1

Lecture 6: AC machinery fundamentals

Instructor:
Dr. Gleb V. Tcheslavski
Contact:
[email protected]
Office Hours:
TBD; Room 2030
Class web site:
http://ee.lamar.edu/gleb/Ind
ex.htm

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 2

Preliminary notes

AC machines are AC motors and AC generators.

There are two types of AC machines:
Synchronous machines – the magnetic field current is supplied by a
separate DC power source;
Induction machines – the magnetic field current is supplied by magnetic
induction (transformer action) into their field windings.
The field circuits of most AC machines are located on their rotors.
Every AC (or DC) motor or generator has two parts: rotating part (rotor)
and a stationary part (stator).

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 3

The rotating magnetic field

The basic idea of an electric motor is to generate two magnetic fields:

rotor magnetic field and stator magnetic field and make the stator field
rotating. In this situation, the rotor will constantly turning to align its
magnetic field with the stator field.
The fundamental principle of AC machine operation is to make a 3-
phase set of currents, each of equal magnitude and with a phase
difference of 120o, to flow in a 3-phase winding. In this situation, a
constant magnitude rotating field will be generated.
The 3-phase winding consists of 3 separate windings spaced 120o
apart around the surface of the machine.

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 4

The rotating magnetic field

Consider a simple 3-phase stator containing .

three coils, each 1200 apart. Such a winding will
produce only one north and one south magnetic x x
pole; therefore, this motor would be called a two-
pole motor.
Assume that the currents in three coils are:
i (t )  I sin t . .
 aa ' M

ibb ' (t )  I M sin t  120 
0
(6.4.1)
 x
icc ' (t )  I M sin t  240 
0

Into the page

The directions of currents are indicated.
Therefore, the current through the coil aa’ produces the magnetic field intensity

H aa ' (t )  H M sin t0 (6.4.2)

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 5

The rotating magnetic field

where the magnitude of the magnetic field intensity is

changing over time, while 00 is the spatial angle of the
magnetic field intensity vector. The direction of the field
can be determined by the right-hand rule.
Note, that while the magnitude of the magnetic field
intensity Haa’ varies sinusoidally over time, its direction
is always constant. Similarly, the magnetic fields
through two other coils are
H bb ' (t )  H M sin t  120  120
(6.5.1)
H cc ' (t )  H M sin t  240  240
The magnetic flux densities resulting from these magnetic field intensities can be
found from
B  H (6.5.2)

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 6

The rotating magnetic field

Baa ' (t )   H M sin t 0

Bbb ' (t )   H M sin t  120  120 (6.6.1)

Bcc ' (t )   H M sin t  240  240

At the time t = 0 (t = 0) :
Baa ' (t )  0 (6.6.2)

Bbb ' (t )   H M sin  120  120 (6.6.3)

Bcc ' (t )   H M sin  240  240 (6.6.4)

The total magnetic field from all three coils added together will be
 3   3 
Bnet  Baa '  Bbb '  Bcc '  0    HM  120   HM  240  1.5 H M   90 (6.6.5)
 2   2 

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 7

The rotating magnetic field

At the time when t = 900:

Baa ' (t )   H M 0 (6.7.1)

Bbb ' (t )   H M sin  120  120  0.5 H M 120 (6.7.2)

Bcc ' (t )   H M sin  240  240  0.5 H M 240 (6.7.3)

The total magnetic field from all three coils added together will be
Bnet  Baa '  Bbb '  Bcc '   H M 0   0.5 H M  120   0.5 H M  240
 1.5 H M 0 (6.7.4)

We note that the magnitude of

the magnetic field is constant
but its direction changes.
Therefore, the constant
magnitude magnetic field is
rotating in a counterclockwise
direction.
ELEN 3441 Fundamentals of Power Engineering Spring 2008
 8

The rotating magnetic field: proof

The magnetic flux density in the stator at any .

arbitrary moment is given by
x x
Bnet (t )  Baa ' (t )  Bbb ' (t )  Bcc ' (t )
  H M sin t 0   H M sin t  120  120
  H M sin t  240  240 (6.8.1)

