AoIP with MULTIPOINT A-INTERFACE

Preview

For internal use

2 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 Basic in Legacy 2G

MSS RANAP, BICC, SIP-I, SIP

Legacy 2G access
SIGTRAN H.248 NodeB
3G RAN

S
BSC BSSAP Iu-C
TC FSS /
CS CN, Other MSS system
Nb PLMN / PSTN
BTS MGW
Abis (TDM) Ater (TDM) A (TDM) Mb

M Mobile Broadband
b access (IMS)
TDM IP LTE
S

Fixed Broadband
PSTN access S
DSLAM

For internal use

3 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 2G with Introduce AoIP : TC in MGW

RANAP, BICC, SIP-I, SIP

“AoIP, TC in MGW” = MSS
Modernized &
Optimized 2G access
H.248 NodeB
3G RAN
BSSAP
BTS S
Iu-C
FSS /
BSC Nb
CS CN, Other MSS system
PLMN / PSTN
AoIP Mb
BTS Abis MGW
(TDM / IP) M Mobile Broadband
b access (IMS)
IP LTE
S
TDM
Fixed Broadband
access S
PSTN DSLAM

For internal use

4 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 Legacy and Target Configuration

Legacy Configuration Target Configuration

MSC in Pool MSC in Pool

MSC-S MSC-S MSC-S MSC-S

MGW MGW MGW MGW

MGw in Pool

BSC BSC BSC BSC

MIP only MIP with MGw Pool

Traffic from one BSC will be Traffic from one BSC will be
going to one MGw only load-shared to all MGW
For internal use
5 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 BSC Connection Final Plan

MSC_1 MSC_2 MSC_3 MSC_4

MGw_1 MGw_2 MGw_3 MGw_4 MGw_5

BSC_1 BSC_2 BSC_3 BSC_4 BSC_5

Mesh Control Plane  All MSC-S control all BSC

Mesh User Plane  Traffic from BSC to all MGw

For internal use

6 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 Connectivity Plan for 5 BSC
Control Plane

MSB01 MSB02 MML01 MML02

FH_KAMAL2 FH_KAYUN FH_MALANG3 FH_SITUBONDO FH_MADIUN2

Step 1 – Create mesh connection to all MSC-S

Step 2 – Activate only specific MSC-S as traffic handler
(BAR parameter in BSC or block MSC-S Sigtran)

For internal use

7 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 Connectivity Plan for 5 BSC in Indosat EJ
User Plane

MSB01 MSB02 MML01 MML02 MSB02

WSB01 WSB2 WML01 WMU01 WMU02

FH_KAMAL2 FH_KAYUN FH_MALANG3 FH_SITUBONDO FH_MADIUN2

Step 1 – Create mesh connection to all MGW

Step 2 – Activate only specific MGW as traffic handler (MGG
parameter in MSC)

For internal use

8 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 MSC in Pool and MGW Pool Testing

MSB01 MML02

WSB01 WMU02

FH_KAMAL2

For internal use

9 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
AoIP with MULTIPOINT A-INTERFACE
Step by step: Creation & Integration

For internal use

10 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 Existing Configuration (before Pooling):
SWU 0 & 1, Sigtran, Licence, Parameters
Existing SWU 0 & SWU 1:

Existing Sigtran:

Existing LK installed:

Existing Parameters (remain unchanged):

For internal use

11 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 Datafill for MSS Pooling (Multipoint A-Interface):
BSC Datafill

LLD:

BSC IP Address Allocation:

For internal use

12 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 Datafill for MSS Pooling (Multipoint A-Interface):
IP Address Allocation in E/// MSS & MGW

For internal use

13 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 Datafill for MSS Pooling (Multipoint A-Interface):
BSC-MSC Node

For internal use

14 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 Preparation (before Pooling)

• Make sure connection between BSC towards all E/// MSCs

• Make sure connection between ETPA towards all MGWs
Note: E/// MGW doesn’t support ping with big packet size
• Add new IP route towards E/// MSS in SWU 0 & 1
SWU-0_BSC_FKAMAL2(config)#ip route 10.202.211.0/27 10.243.177.10
SWU-0_BSC_FKAMAL2(config)# ip route 10.202.211.32/27 10.243.177.10
SWU-1_BSC_FKAMAL2(config)# ip route 10.202.211.0/27 10.243.177.14
SWU-1_BSC_FKAMAL2(config)# ip route 10.202.211.32/27 10.243.177.14

• Ping with “big packet” from all CPU BCSU to all E/// MSS
ZQRX:BCSU,1:::IP="10.202.180.130",SIZ=10000,;
ZQRX:BCSU,1:::IP="10.202.180.131",SIZ=10000,;
ZQRX:BCSU,1:::IP="10.202.180.138",SIZ=10000,;
ZQRX:BCSU,1:::IP="10.202.180.139",SIZ=10000,;
ZQRX:BCSU,1:::IP="10.202.211.34",SIZ=10000,;
ZQRX:BCSU,1:::IP="10.202.211.42",SIZ=10000,;
ZQRX:BCSU,1:::IP="10.202.211.35",SIZ=10000,;
ZQRX:BCSU,1:::IP="10.202.211.43",SIZ=10000,;

