Scribd
Upload
353 views3 pages

Fabrication of A Drone: A Major Project Report On

This document is a major project report on the fabrication of a drone. It describes building and modifying an Aeroquad quadcopter kit to achieve stable autonomous flight, GPS data gathering and storage, and auto-landing. The kit included a frame, motors, electronic speed controllers, an Arduino Mega board, and sensor boards. Additional components like batteries, a transmitter, receiver, GPS module, and microSD card adapter were interfaced. The Aeroquad software was modified to interface components. Individual tests verified proper functioning. PID tuning achieved stabilization on each axis. Currently the quadcopter can stabilize, determine GPS, store and log data, achieving most project goals in a stable and maneuverable drone.

Uploaded by

Azam Emaad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
353 views3 pages

Fabrication of A Drone: A Major Project Report On

This document is a major project report on the fabrication of a drone. It describes building and modifying an Aeroquad quadcopter kit to achieve stable autonomous flight, GPS data gathering and storage, and auto-landing. The kit included a frame, motors, electronic speed controllers, an Arduino Mega board, and sensor boards. Additional components like batteries, a transmitter, receiver, GPS module, and microSD card adapter were interfaced. The Aeroquad software was modified to interface components. Individual tests verified proper functioning. PID tuning achieved stabilization on each axis. Currently the quadcopter can stabilize, determine GPS, store and log data, achieving most project goals in a stable and maneuverable drone.

Uploaded by

Azam Emaad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 3

A

Major Project Report on

Fabrication of a Drone

Submitted to

RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA


BHOPAL (M.P.)
In Partial fulfillment for the award of degree of

BACHELOR OF ENGINEERING
IN
MECHANICAL ENGINEERING
By
Ashwani Dixit, 0714CS111017
Ayush Awasthi, 0714ME111024
Vaseem Akram, 0714ME111010
Hemant kumar sharma, 0714ME111046
Deependra Ranawat, 0714ME111040
Manoj kelkar, 0714ME111065
Under the Guidance of
Prof. Bharat Chede
Head of Department

MAHAKAL INSTITUTE OF TECHNOLOGY & MANAGEMENT, UJJAIN


ABSTRACT

A quadcopter can achieve vertical flight in a stable manner and be used to monitor or
collect data in a specific region such as Loading a mass. Technological advances have
reduced the cost and increase the performance of the low power microcontrollers that
allowed the general public to develop their own quadcopter. The goal of this project is to
build, modify, and improve an existing quadcopter kit to obtain stable flight, gather and
store GPS data, and perform autocommands, such as auto-landing. The project used an
Aeroquad quadcopter kit that included a frame, motors, electronic speed controllers,
Arduino Mega development board, and sensor boards and used with the provided
Aeroquad software. Batteries, a transmitter, a receiver, a GPS module, and a micro SD
card adaptor were interfaced with the kit. The aeroquad software was modified to properly
interface the components with the quadcopter kit. Individual components were tested and
verified to work properly. Calibration and tuning of the PID controller was done to obtain
proper stabilization on each axis using custom PID test benches. Currently, the
quadcopter can properly stabilize itself, determine its GPS location, and store and log
data. Most of the goals in this project have been achieved, resulting in a stable and
maneuverable quadcopter.

KEYWORDS Drone/Quadcopter, Transmitter & Remote, Propellers, Electric Motors, Battery


Thank you for using www.freepdfconvert.com service!

Only two pages are converted. Please Sign Up to convert all pages.

https://www.freepdfconvert.com/membership

You might also like