GPON –Fundamentals

－－Technical Team from FTTH

Marketing Department
 Contents
Basic Concepts of PON
Overview of Optical Access Network
Analysis of GPON Standards
GPON Key Technologies
GPON Management and Service Provisioning
Basic Services over GPON Network

. Page 2
 Basic Concepts of PON

This chapter describes the basic concepts and working principle of

PON network. After reading it, you will have a preliminary understanding
on the PON network.
This chapter introduces the basic architecture, upstream and
downstream working principle of the PON network.

. Page 3
What is PON?
Passive Optical Network
Passive Optical
Splitter ONU
Optical Line Terminal

ONU

PSTN

Internet OLT Passive Optical

Splitter
ONU

CATV Optical Network Unit

 PON is a kind of passive optical network featuring one-to-multiple-point

architecture;
 PON is short for Passive Optical Network ;
 PON consists of Optical Line Terminal (OLT), Optical Network Unit (ONU) and
Passive Optical Splitter.

. Page 4
Why GPON?
<1Mbps 3M 8M 25M 100M BD

Access ADSL/ADSL2+ VDSL / ADSL2+ PON

Technology Copper Based Copper Based Fiber Based

Coverage ~5km
<3km <2km <1km
diameter

Internet VoD Live TV

Service
Video conferencing HDTV VoD
requirements Game
Remote control HDTV

2002 2003 2006 2010

• GPON（Gigabit-capable Passive Optical Networks） Time

• GPON supports Triple－play service, providing competitive all-service solution.

• GPON supports high-bandwidth transmission to break down the bandwidth
bottleneck of the access over twisted pair cables, so as to satisfy the
requirements of high-bandwidth services, such as IPTV and live TV broadcasts.
• GPON supports the long-reach (up to 20 km) service coverage to overcome the
obstacle of the access technology over twisted pair cables and reduce the
network nodes.
• With complete standards and high technical requirements, GPON supports
integrated services in a good way.
• GPON is the choice of large carriers in the international market.

. Page 5
Concepts

APON: ATM Passive Optical Networks

EPON: Ethernet Passive Optical Networks
GE-PON: Giga-bit Ethernet Passive Optical Networks
GPON: Gigabit-capable Passive Optical Networks

. Page 6
GPON Principle----Data Multiplexing

GPON adopts Wavelength Division Multiplexing (WDM) technology, facilitating bi-direction

communication over a single fiber.

1490nm

1310nm

To separate upstream/downstream signals of multiple users over a single fibre, GPON adopts
two multiplexing mechanism:
– In downstream direction, data packets are transmitted in a broadcast manner;
– In upstream direction, data packets are transmitted in a TDMA manner.

. Page 7
GPON Principle----Downstream Data

Broadcast mode

. Page 8
GPON Principle----Upstream Data

 TDMA mode

. Page 9
Comparison Between GPON and EPON
GPON EPON

Standard ITU.T IEEE

Rate 2.488G/1.244G 1.25G/1.25G

Split ration 1:64~1:128 1:16~1:32

Data encapsulation mode GEM/ATM Ethernet

Broadband efficiency 92% 72%

Line encoding NRZ 8B/10B

Power budget Class A/B/C Px10/Px20

Ranging Equalized logical reach RTT

by adjusting EqD

DBA Standard format Defined by vendors

TDM support CESoP / Native CESoP

ONT interconnectivity OMCI None

OAM powerful Weak, extended by vendors

Application mode Multi-service/ FTTx Pure data service

Maturity Large vendors involved Small vendors involved

Choice of carriers Carriers Enterprise Intranet

. Page 10
 Overview of Optical Access Network

This chapter describes the architecture of the optical access network.

After reading it, you will have a understanding on the FTTx network.
Besides, this chapter describes various devices applied in the FTTx
network and you can get a knowledge of those devices applied in the
optical access network.