For internal use

15 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 Creation & Integration:
Part 1

• Create Safecopy Fallback before execution (mandatory)

• Transfer Multipoint A-Interface licence & set it to CONF
ZW7M:FEA=69:CONF:;

• Create the additional Sigtran towards all E/// MSC:

ZOYC:AMML02:C::;
ZOYE:AMML02:SCTP:;
ZOYA:AMML02:BCSU,1:SCTP:;
ZOYA:AMML02:BCSU,2:SCTP:;
ZOYA:AMML02:BCSU,1:SCTP:;
ZOYA:AMML02:BCSU,2:SCTP:;
ZOYM:AMML02:NETWORK=8:;
ZOYM:AMML02:REG=N:;
ZOYM:AMML02:SSNM=Y:;
ZOYP:M3UA:AMML02,0:"10.243.176.1","10.243.176.17",2907:"10.202.211.34",27,"10.202.211.42",27,2905:;
ZOYP:M3UA:AMML02,1:"10.243.176.2","10.243.176.18",2907:"10.202.211.34",27,"10.202.211.42",27,2905:;
ZOYP:M3UA:AMML02,2:"10.243.176.1","10.243.176.17",2908:"10.202.211.35",27,"10.202.211.43",27,2905:;
ZOYP:M3UA:AMML02,3:"10.243.176.2","10.243.176.18",2908:"10.202.211.35",27,"10.202.211.43",27,2905:;

For internal use

16 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 Creation & Integration:
Part 2

• Create IP Signalling Link Set & Signalling Route Set

ZNSP:NA0,D'3071,MML02:18:AMML02:;
ZNRC:NA0,D'3071,MML02,6,,:,,,7::::;

• Activate the Additional Sigtran & Association

ZNLA:18:;
ZOYS:M3UA:AMML02,0:ACT:;
ZOYS:M3UA:AMML02,1:ACT:;
ZOYS:M3UA:AMML02,2:ACT:;
ZOYS:M3UA:AMML02,3:ACT:;
ZNLC:18,ACT:;

• Activate Route Set, SCCP, BSSAP & set broadcast status

ZNVA:NA0,D'3071::;
ZNVC:NA0,BFF::ACT:;
ZNFD:NA0,BFF,1:FE,BSSAP,1,::;
ZNGC:NA0,BFF:ACT:;
ZNHC:NA0,BFF:FE:ACT:;
ZOBC:NA0,BFF,FE::Y:;
ZOBM:NA0,CC8,FE:NA0,BFF:Y:;

For internal use

17 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 Creation & Integration:
Part 3

• Define the NRI to SPC mapping tables

ZE7M:SPC=BEF:MCC=510,MNC=01,CNID=1603:;
ZE7A:BEF::NRI=41&42&43:;
ZE7A:BFF:WEIGHT=1,MCC=510,MNC=01,CNID=1602,NULLNRI=0,STATE=0:NRI=38&39&40:;

• Change the default SPC

ZE7M:DEFSPC=BEF::;

• Define the load balancing method & Weight

Example: ZE7M:LOAD=1::;
ZE7M:SPC=BEF:WEIGHT=1,:;

• Define the NAS node selection method

Example: ZE7M:NASNODE=1;

• Define the CS NAS node selection method to be used for

all traffic
ZE7M:FCDMODE=1;

For internal use

18 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 Creation & Integration:
Part 4
• Set the state of Multipoint A Interface feature to ON
ZW7M:FEA=69:ON;

• Define the Null NRI for Default SPC

ZE7M:SPC=BEF:NULLNRI=0;

• Define the NRI length

ZE7M:LENGTH=6;

• Change state of MSC for the NAS node (if needed)

ZE7M:SPC=BEF:STATE=0;

• Define the CS NAS node selection is used only for traffic

with a null NRI value (after E/// inform that traffic is balance)
ZE7M:FCDMODE=0;

• Change timer for periodic MS location update in all BTS (if

neccesary)
ZEQJ:BTS=XXX:PER=0.1;

• Restart the BSC

ZUSS:SYM::STMU,ETPA,ET:;

For internal use

19 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 MNS Parameter After BSC Restart

For internal use

20 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
 Configuration After MSS Pooling:
SWU 0 & 1, Sigtran, Licence, Parameters
SWU 0 & SWU 1:

Sigtran:

LK installed:

Parameters (remain unchanged):

For internal use

21 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012
THANK YOU… 

For internal use

22 © Nokia Siemens Networks AoIP with Multipoint A-Interface / Setyobudi / Oct 5, 2012