Lidar For Atmospheric Remote Sensing: Presented by A S Suchithra ID:195025005 M Tech-Gi K L University
Lidar For Atmospheric Remote Sensing: Presented by A S Suchithra ID:195025005 M Tech-Gi K L University
presented by
A S SUCHITHRA
ID:195025005
M TECH-GI
K L UNIVERSITY
Content
• Introduction
• Historical overview
• Lidar types
• Lidar equation
• Aerosols measurement
INTRODUCTION
Historical Overview
• 1936 first reported result s of density profile
• 1953 first retrieval of temperature profiles from
density profile
• Early 1960s invention of laser(powerful light source
to lidar system)
• 1962 fist use of laser in a lidar
• 1977 first ozone measurement by lidar
• Present network of ground based lidar system as
NDSC,EARLINET,etc. lidars on aircraft.space based
lidar(ALISSA,LITE,CALIPSO program)
Historical Overview(2)
Lidar Types
1.Surface elevation lidar:
Surface elevation lidars measure the laser pulse time-
of-flight and hence the distance from the spacecraft to
the surface and then solve for the surface elevation
with the knowledge of the spacecraft orbit position
with respect to the center of the mass of the Earth
2.Atmosphere Backscattering lidars:
Measure the attenuated backscatter as a function of
altitude
3.Laser spectral absorption lidar:
Atmosphere backscatter lidars
There are several types of atmosphere backscattering lidars,
depending on the laser wavelength selection and the
receiver configuration .
1.Elastic back scattering lidar
2.Raman lidar
4.Doppler lidar
5.Fluorescence lidar
Lidar equation
Consideration for lidar equation
• In general ,the interaction between light photons and
particles is a scattering process
[β( λ, λL,Ѳ,R)ΔR]
λL)G(R) ]+NB
3rd term: Receiving Probability: The probability that a
scatter photon is collected by the receiving telescope, i.e.,t
he solid angle subtended by the receiver aperture to
scatterer
.
𝑅 𝑅
[T(λL ,R)T(λ,R)]= exp [-(0 ∝ (λL ,r)dr]+0 ∝ ( λ, r)dr)]
When λL = λ
𝑅
= exp[ -2 0 ∝ ( λ, r)dr]
Extension coefficient ∝ :
.
2.Raman lidar
• Raman backscatter lidars are similar to Rayleigh and Mie
backscattering lidars but measure the return signals at the
Raman-shifted wavelength
• Raman lidar exploits inelastic scattering
• Raman lidars are more difficult to built in general because
the laser transmitter has to be at the exact wavelength and
the receiver has to be able to filter out the Raman-shifted
signal
• Used for measure the concentration of atmosphere gases
and used to retrieve aerosol parameters
3.Differential absorption lidar(DIAL):
.