ICT9:

Computer HardwareServicing
Module 3, Lesson 2: Install Equipment/ Devices and Systems
SAFETY PRECAUTIONS
 This lesson is designed to give you the
proper procedures used in installing
devices and operating system of a personal
computer, alongside with it is the basic
Module 3,Lesson 2: computer configuration set up. At the end
InstallEquipment/Devices of this lesson you should be able to:
andSystems
a) Apply OHS procedures in installing
SAFETYPRECAUTIONS devices, systems, networking devices,
and peripherals;
b) Comply with the requirements in
installing devices,/systems, networking
devices, and peripherals;
 This lesson is designed to give you the
proper procedures used in installing
devices and operating system of a personal
computer, alongside with it is the basic
Module 3,Lesson 2: computer configuration set up. At the end
InstallEquipment/Devices of this lesson you should be able to:
andSystems
c) Install computer systems, networking
SAFETYPRECAUTIONS devices and peripherals in accordance
with job requirements;
d) Perform variations in installing devices
and systems in accordance with
customer/client’s requirements;
 This lesson is designed to give you the
proper procedures used in installing
devices and operating system of a personal
computer, alongside with it is the basic
Module 3,Lesson 2: computer configuration set up. At the end
InstallEquipment/Devices of this lesson you should be able to:
andSystems
e) Obtain approval from appropriate
SAFETYPRECAUTIONS personnel before implementing
contingency procedures;

f) Respond to unplanned events or

conditions in accordance to established
procedures; and
 This lesson is designed to give you the
proper procedures used in installing
devices and operating system of a personal
computer, alongside with it is the basic
Module 3,Lesson 2: computer configuration set up. At the end
InstallEquipment/Devices of this lesson you should be able to:
andSystems
g) Check the quality of the work
SAFETYPRECAUTIONS undertaken in accordance with the
established procedures.
 Personal Protective Equipment
 refers to protective clothing, helmets,
goggles, or other gear designed to protect
the wearer's body or clothing from injury
Module 3,Lesson 2: by electrical hazards, heat, chemicals,
InstallEquipment/Devices
andSystems and infection, for job-related occupational
safety and health purposes.
SAFETYPRECAUTIONS
 Personal Protective Equipment
 P P E can also be used to protect the
working environment from pesticide
application, pollution or infection from
Module 3,Lesson 2: the worker (for example in a microchip
InstallEquipment/Devices
andSystems factory).

SAFETYPRECAUTIONS  It is important t h a t students and

teachers during their laboratory period
should be required to use personal
protective equipment.
 Personal Protective Equipment
 Some of these are:
 Goggles
A large spectacles, with shields around the rims,
Module 3,Lesson 2: for protecting the eyes from dust, excessive light,
InstallEquipment/Devices wind, etc.
andSystems

SAFETYPRECAUTIONS
 Personal Protective Equipment
 Some of these are:
 Rubber Sole Shoes
A special type of shoes used to prevent electrical
Module 3,Lesson 2: shock a nd for waterproofing a nd insulating
InstallEquipment/Devices purposes.
andSystems

SAFETYPRECAUTIONS
 Personal Protective Equipment
 Some of these are:
 Apron
A garment worn over the front of the body
Module 3,Lesson 2: as a protection for one’s cloth.
InstallEquipment/Devices
andSystems

SAFETYPRECAUTIONS
 Personal Protective Equipment
 Some of these are:
 Face Mask
A covering for the face to prevent the inhaling or
Module 3,Lesson 2: absorbing dust a nd other chemicals
InstallEquipment/Devices
andSystems

SAFETYPRECAUTIONS
 Personal Protective Equipment
 Some of these are:
 Gloves
The covering material with a separate sheath for
Module 3,Lesson 2: each finger used for ha nd protection.
InstallEquipment/Devices
andSystems

SAFETYPRECAUTIONS
 Anti-Static and Safety Precautions
 Static electricity is the discharge of
electricity between two objects with
different electrical potential.
Module 3,Lesson 2:
InstallEquipment/Devices  H u ma n s can't feel a static shock until it
andSystems is several thousand volts strong, but it
SAFETYPRECAUTIONS takes less t h a n 30 volts to fry a sensitive
computer component, such as a stick of
RAM or a processor.
 Anti-Static and Safety Precautions
 That's why computer technicians and
home computer builders have to guard
their computers against the deadly
Module 3,Lesson 2: ravages of static electricity, as well as
InstallEquipment/Devices
andSystems take steps to avoid injury.