. Page 11
 Architecture of Optical Access Network
CO Customer
Premise
3.5-5km
xDSL 2~20Mbps Remote Business
BA DSLAM

ODN Curb

2.5Gbps Down /1.25Gbps Up

FTTC OLT

MDU
Multi-Dwelling Unit
2.5Gbps Down /1.25Gbps Up
FTTB OLT

ONU
Optical Networks Unit
2.5Gbps Down /1.25Gbps Up
FTTH OLT
ONT
Optical Line Termination Optical Networks Termination

. Page 12
What is Optical Access Network?
From the architecture diagram, the optical access network comprises the following
scenarios:
1. FTTB scenario
As an access scenario for business users, Fiber to The Business (FTTB) scenario falls
into single business unit (SBU) and Business Multi-tenant unit (MTU) in terms of capacity.
Of them, SBU provides a comparatively small number of ports, including following types:
POTS, 10/100/1000BASE-T, RF(33dBmV), and DS1/T1/E1 ports; MTU provides a
comparatively larger number of ports, including following types: POTS,
10/100/1000BASE-T, RF and DS1/T1/E1 ports.
2. FTTC & FTTCab scenario
As an access to the curb or the cabinet over fibre, Fiber to The Curb& Fiber to The
Cabinet (FTTC & FTTCab) scenario is for the Multi-dwelling unit (MDU), providing a
comparatively larger number of ports, including following types: 10/100/1000BASE-T,
RF(33dBmV), VDSL2, and so on.
3. FTTH scenario
As an access to the home over fibre, Fiber to The Home (FTTH ) scenario is mainly for
the single family unit (SFU), providing a comparatively small number of ports, including
following types: POTS, 10/100/1000BASE-T, and RF(18dBmV).

. Page 13
 Analysis of GPON Standards

This chapter analyses major GPON standards. After reading it,

you will have a understanding on the module reference, performance,
frame structure, as well as basic terms of GPON network, such
as GEM, port and T-CONT.

. Page 14
 GPON Standards
ITU-T G.984.1 ITU-T G.984.2
• Parameter description of GPON network • Specifications of ODN parameters
• Requirements of protection switch-over • Specifications of 2.488Gbps downstream optical port
networking • Specifications of 1.244Gbps upstream optical port
• Overhead allocation at physical layer

Simple development process

Powerful compatibility

ITU-T G-984.1/2/3/4
ITU-T G.984.3
• Specifications of TC layer in the GPON system
ITU-T G.984.4
• GTC multiplexing architecture and protocol
• OMCI message format
stack
• OMCI device management frame
• GTC frame
• OMCI working principle
• ONU registration and activation
• DBA specifications
• Alarms and performance

. Page 15
 GPON Network Model Reference
UNI R/S ODN S/R SNI

ONU/ONT OLT Service node

WDM WDM V reference point

T reference point IFpon IFpon
Optical
splitter NE
NE

ONU Optical Network Unit

ONT Optical Network Terminal
ODN Optical Distribution Network
OLT Optical Line Terminal
WDM Wavelength Division Multiplex Module
NE Network Element
SNI Service Node Interface
UNI User Network Interface

. Page 16
 Basic Performance Parameters of GPON
 GPON identifies 7 transmission speed combination as follows:
0.15552 Gbit/s up, 1.24416 Gbit/s down
0.62208 Gbit/s up, 1.24416 Gbit/s down
1.24416 Gbit/s up, 1.24416 Gbit/s down
0.15552 Gbit/s up, 2.48832 Gbit/s down
0.62208 Gbit/s up, 2.48832 Gbit/s down
1.24416 Gbit/s up, 2.48832 Gbit/s down
2.48832 Gbit/s up, 2.48832 Gbit/s down
Among them, 1.24416 Gbit/s up, 2.48832 Gbit/s down is the mainstream
speed combination supported at current time.

 Maximum logical reach: 60 km

 Maximum physical reach: 20 km

 Maximum differential fibre distance: 20 km

 Split ratio: 1：64, it can be up to1：128

. Page 17
 GPON Network Protection Mode
 No backup on devices.
 When the primary fibre fails, the
ONU#1
services on the fibre transfers to
1：N optical splitter IFpon the secondary fibre.