Each vector can be represented as a sum of x

. .
and y components:
x
Bnet (t )   H M sin txˆ
3
0.5 H M sin t  120 xˆ   H M sin t  120  yˆ
2 (6.8.2)
3
0.5 H M sin t  240 xˆ   H M sin t  240  yˆ
2

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 9

The rotating magnetic field: proof

Which can be rewritten in form

Bnet (t )    H M sin t  0.5 H M sin t  120   0.5 H M sin t  240   xˆ
 3 3 
  H M sin t  120    H M sin t  240   yˆ
 2 2 
 1 3 1 3 
   H M sin t   H M sin t   H M cos t   H M sin t   H M cos t  xˆ
 4 4 4 4 
 3 3 3 3 
   H M sin t   H M cos t   H M sin t   H M cos t  yˆ (6.9.1)
 4 4 4 4 
Finally: Bnet (t )  1.5 BM sin t  xˆ  1.5 BM cos t  yˆ (6.9.2)

The net magnetic field has a constant magnitude and rotates counterclockwise
at the angular velocity .

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 10

Relationship between electrical

frequency and speed of field rotation
The stator rotating magnetic field can be
represented as a north pole and a south pole.
These magnetic poles complete one mechanical
rotation around the stator surface for each
electrical cycle of current. Therefore, the
mechanical speed of rotation of the magnetic field
equals to the electrical frequency.
f e [ Hz ] f m [rps] 
two poles (6.10.1)
e [rad / s]m [rad / s]
The magnetic field passes the windings of a two-pole stator in the following
counterclockwise sequence: a-c’-b-a’-c-b’. What if 3 additional windings will be
added? The new sequence will be: a-c’-b-a’-c-b’-a-c’-b-a’-c-b’ and, when 3-phase
current is applied to the stator, two north poles and two south poles will be
produced. In this winding, a pole moves only halfway around the stator.

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 11

Relationship between electrical

frequency and speed of field rotation
The relationship
between the electrical
angle e (current’s
phase change) and
the mechanical angle
m (at which the
magnetic field rotates)
in this situation is:

e  2m (6.11.1)

Therefore, for a four-pole stator:

f e [ Hz ] f m [rps] 
 four poles (6.11.2)
e [rad / s]m [rad / s]

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 12

Relationship between electrical

frequency and speed of field rotation
For an AC machine with P poles in its stator:
P
e  m (6.12.1)
2
P
fe  fm (6.12.2)
2
P
e  m (6.12.3)
2
Relating the electrical frequency to the motors speed in rpm:

P
fe  nm (6.12.4)
120

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 13

Reversing the direction of field

rotation
If the current in any two of the three coils is swapped, the direction of
magnetic field rotation will be reversed. Therefore, to change the direction
of rotation of an AC motor, we need to switch the connections of any two
of the three coils.
In this situation, the net magnetic flux density in the stator is
Bnet (t )  Baa ' (t )  Bbb ' (t )  Bcc ' (t )
 BM sin t0  BM sin t  240  120  BM sin t  120  240 (6.13.1)

 3 
Bnet (t )  BM sin txˆ  0.5BM sin t  240   xˆ   BM sin t  240   yˆ
 2 
 3 
 0.5BM sin t  120   xˆ   BM sin t  120   yˆ (6.13.2)
 2 

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 14

Reversing the direction of field

rotation
Bnet (t )  BM sin t  0.5BM sin t  240   0.5BM sin t  120   xˆ
 3 3 
 BM sin t  240   BM sin t  120   yˆ (6.14.1)
 2 2 
Therefore:
 1 3 1 3 
Bnet (t )  BM sin t  BM sin t  BM cos t  BM sin t  BM cos t  xˆ
 4 4 4 4 
 3 3 3 3 
  BM sin t  BM cos t  BM sin t  BM cos t  yˆ (6.14.2)
 4 4 4 4 
Finally:
Bnet (t )  1.5 BM sin t  xˆ  1.5 BM cos t  yˆ (6.14.3)

The net magnetic field has a constant magnitude and rotates clockwise at the
angular velocity . Switching the currents in two stator phases reverses the
direction of rotation in an AC machine.
ELEN 3441 Fundamentals of Power Engineering Spring 2008
 15

Magnetomotive force and flux

distribution on an AC machine
In the previous discussion, we assumed that the flux produced by a stator inside
an AC machine behaves the same way it does in a vacuum. However, in real
machines, there is a ferromagnetic rotor in the center with a small gap between a
rotor and a stator.

