1

PEDAL POWERED
WASHING MACHINE
GUIDED BY: MR.SUDHEESH K. (ASST.PROFESSOR)

MEMBERS: DAISE THANKACHAN(CIM17ME022)

HAILIN K BENNET(CIM17ME027)
BIBIN JAMES JOSEPH(CIM17ME020)
CLASS : S5 ME
GROUP NO : 10
 2
CONTENTS
 INTRODUCTION
 OBJECTIVE OF THE PRODUCT
 PROPOSED INNOVATION IN THE PRODUCT
 LITERATURE REVIEW
 METHODOLOGY
 WORKING, FLOWCHART, DIAGRAM
 COMPONENTS & SPECIFICATIONS
 PROJECT PROGRESS
 CONCLUSION & FUTURE SCOPE
 REFERENCE
INTRODUCTION ABOUT THE 3

PRODUCT
 The best option for rural areas and also urban areas for reducing
work load in washing clothes.
 In India, the rural areas are suffered from electricity shortage and
hence electric washing machines are not preferable to solve this
problem a pedal powered washing machine is invented.
 There is no need of electricity, diesel and petrol, only man power
is needed.
 The weight of the project is very less.
 It only needs less amount of money (Cost effective).
 4
OBJECTIVE OF THE PRODUCT

 Pedal powered washing machine can be used in the places

where electricity is not available.
 The system is also useful for the work out purpose because
pedaling will act as a health exercise.
 Pedeling required for running the washing machine will not
be a difficult task considering the overall health human
beings.
 PROPOSED INNOVATION IN THE 5

PRODUCT

 USE OF MORE COMFORTABLE SEAT : For making perfect pedaling, more

comfortable seat & back rest is provided. Use of back rest will be more
convenient for all.
 INCREASE WASHING CHAMBER CAPACITY: The capacity of washing can be
increased so that more clothes can be washed, thus utilizing the wasted
energy.
 ENERGY CAN BE STORED: By using of generator, small amount of DC energy
can be stored in a battery for further uses and also simultaneously charge
mobile phones.
 LITERATURE REVIEW 6

Author’s Name Title Name of the Year of Publication Findings

Journal & Details
Rakesh S. Pedal Operated International February 2016, Pedaling with legs
Ambade Multi Purpose Journal of Volume 4, Issue 2, is more effective
Machine for Engineering ISSN 2349-4476 than hand
Domestic Use Technology, cranking. From this
Management and we have opted for
Applied Sciences pedaling as best
(IJETMAS) source of energy.
M. Sandheep Design and International June 2017, Volume Design inspirations
Fabrication of Journal of 8, Issue 6, pp.631- for developing
Multipurpose Mechanical 640, ISSN Print: 0976- pedal powered
pedel powered Engineering and 6340 and ISSN machines.
Machine Technology Online: 0976-6549
(IJMET)
 7

Author’s Name Title Name of the Year of Publication Findings

Journal & Details
Krishnamurthy M, Pedal Operated International May – 2017, Design for the
Rakshith K K, Washing Machine Journal of Latest Volume– 02, Issue – Pedal Powered
R Harshaa, Engineering 05, Washing Machine
Rakesh N Research and PP – 60-66,
Applications ISSN: 2455-7137
(IJLERA)
Pratik Dhage, Generating International Aug -2017, For tapping
Amit Gavhad Electric Power by Research Journal Volume: 4, Issue:8, Electric Power
Pedal Driven of Engineering e-ISSN: 2395-0056, from Pedal
System and Technology p-ISSN: 2395-0072 Powered
(IRJET) Machines
 8
METHODOLOGY

Problem Design
Solution
Identification Initialisation
(26.8.2019) (2.9.2019) (16.9.2019)

CAD Model CAD Model Design

Simulation Preparation Calculations
(18.10.2019) (10.10.2019) (4.10.2019)

Final Report Final Software used for creating

Presentation Presentation CAD Model : FreeCad
(20.10.2019) (23.10.2019)
 9
WORKING

 It is based on very simple concept. The basic idea is to use a stationary

bicycle frame as the power source and use an assembly of chain and
sprocket to connect it to a washing tub.
 This machine has pedals which are connected with pedal crank. When
we pedal, the motion is tranfered from the pedal crank to drum via
chain and sprocket mechanism and uses bevel gears for converting
horizontal rotational motion to vertical rotational motion.
 The Drum revolves with clothes and detergent; it started to work like any
other electric washing machine.
 10
FLOWCHART

BEVEL
WATER DRUM GEAR
BEARING CYCLE
(Waste water Discharge)

WATER PEDAL
(Freash water as Input)

FORCE
 11
DIAGRAM
 12
COMPONENTS &
SPECIFICATIONS
 Seat:
-Length:5 inch( 12.7 cm)
-Width:7 inch( 17.78 cm)
 Pedal arrangement:
-Crankset&Pedal:Teeth-44, Diameter-130mm,Arm length-170mm,Pedal size-9.5×9.5×2.5
&
Free wheel:Teeth-18
 Chain:
-Size-1/2 inch(12.7mm) pitch,Chain length-700mm,Chain links-46
 Bevel Gear:
-No.of teeth of driver- 100, Diameter-50mm
-No. of teeth of driven-22, Diameter-30mm
 13
COMPONENTS & SPECIFICATION

 Bearing:
-Ball Bearing,Inner diameter-30.5mm,Outer diameter-65mm
 Shaft:
- Diameter-30mm, Distance b/w shaft& cycle-70 cm
 Washing Chamber:
- Minimum-3 kg
- Maximum-12 Kg
-Water usage-15 L /1 kg
 14
PROJECT PROGRESS

 The auto cad 3D model has been completed .

 Simulation of the CAD Model has been done.
 The final report has been prepared.
 The Final Presentation on 23rd October 2019.
 15
CONCLUSION & FUTURE SCOPE
 This Washing machine is inexpensive , is easy to build and will be adapted into
community.The machine will only contain parts that are readily available in
both rural and urban areas alike.
 We have achieved our goal to build a manually driven pedal powered low
cost washing machine using locally available materials and performing
necessary functions of washing with ease.
 It doesn’t need electricity.The washing machine can be used by the urban
people also while workout and exercise.
 If the production of this washing machine is done at a commercial scale then
the total production cost of the machine can be reduced to 40% of
estimated cost.
 16
REFERENCES

 R.S khurmi “Design of Machine Elements”,Eurasnia publishing

house 3 Pvt.Ltd, 14th revised edition.
 S.M Moghe & K.S Zakiuddin (2013) “Design and Development of
Turmeric Polishing Machine Energized by Human Power Flying
Motor”. A past review, proceedings of the 1st international and 16th
National.
 Bicilavadora:The pedal powered Washing Machine- IDEAS 2005
Proposal.
 17

THANK YOU