OLT
 Service outage occurs, and the
Protected area outage duration depends on the
IFpon time of line recovery.
Secondary fibre ONU#N  When the disconnection occurs to
the line from splitter to ONU,
IFpon service outage will occur and no
Type A Fibre backup backup happens.

 OLT provides two GPON interfaces.

 This type protects the primary fibre.
ONU#1 When the primary fibre fails, the
services on the fibre transfers to the
OLT IFpon
2：N optical splitter secondary fibre.


 The protected objects are restricted
IFpon Protected area
to the fibre from the OLT to the
ONU and boards of the OLT. For
IFpon ONU#N faults occur to other parts, no
protection is provided. With potential
Type B OLT interface backup IFpon
security problems, it cannot
satisfies customer’s requirements.
 Fault location fails.

. Page 18
 GPON Network Protection Mode
 Both the OLT and the ONT
ONU#1 provides two GPON interfaces.
GPON interfaces on the OLT
IFpon work in 1:1 mode.
IFpon

OLT
2：N optical splitter
  This type is a kind of whole-
network protection. Two routes
are provided between OLT and
ONU, ensuring recovery of
IFpon various faults.
Whole-network protection  When the primary PON port on
IFpon the ONU or user line fails, ONU
automatically transfers services
to the secondary PON port. In
this way, services goes
2：N optical splitter ONU#N upstream through the secondary
IFpon line and secondary port on the
IFpon OLT. Basically, service outage
will not occur.
Type C All-backup  It is complex to realize it and not
cost-effective.
 One port stays at idle state all
the time, causing low bandwidth
utilization.

. Page 19
 GPON Network Protection Mode

 OLT provides two GPON

interfaces. The GPON
interfaces work in 1＋1
ONU#1
mode.
IFpon  This type is a kind of
IFpon whole-network protection.
1：2 optical splitter 2：N optical splitter Two routes are provided
OLT between OLT and ONU,
ensuring recovery of
various faults, Including
IFpon Protected area of ONUs
Whole-network protection faults occurring on optical
splitters or the line.
IFpon with a single port
 It supports using mixed
ONUs in the network:
ONUs either with a single
ONU#N PON port or with two
1：2 optical splitter 2：N optical splitter
PON ports can be used.
IFpon Users can select them
based on the actual
needs.
Type D Mixed backup
 It is complex to realize it
and not cost-effective.

. Page 20
 GPON Multiplexing Architecture
OLT ONT
Port
GEM Port GEM Port
O T-CONT Port
Port T-CONT
N
U T-CONT
Port
Port
T-CONT
O
IFpon Port
N T-CONT
 GEM Port: the minimum unit for carrying services.
Port
U  T-CONT: Transmission Containers is a kind of Buffer
that carries services. It is mainly used to transmit
upstream data units. T-CONT is introduced to realize
O the dynamic bandwidth assignment of the upstream
N T-CONT Port bandwidth, so as to enhance the utilization of the line.
 IF pon: GPON interface.
U
 Base on the mapping scheme, service traffic is carried
to different GEM ports and then to different T-CONTs.
Port-ID The mapping between the GEM port and the T-CONT
ONU-ID is flexible. A GEM Port can correspond to a T-CONT; or
identifies Alloc-IDs identifies identifies GEM
ports multiple GEM Ports can correspond to the same T-
ONUs T-CONTs
CONT.
 A GPON interface of an ONU contains one or multiple
T-CONTs.

. Page 21
 OLT Functional Blocks
Cross
PON Core Shell Service Shell
Connect Shell

PON interface PON TC Service

function function adaptation

Cross
Connection
function

PON interface PON TC Service

function function adaptation

 PON core shell consists of two parts: PON interface function and PON TC function. PON TC
function includes framing, media access control, OAM, DBA, and delineation of Protocol Data
Unit (PDU) for the cross connect function, and ONU management.
The Cross-connect shell provides a communication path between the PON core
shell and the Service shell, as well as cross-connect functionality.
Service Shell provides translation between service interfaces and TC frame
interface of the PON section.