A rotor can be cylindrical

(such machines are said to
have non-salient poles), or
it may have pole faces
projecting out from it
(salient poles). We will
restrict our discussion to
non-salient pole machines
only (cylindrical rotors).

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 16

Magnetomotive force and flux

distribution on an AC machine
The reluctance of the air gap is much higher than
the reluctance of either the rotor or the stator;
therefore, the flux density vector B takes the
shortest path across the air gap: it will be
perpendicular to both surfaces of rotor and stator.
To produce a sinusoidal voltage in this machine,
the magnitude of the flux density vector B must
vary sinusoidally along the surface of the air gap.
Therefore, the magnetic field intensity (and the
mmf) will vary sinusoidally along the air gap
surface.

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 17

Magnetomotive force and flux

distribution on an AC machine
One obvious way to achieve a sinusoidal variation
of mmf along the air gap surface would be to
distribute the turns of the winding that produces
the mmf in closely spaced slots along the air gap
surface and vary the number of conductors in
each slot sinusoidally, according to:
nc  Nc cos  (6.17.1)

where Nc is the number of conductors at the angle

of 00 and  is the angle along the surface. n0

Ideal mmf
However, in practice, only a finite number of slots
and integer numbers of conductors are possible.
As a result, real mmf will approximate the ideal
mmf if this approach is taken.

mmf resulting
from the winding

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 18

Induced voltage in AC machines

Just as a 3-phase set of currents in a stator can produce a

rotating magnetic field, a rotating magnetic field can
produce a 3-phase set of voltages in the coils of a stator.

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 19

The induced voltage in a single

coil on a two-pole stator
Assume that a rotor with a sinusoidally distributed
magnetic field rotates in the center of a stationary coil.
We further assume that the magnitude of the flux density B
in the air gap between the rotor and the stator varies stator
sinusoidally with mechanical angle, while its direction is coil
always radially outward.
Note, that this is an ideal flux
distribution.
The magnitude of the flux
density vector at a point
around the rotor is

B  BM cos  (6.19.1)

Where  is the angle from the

Flux density in a gap
direction of peak flux intensity.
ELEN 3441 Fundamentals of Power Engineering Spring 2008
 20

The induced voltage in a single

coil on a two-pole stator
Since the rotor is rotating within the stator at an angular velocity m, the
magnitude of the flux density vector at any angle  around the stator is

B  BM cos t    (6.20.1)

The voltage induced in a wire is

eind   v  B   l (6.20.2)

Here v is the velocity of the wire relative to the magnetic field

B is the magnetic flux density vector
l is the length of conductor in the magnetic field
However, this equation was derived for a moving wire in a stationary magnetic
field. In our situation, the wire is stationary and the magnetic field rotates.
Therefore, the equation needs to be modified: we need to change reference such
way that the field appears as stationary.

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 21

The induced voltage in a single

coil on a two-pole stator
The total voltage induced in the coil is a sum of the voltages induced in each of its
four sides. These voltages are:
1. Segment ab:  = 1800; assuming that B is radially outward from the rotor, the
angle between v and B is 900, so
eba   v  B   I  vBM l cos mt 180 (6.21.1)

2. Segment bc: the voltage will be zero since the vectors (v x B) and l are
perpendicular.
ecb   v  B   I  0 (6.21.2)

3. Segment cd:  = 00; assuming that B is radially outward from the rotor, the
angle between v and B is 900, so
edc   v  B   I  vBM l cos mt  (6.21.3)

4. Segment da: the voltage will be zero since the vectors (v x B) and l are
perpendicular.
ead   v  B   I  0 (6.21.4)

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 22

The induced voltage in a single

coil on a two-pole stator
Therefore, the total voltage on the coil is:

eind  eba  edc  vBM l cos(mt  180)  vBM l cos mt

cos    cos    2vBM l cos mt (6.22.1)

Since the velocity of the end conductor is v  rm (6.22.2)

Then: eind  2rlBM m cos mt (6.22.3)

The flux passing through a coil is   2rlBM (6.22.4)

Therefore: eind  m cos mt (6.22.5)

