Scribd
Upload
106 views

2 Units of Measurement

The document discusses different systems of units of measurement. It describes fundamental and derived units, and focuses on the International System of Units (SI units) which has seven fundamental units including the metre, kilogram, second, ampere, kelvin, mole and candela. It also lists two supplementary units and provides rules for writing SI units, such as using a space to separate digits in numbers with five or more digits and using a dash to multiply units.

Uploaded by

Richmond Alcala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
106 views

2 Units of Measurement

The document discusses different systems of units of measurement. It describes fundamental and derived units, and focuses on the International System of Units (SI units) which has seven fundamental units including the metre, kilogram, second, ampere, kelvin, mole and candela. It also lists two supplementary units and provides rules for writing SI units, such as using a space to separate digits in numbers with five or more digits and using a dash to multiply units.

Uploaded by

Richmond Alcala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 12

units of measurements

Fundamental Units
• The measurement of physical quantities is one of the
most important operations in engineering.
• Every quantity is measured in terms of some arbitrary, but
internationally accepted units, called fundamental units.
units of measurements

 Derived Units
Some units are expressed in terms of other units, which are derived
from fundamental units, are known as derived units e.g. the unit of
area, velocity, acceleration, pressure, etc.
 System of Units
There are only four systems of units, which are commonly used and
universally recognised.
These are known as :
1. C.G.S. units, 2. F.P.S. units,
3. M.K.S. units, and 4. S.I. units.
Since the present course of studies are conducted in S.I. system of units,
therefore, we shall discuss this system of unit only.
units of measurements

 S.I. Units (International System of Units)


The 11th General Conference* of Weights and Measures
have recommended a unified and systematically constituted
system of fundamental and derived units for international
use. This system is now being used in many countries.

 In this system of units, there are seven fundamental


units and two supplementary units
units of measurements
units of measurements
units of measurements

 Presentation of Units and their Values


The frequent changes in the present day life are facilitated by an
international body known as International Standard Organisation
(ISO) which makes recommendations regarding international
standard procedures. The implementation of lSO recommendations,
in a country, is assisted by its organisation appointed for the
purpose.
 Although the metre is the unit of length, yet a smaller length of
one-thousandth of a metre proves to be more convenient unit,
especially in the dimensioning of drawings. Such convenient units
are formed by using a prefix in the basic units to indicate the
multiplier. The full list of these prefixes is given in the following
units of measurements
units of measurements
 Rules for S.I. Units
The eleventh General Conference of Weights and Measures recommended only the fundamental
and derived units of S.I. units. But it did not elaborate the rules for the usage of the units. Later on
many scientists and engineers held a number of meetings for the style and usage of S.I. units.
Some of the decisions of the meeting are :
1. For numbers having five or more digits, the digits should be placed in groups of three separated
by spaces (instead of commas)** counting both to the left and right of the decimal point.
2. In a four*** digit number, the space is not required unless the four digit number is used in a
column of numbers with five or more digits.
3. A dash is to be used to separate units that are multiplied together. For example, newton × metre
is written as N-m. It should not be confused with mN, which stands for milli newton.
4. Plurals are never used with symbols. For example, metre or metres are written as m.
5. All symbols are written in small letters except the symbol derived from the proper names. For
example, N for newton and W for watt.
6. The units with names of the scientists should not start with capital letter when written in full. For
example, 90 newton and not 90 Newton.
units of measurements
units of measurements
units of measurements
units of measurements

END

THANK YOU

You might also like