. Page 22
ONU/ONT Functional Blocks
PON Core Shell Service Shell

Service
adaptation
PON interface PON TC
function function
MUX/
DEMUX

PON interface PON TC

function function
Service
adaptation

 The functional building blocks of the G-PON ONU are mostly similar to the
functional building blocks of the OLT. Since the ONU operates with only a single
PON Interface (or maximum 2 interfaces for protection purposes), the cross-
connect function can be omitted. However, instead of this function, service MUX
and DMUX function is specified to handle traffic.

. Page 23
GPON Frame Structure
Downstream Framing
125us
Physical Control Block
Downstream (PCBd)
Upstream
Payload
Bandwidth Map ONT1

AllocID Start End AllocID Start End

1 100 200 2 300 500

OLT

T-CONT1 T-CONT 2
(ONT 1) (ONT 2)
Slot Slot Slot Slot
100 200 300 500

ONT64
PLOu PLOAMu PLSu DBRu Payload x DBRu Y Payload y

Upstream Framing

. Page 24
GPON Upstream Frame Structure
Upstream Framing

PLI Port ID PTI HEC

GEM Frame GEM Full GEM Frame

header fragment header frame header fragment

DBA Report Pad if needed

PLOu PLOAMu PLSu DBRu x Payload x DBRu y Payload y PLOu DBRu z Payload z

ONT A ONT B
DBA CRC
1,2,4bytes 1 bytes
Preamble Delimiter BIP ONU-ID Ind Msg ID Message CRC
ONU ID
A bytes B bytes 1 bytes 1 bytes 1 bytes 1 bytes 10 bytes 1 bytes

. Page 25
GPON Downstream Frame Structure
Downstream Framing
125us

PCBd Payload PCBd Payload

n n n+1 n

Psync Ident Reserved BIP Plend Plend US BW Map

4 bytes 4 bytes 13 bytes 1 bytes 4 bytes 4 bytes N*8 bytes

Coverage of this BIP Coverage of next BIP

FEC Ind Reserved Super-frame Blen BW Map Alen ATM Partition CRC
1 bit 1 bit Counter 30 bits Length 12 bits Length 12 bits 8 bits

Access 1 Access 2 Access n

…..
8 bytes 8 bytes 8 bytes

Alloc ID Flags SStart SStop CRC

12 bits 12 bits 2 bytes 2 bytes 1 byte

Send PLS Send PLOAMn Use FEC Send DBRu Reserved

1 bit 1 bit 1 bit 2 bits 7 bits

. Page 26
Mapping of TDM Service in GPON

TDM Buffer GEM Frame

PLI
Ingress buffer Port ID
PTI
HEC

TDM
TDM data Payload
TDM fragment

 TDM frames are buffered and queued as they arrive, then TDM data is multiplexed
in to fixed-length GEM frames for transmission.
 This scheme does not vary TDM services but transmit TDM services transparently.
 Featuring fixed length, GEM frames benefits the transmission of TDM services .

. Page 27
Mapping of Ethernet Service in GPON

Ethernet Packet GEM Frame

PLI
Inter packet gap
Port ID 5 bytes
Preamble PTI
SFD CRC

DA

SA GEM
Length\Type Payload

MAC client data

FEC
EOF

 GPON system resolves Ethernet frames and then directly maps the data of frames
into the GEM Payload.
 GEM frames automatically encapsulate header information.
 Mapping format is clear and it is easy for devices to support this mapping. It also
boasts good compatibility.

. Page 28
 GPON Key Technologies

This chapter describes GPON key technologies. After reading it,

you will have a understanding on key technologies of GPON, such as
ranging, equalization delay (EqD), dynamic bandwidth assignment (DBA),
QoS and optical power.