Finally, if the stator coil has NC turns of wire, the total induced voltage in the coil:

eind  NCm cos mt (6.22.6)

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 23

The induced voltage in a 3-phase

set of coils
In three coils, each of NC turns, placed around the rotor magnetic field, the
induced in each coil will have the same magnitude and phases differing by 1200:

eaa ' (t )  N Cm cos mt

ebb ' (t )  N Cm cos mt  120  (6.23.1)

ecc ' (t )  N Cm cos mt  240 

A 3-phase set of currents can generate

a uniform rotating magnetic field in a
machine stator, and a uniform rotating
magnetic field can generate a 3-phase
set of voltages in such stator.

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 24

The rms voltage in a 3-phase stator

The peak voltage in any phase of a 3-phase stator is:

Emax  NCm (6.24.1)

For a 2-pole stator: m  e    2 f (6.24.2)

Thus: Emax  2 NC f (6.24.3)

The rms voltage in any phase of a 2-pole 3-phase stator is:

2
EA  NC f  2 NC f (6.24.4)
2
The rms voltage at the terminals will depend on the type of stator connection: if
the stator is Y-connected, the terminal voltage will be 3EA . For the delta
connection, it will be just EA.

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 25

Induced voltage: Example

Example 6.1: The peak flux density of the rotor magnetic field in a simple 2-pole
3-phase generator is 0.2 T; the mechanical speed of rotation is 3600 rpm; the
stator diameter is 0.5 m; the length of its coil is 0.3 m and each coil consists of 15
turns of wire. The machine is Y-connected.
a) What are the 3-phase voltages of the generator as a function of time?
b) What is the rms phase voltage of the generator?
c) What is the rms terminal voltage of the generator?

The flux in this machine is given by

  2rlB  dlB  0.5  0.3  0.2  0.03Wb
The rotor speed is
3600  2 rad
  377
60 s

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 26

Induced voltage: Example

a) The magnitude of the peak phase voltage is

Emax  NC  15  0.03  377  169.7V
and the three phase voltages are:
eaa ' (t )  169.7sin  377t 
ebb ' (t )  169.7sin  377t  120 
ecc ' (t )  169.7sin  377t  240 
b) The rms voltage of the generator is
Emax 169.7
EA    120V
2 2
c) For a Y-connected generator, its terminal voltage is

VT  3 120  208V

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 27

Induced torque in an AC machine

In an AC machine under normal operating conditions two magnetic fields are

present: a field from the rotor and a field from the stator circuits. The interaction of
these magnetic fields produces the torque in the machine.
Assuming a sinusoidal stator flux distribution
peaking in the upward direction
BS ( )  BS sin  (6.27.1)

(where BS is the magnitude of the peak flux

density) and a single coil of wire mounted on
the rotor, the induced force on the first
conductor (on the right) is
F  i  l ×B   ilBS sin  (6.27.2)

The torque on this conductor is (counter-

clockwise)
 ind ,1  r × F  rilBS sin  (6.27.3)

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 28

Induced torque in an AC machine

The induced force on the second conductor (on the left) is

F  i  l ×B   ilBS sin  (6.28.1)

The torque on this conductor is (counter-clockwise)

 ind ,2  r × F  rilBS sin  (6.28.2)

Therefore, the torque on the rotor loop is

 ind  2rilBS sin  (6.28.3)

We may notice the following:

1. The current i flowing in the rotor coil produces its own magnetic field HR, whose
magnitude is proportional to the current and direction can be found via the RHR.
2. The angle between the peak of the stator flux density BS and the peak of the
magnetic field intensity HR is .

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 29

Induced torque in an AC machine

Furthermore,
  180   (6.29.1)

sin   sin 180     sin  (6.29.2)

Therefore, the torque on the loop is

 ind  KH R BS sin  (6.29.3)

Here K is a constant dependent on the

machine design. Therefore:

 ind  KH R  BS (6.29.4)

Since BR   H R (6.29.5)

 ind  kBR  BS (6.29.6)

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 30

Induced torque in an AC machine

As before, in (6.29.5) k = K/ is a constant dependent on the machine design.

