rollformed product.

 Thickness
 is the specified thickness tagged on our product.

 Length
 span of products express in meter, centimeter, feet,
inches.
•Gutter (alulod)

Box Type Spanish Type


Outside Gutter
•Valley Gutter

•Ridge roll (Palupo)


•Flashing
End Flashing

Wall Flashing

Apron Flashing

Capping Flashing
RIDGE CAP FLASHING SPANISH END FLASHING
VALLEY GUTTER

APRON FLASHING
SPANISH GUTTER

Created by: PSG - Luzon 2


•Tekscrews (turnilyo)

•Blind rivets

•Sealant (silicon)/ Vulcaseal

•Touch-up Paint

•Concrete Nail (pako)


‘Dos Aguas’ ‘Kwatro Aguas’
‘Dos Aguas’
‘Kwatro Aguas’

Created by: PSG - Luzon 2


Length (haba)
Width (lapad)
Gutter Line
Ridge Line
Actual
Measurement
Tools (Kagamitan)
•Tape Measure
(metro)
Actual
Measurement
Procedure (Pamamaraan)
INSTALLATION

Tools (Kagamitan)
•Riveter
•Drill (barena)
•Hammer
(martilyo)

Rubber
Mallet
•Roof Scissors
(gunting)
INSTALLATION

Procedure (Pamamaraan)
Tip: Unahin ang ikabit
ang nakalagay sa
pinakailalim.

Ex. Alulod – Yero - Palupo


Procedure:

Mataposng
Magsagawa ikabit
‘ ang lahat ng ‘ masiguro
’ upang ’ at ‘ na walang ‘ ’, ’
at•Huli,•Sunod
isarado •Sunod
•Ikabit
•Lagyan
na
angilatag
ang bubong
na
ngkalat
angpagkabit
ang mga ang
‘mga
ng saikabit
mga
ng’paglalagay
ang
‘ ’ (mga
‘ ’ atgilid
‘ pinag-gawaan
‘Bubong’ ang ng
ikasa
‘ngng
(Retaso, ’‘ ’(
‘Bubong’.
Ribaba). ). ’ )
Estimation:
Actual Measurement
(Aktwal na Sukat)

Based on Plan (Plano)


Actual Measurement
Yero:
Other(Aktwal
Piraso = = 10 na
Side pcs Sukat)
Total = 20=pcs of
Duratile = 9.95
Effective Width 1.005
Say 10 pcs
Halimbawa:
Actual Measurement
3.00 m
(Aktwal naRidge
Sukat)
Line
10.00
Bended Accessories:
Ridge Roll:
Piraso = RR pcs = = 4.35 ≈ 4.50
Effective Length 2.3
Say 5 pcs

Ridge Line
10.00
Bended Accessories:
Gutter:
OG pcs= = 10.0 = 4.50
Piraso OG pcs = = 4.35 ≈ 4.50
2.3 Length
Effective 2.3
Total = 9 pcs
10.00
Gutter Line

Created by: PSG - Luzon 2


Bended Accessories:
End Flashing:
Piraso = EF pcs = = 1.30 ≈ 1.50
Effective Length 2.3 x 4 sides
Total = 6 pcs

3.00 Flashing Line

Created by: PSG - Luzon 2


Summary:
Duratile: 20 pcs x 3.0m = 60LM

Bended Accessories
Ridge Cap Flashing = 5 pcs
Outside Gutter = 9 pcs
End Flashing = 6 pcs
20 pcs
Hardware Accessories
Tekscrews : x 9 = 540 pcs
Blind Rivets : x 30 = 600 pcs
Silicon Sealant : / 6 = 4 ctgs
Touch up Paint : / 250 = 1 can
Repairs
•Pagpintura ( Roof Re-painting)
•Sealant for leaks
•Sealant for holes
Maintenance
•Paglinis ng Alulod
(Panels & Gutter Cleaning)

You might also like