. Page 29
 GPON Key Technologies----
Burst Optical/Electric Technology
Continuous transmitting units Burst transmitting units
0# ONU 0# ONU

1# ONU
1# ONU

0# ONT
0# ONT
 Fast-enable and disable ability

 Split ratio (>10dB)

Signals arrive at OLT and

Data recovered Signals sent from ONT/ONU
threshold is specified

Continuous transmitting units

0# ONU
Non- fast AGC receiving

Burst receiving units 1# ONU

0# ONT

Fast AGC receiving Threshold line

. Page 30
GPON Key Technologies----Ranging
 OLT obtains the Round Trip Delay (RTD) through ranging process, then specifies
suitable Equalization Delay (EqD) so as to avoid occurrence of collision on optical
splitters.
 To acquire the serial number and ranging, OLT needs open a window, that is, Quiet
Zone, and pauses upstream transmitting channels on other ONUs.
OLT
ONU1
Start of D/S Frame

'Zero Distance' EqD Sstart

Assigned EqD
ONU2
Pre-Assigned
EqD

OLT ONU3
Actual Reception

Desired Start of
of S/N Resonse

Desired Reception
of SN Response
U/S Frame

ONU
Pre-Assigned
Response
EqD Sstart
Time
ONU in
Ranging
Transmission of S/N Response
for Pre-ranged ONU
Reception of D/S Frame

Start of U/S Frame

state
U/S BW Map
containing
Ranging Request

. Page 31
DBA
What is DBA?
--- DBA, Dynamic Bandwidth Assignment
--- DBA is a scheme facilitating dynamic bandwidth assignment at an interval of ns and us.

Why DBA?
--- It enhances the uplink bandwidth utilization of PON ports.
--- More users can be added on a PON port.
--- Users can enjoy higher-bandwidth services, especially those requiring comparatively
greater change in terms of the bandwidth.

. Page 32
 SLA: Service－Level Agreement
DBA Working Principle BW: Bandwidth
Maximum: maximum bandwidth
Guaranteed: guaranteed bandwidth
Minimum: minimum bandwidth

 Based on service priorities, the system sets SLA for each ONU, restricting service bandwidth.
 The maximum bandwidth and the minimum bandwidth pose limits to the bandwidth of each ONU, ensuring
various bandwidth for services of different priorities. In general, voice service enjoys the highest, then video
service and data service the lowest in terms of service priority.
 OLT grants bandwidth based on services, SLA and the actual condition of the ONU. Services of higher priority
enjoy higher bandwidth.

. Page 33
T-CONT Bandwidth Terms

 Transmission Containers (T-CONTs): it dynamically receive grants delivered by

OLT. T-CONTs are used for the management of upstream bandwidth allocation
in the PON section of the Transmission Convergence layer. T-CONTs are
primarily used to improve the upstream bandwidth use on the PON.
 T-CONT type falls into FB, AB, NAB, and BE.
 Five T-CONT types: Type1, Type2, Type3, Type4, and Type5.

. Page 34
 QoS Mechanism of ONU in GPON

VOIP
Traffic-flow Service
Scheduling differentia
VOD GPON
DATA And buffer based on
TDM control 802.1p

Service traffic based on

OLT GEM Port-id
Splitter

VOIP
Traffic-flow Service
VOD Scheduling differentia
GPON based on
DATA And buffer
TDM control 802.1p

 Traffic classification of services based on LAN/802.1p.

 Service scheduling based on the combination of strict priority (SP) and Weighted Round Robin
(WRR) algorithms.
 Service transmission based on service mapping with different T-CONTs, enhancing line utilization
and reliability.

. Page 35
QoS Mechanism of OLT in GPON

802.1p
Ethernet
VOIP
COS
bridging
BTV
GE/10GE Queuing &
DATA Non- GPON
BSR scheduling
TDM blocking
switching DBA GPON

OLT
Upstream service
traffic based on
different VLANs
TDM Gateway
PSTN

 Traffic classification based on VLAN/802.1p.

 Service scheduling based on combination of strict priority (SP) and Weighted
Round Robin (WRR) algorithms.
 DBA algorithm, enhancing uplink bandwidth utilization.
 Access control list (ACL)-based access control on layers above layer-2.