The equation (6.29.5) can be applied to any AC machine, not just to simple one-
loop rotors. Since this equation is used for qualitative studies of torque, the
constant k is not important.
Assuming no saturation, the net magnetic field is a vector sum of rotor and stator
fields:
Bnet  BR  BS (6.30.1)

Combining the last equation with (6.29.5), we arrive at

 ind  kBR   Bnet  BR   k  BR  Bnet   k  BR  BR  (6.30.2)

Since the cross-product of any vector with itself is zero:

 ind  kBR  Bnet (6.30.3)

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 31

Induced torque in an AC machine

Assuming that the angle between the rotor BR and stator BS magnetic fields is :

 ind  kBR Bnet sin  (6.31.1)

Assume that the rotor of the AC machine is

rotating counter-clockwise and the
configuration of magnetic fields is shown.
The combination of (6.30.3) and the RHR
shows that the torque will be clockwise, i.e.
opposite to the direction of rotation of the
rotor. Therefore, this machine must be acting
as a generator.

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 32

Winding insulation in AC machines

Winding insulation is of critical importance. If insulation of a

motor or generator breaks down, the machine shorts out and
the repair is expensive and sometimes even impossible.
Most insulation failures are due to overheating.
To limit windings temperature, the maximum power that can
be supplied by the machine must be limited in addition to the
proper ventilation.
ROT: the life expectancy of a motor with a given type of
insulation is halved for each 100C rise above the rated
winding temperature.

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 33

AC machine power flows and losses

The efficiency of an AC machine is defined as

Pout
 100% (6.33.1)
Pin

Since the difference between the input and output powers of a machine is due
to the losses occurring inside it, the efficiency is

Pin  Ploss
 100% (6.33.2)

Pin

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 34

AC machine power losses

Losses occurring in an AC machine can be divided into four categories:

1. Electrical or Copper losses

These losses are resistive heating losses that occur in the stator (armature)
winding and in the rotor (field) winding of the machine. For a 3-phase machine, the
stator copper losses and synchronous rotor copper losses are:

PSCL  3I A2 RA (6.34.1)

PRCL  3I F2 RF (6.34.2)

Where IA and IF are currents flowing in each armature phase and in the field
winding respectively. RA and RF are resistances of each armature phase and of
the field winding respectively. These resistances are usually measured at normal
operating temperature.

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 35

AC machine power losses

2. Core losses
These losses are the hysteresis losses and eddy current losses. They vary as B2
(flux density) and as n1.5 (speed of rotation of the magnetic field).

3. Mechanical losses
There are two types of mechanical losses: friction (friction of the bearings) and
windage (friction between the moving parts of the machine and the air inside the
casing). These losses are often lumped together and called the no-load rotational
loss of the machine. They vary as the cube of rotation speed n3.

4. Stray (miscellaneous) losses

These are the losses that cannot be classified in any of the previous categories.
They are usually due to inaccuracies in modeling. For many machines, stray
losses are assumed as 1% of full load.

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 36

The power-flow diagram

On of the most convenient technique to account for power

losses in a machine is the power-flow diagram.
AC generator:

The mechanical power is input,

and then all losses but cupper
are subtracted. The remaining
power Pconv is ideally converted
to electricity:
Pconv   ind m (6.36.1)

AC motor:
Power-flow diagram is simply
reversed.

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 37

Voltage regulation

Voltage regulation (VR) is a commonly used figure of merit for generators:

Vnl  V fl
VR  100% (6.37.1)
V fl

Here Vnl and Vfl are the no-load full-load terminal voltages of the
generator. VR is a rough measure of the generator’s voltage-current
characteristic. A small VR (desirable) implies that the generator’s output
voltage is more constant for various loads.

ELEN 3441 Fundamentals of Power Engineering Spring 2008

 38

Speed regulation

Speed regulation (SR) is a commonly used figure of merit for motors:

nnl  n fl
SR  100% (6.38.1)
n fl

nl   fl
SR  100% (6.38.2)
 fl
Here nnl and nfl are the no-load full-load speeds of the motor. SR is a
rough measure of the motor’s torque-speed characteristic. A positive SR
implies that a motor’s speed drops with increasing load. The magnitude of
SR reflects a steepness of the motor’s speed-torque curve.

ELEN 3441 Fundamentals of Power Engineering Spring 2008