. Page 36
AES Encryption in GPON

1 1 1 End User
ONT
1
Decryption

1 3 2 1 3 1 1 3 2 1 3 1 End User
OLT ONT 2
2
Encryption Decryption

3 3 End User
AES: Advanced Encrypt System ONT
3
A globally-used encryption algorithm Decryption

 OLT applies Advanced Encryption Standard (AES) 128 encryption.

 GPON supports encrypted transmission in downstream direction, such as AES128 encryption.
 In the case of GEM fragments, only the payload will be encrypted.
 GPON system initiates AES key exchange and switch-over periodically, improving the reliability
of the line.

. Page 37
 FEC
9720 TSs

Short
Codeword Codeword Codeword Codeword Codeword Codeword
codeword

Parity

Parity

Parity

Parity

Parity

Parity

Parity
PCBd Data Data bytes Data bytes Data bytes Data bytes Data bytes Data
bytes bytes

Data bytes of Data bytes of Data bytes of Data bytes of Data bytes of Data bytes of
codeword #1 codeword #2 codeword #3 codeword #4 codeword #5 codeword #6

PCBd Payload (Data bytes)

9108 TSs

 FEC is Forward Error Correction.

 It is a algorithm based on Reed-Solomon, a Block based code. FEC code comprises fixed-
length data block and redundancy bits.
 Applying FEC algorithm on the transmission layer, GPON will drop the error bit rate of the
line transmission to 10-15, and avoid retransmission of data.
 GPON supports FEC in the downstream direction.
 Processing of PCBd and Payload improves the transmission quality.

. Page 38
 Optical Power Attenuation

 Power attenuation calculation of Optical splitter

 Input attenuation of optical splitter(<1dB):

∑(Power_input) - ∑(Power_output of all branch)

Input 1:2 optical Output ∵ 10 log(0.5) = - 3.01

∴
splitter Attenuation of 1:2 splitter: 3.01 dB
Attenuation of 1:16 splitter: 12.04 dB
Attenuation of 1:64 splitter :18.06 dB

Output
Input

2:N optical
splitter

. Page 39
Fibre Attenuation and Power Budget
 Fibre attenuation relates to the fibre length
 The attenuation of fibre splicing point is About 0.35 dB per km
generally less than 0.2dB for 1310,1490nm
 Other factors may cause attenuation, such
as fibre bending

Huawei’s OLT and ONU

28 dB (Class B+)
Table G.984.2 – Classes for optical path loss

Class A Class B Class B＋ Class C

Minimum loss 5 dB 10 dB 13 dB 15 dB

Maximum loss 20 dB 25 dB 28 dB 30 dB

NOTE – The requirements of a particular class may be more stringent for one
system type than for another, e.g. the class C attenuation range is inherently
more stringent for TCM systems due to the use of a 1:2 splitter/combiner at
each side of the ODN, each having a loss of about 3 dB.

. Page 40
Parameters of GPON Interfaces (Class B+)

Items Unit Single fibre

OLT: OLT

•Mean launched power MIN dBm +1.5

•Mean launched power MAX dBm 5

•Minimum sensitivity dBm -28

•Minimum overload dBm -8

•Downstream optical penalty dB 0.5

ONU: ONU

•Mean launched power MIN dBm 0.5

•Mean launched power MAX dBm 5

•Minimum sensitivity dBm -27

•Minimum overload dBm -8

•Upstream optical penalty dB 0.5

. Page 41
 GPON Management and Service Provisioning

This chapter describes GPON management and service provisioning.

After reading it, you will have a understanding on OMCI
(the management and maintenance message type) and ONT service
implementation.

. Page 42
Basic Message Types in GPON Management
OAM message at the physical layer falls into three types: embedded
OAM, PLOAM and OMCI .

 The embedded OAM and PLOAM channels manage the functions of

the PMD and the GTC layers. The OMCI provides a uniform system of
managing higher (service defining) layers.
 The embedded OAM channel is provided by field-formatted
information (such as BW Map，DBRu) in the header of the GTC frame.
The functions that use this channel include: bandwidth granting, Dynamic
Bandwidth Assignment signalling and so on.
 The OMCI channel is used to manage the service defining layers that
lay above the GTC.

. Page 43
 GPON System Management Mode

iManager N2000 BMS ACS

Client

SNMP
TR069

OMCI
ONT OLT BRAS

 ONT Plug and Play

 Zero configuration
 ONT Centered Management
 ONT remote diagnosis
 Remote ONT maintenance and management through OMCI
 Auto configuration and management on ONT through TR069
 ONT Auto Service Provisioning

. Page 44
GPON Service Provisioning and Zero
Configuration on Terminals
Carriers’ nightmare
Flexible Configuration plan of GPON
Initial configurations (such as service system information
configuration, data configuration) are required on GPON supports zero configuration on
terminals and then they can be put into use. To finish terminals and plug-and-play of terminals,
these configurations, it is not cost-effective to carriers. which is cost-effective.

Application scenario

1 Subscribe for services

CRM Order Management Service Provisioning Billing

2 Configure service network

NMS 2000

3 Send terminals to users

1 Finish the auto-configuration of OLT

Access Network
Use OMCI to finishing data
configuration on ONT 3

2
STB ONT ONT
Start up ONT and make registration with serial number ONT
User ONT

. Page 45
 VOIP Service Management Solution in GPON
Description Basic operation and maintenance process

Terminal activation

Daily management
Service provisioning
Maintenance personnel use activation code generator to generate
terminal activation code (including IADMS IP, PPPoE user name
and password). Users input activation code on terminals,
terminals register on IADMS upon power-up and the IADMS
makes auto-configuration on terminals.
Process and Networking

1 for services
Subscribe

CRM Order Management Service Provisioning Billing

Generating
4 activation code
UMS
3 Configure IADMS 2 Configure SoftX
Activation code generator IADMS

5
Send activation code and terminal to users 7
Configure terminals automaticallythroughTR069
Access Network SoftX3000

6 Input activation code

ONT ONT
User Phone Phone Phone Phone

. Page 46
 Basic Services over GPON Network

This chapter describes basic services provided by GPON

System, such as Triple-play, TDM and RF overlay services.

. Page 47
Triple Play Solution in GPON

BB service platform
PC TL1/CORBA VoD Server
/API Notification
Middle
SFU Carrier’s OSS
ware
IPTV
NMS

Phone

Ethernet Intern
MDU IP Core et
CPE
MSE
Splitter OLT

PC
SBU BRAS
Phone AAA Server
Softswitch

CBU
Base station
FE
E1
IP

Voice

CPE ODN NSP ASP/ISP

. Page 48
TDM Service Solution in GPON

PBX

CESoP mode  With fixed

E1/T1 Native mode upstream/downstream
frame structure, periodic
multiframes are
ONT transmitted in GPON
ODN
line. So, GPON can
PSTN transmit TDM service with
first-born advantage.
BUSINESS

Splitter OLT E1/T1 LE OLT supports processing TDM

service in Native and CESoP
ONT
ONT
CO modes.
 With guaranteed QoS, GPON ensures the parameter
FE indexes of TDM service, such as end-to-end delay,
E1/T1 Jitter and error bit rate.

PBX
 GPON supports effective isolation and higher-priority
processing of TDAM service.

. Page 49
RF Overlay Service Solution in GPON

Video
EDFA
（Erbium Doped Fiber Amplifier） 1550nm

Central Voice/Data
Customer

Office Downstream Premises

Voice/Data& Video
1490nm
1490/1310nm，1550nm
Optical
OLT ONU
Couplers (Optical Network Terminal)
(Optical Line Terminal)
（WDM）

Upstream 1490nm Optical Splitter

Video IP
Upstream Downstream （RF）
1310nm 1490nm 1550nm
Voice and Data Voice and Data
Video
@1250Mbps @2500Mbps

42Mhz 550Mhz 860Mhz

Analog TV Digital TV HD/VOD

. Page 50