SAFETYPRECAUTIONS
 Anti-Static and Safety Precautions
Safety and Anti-Static Rules
 Always use a n anti-static wrist strap
when working on a computer (except
Module 3,Lesson 2:
InstallEquipment/Devices when working on monitors)
andSystems
 Always disconnect a computer from the
SAFETYPRECAUTIONS AC power and from any powered
peripherals while you are working on it.
 Anti-Static and Safety Precautions
Safety and Anti-Static Rules
 Always grasp a metal par t of the
computer chassis with your bare hand
Module 3,Lesson 2:
InstallEquipment/Devices before you touch anything inside. Do this
andSystems even if you are wearing a n anti-static
SAFETYPRECAUTIONS wristband.
 Anti-Static and Safety Precautions
Safety and Anti-Static Rules
 Always handle electronic components by
a non-conducting (non-metallic) edge.
Module 3,Lesson 2:
InstallEquipment/Devices Don't touch the pins or other connectors.
andSystems
 Never plug a n ATX power supply into AC
SAFETYPRECAUTIONS power unless it is connected either to a
computer's motherboard or to a dummy
test load.
 Anti-Static and Safety Precautions
Safety and Anti-Static Rules
 Always use a UL-approved surge
protector or a n Uninterruptible Power
Module 3,Lesson 2:
InstallEquipment/Devices Supply t h a t incorporates surge and spike
andSystems protection.
SAFETYPRECAUTIONS  Never eat, drink, or smoke while working
on a computer.
Module 3,Lesson 2:
InstallEquipment/Devices
andSystems
QUIZ
SAFETYPRECAUTIONS
 QUIZ
True or False
Direction: Write TRUE if the statement is
correct and FALSE otherwise.
Module 3,Lesson 2:
InstallEquipment/Devices
andSystems
1. Always disconnect a computer from the
SAFETYPRECAUTIONS AC power and from any powered
peripherals while you are working on it.
 QUIZ
True or False
Direction: Write TRUE if the statement is
correct and FALSE otherwise.
Module 3,Lesson 2:
InstallEquipment/Devices
andSystems
2. Always grasp a metal par t of the
SAFETYPRECAUTIONS computer chassis with your bare hand
before you touch anything inside. Do
this even if you are wearing a n anti-
static wristband.
 QUIZ
True or False
Direction: Write TRUE if the statement is
correct and FALSE otherwise.
Module 3,Lesson 2:
InstallEquipment/Devices
andSystems
3. Always handle electronic components by
SAFETYPRECAUTIONS a non-conducting (non-metallic) edge.
Don't touch the pins or other connectors.
 QUIZ
True or False
Direction: Write TRUE if the statement is
correct and FALSE otherwise.
Module 3,Lesson 2:
InstallEquipment/Devices
andSystems
4. Always use a UL-approved surge
SAFETYPRECAUTIONS protector or a n Uninterruptible Power
Supply t h a t incorporates surge and
spike protection.
 QUIZ
True or False
Direction: Write TRUE if the statement is
correct and FALSE otherwise.
Module 3,Lesson 2:
InstallEquipment/Devices
andSystems
5. Never use a n anti-static wrist strap
SAFETYPRECAUTIONS when working on a computer (except
when working on monitors
 QUIZ
True or False
Direction: Write TRUE if the statement is
correct and FALSE otherwise.
Module 3,Lesson 2:
InstallEquipment/Devices
andSystems
6. Everyone is allowed to eat, drink, or
SAFETYPRECAUTIONS smoke while working on a computer.
 QUIZ
True or False
Direction: Write TRUE if the statement is
correct and FALSE otherwise.
Module 3,Lesson 2:
InstallEquipment/Devices
andSystems
7. Never plug a n ATX power supply into
SAFETYPRECAUTIONS AC power unless it is connected either to
a computer's motherboard or to a
dummy test load.
 QUIZ
True or False
Direction: Write TRUE if the statement is
correct and FALSE otherwise.
Module 3,Lesson 2:
InstallEquipment/Devices
andSystems
8. Static electricity is the discharge of
SAFETYPRECAUTIONS electricity between two objects with
different electrical potential.
 QUIZ
True or False
Direction: Write TRUE if the statement is
correct and FALSE otherwise.
Module 3,Lesson 2:
InstallEquipment/Devices
andSystems
9. Apron is a garment worn over the front
SAFETYPRECAUTIONS of the body as a protection for one’s
cloth.
 QUIZ
True or False
Direction: Write TRUE if the statement is
correct and FALSE otherwise.
Module 3,Lesson 2:
InstallEquipment/Devices
andSystems
10. P P E can also be used to protect the
SAFETYPRECAUTIONS working environment from pesticide
application, pollution or infection from
the worker.
Module 3,Lesson 2:
InstallEquipment/Devices
andSystems
ACTIVITY
SAFETYPRECAUTIONS
 ACTIVITY
Directions:
The class will be divided into five (5)
groups.
Module 3,Lesson 2:
InstallEquipment/Devices Each group has its own respective leader.
andSystems
The group will perform a task regarding
SAFETYPRECAUTIONS familiarizing the personal protective
equipment.
 ACTIVITY

Module 3,Lesson 2:
InstallEquipment/Devices
andSystems

SAFETYPRECAUTIONS
 End of
Module 3, Lesson 2:
Module 3,Lesson 2:
InstallEquipment/Devices Install Equipment/ Devices
andSystems and Systems
SAFETYPRECAUTIONS
SAFETY PRECAUTIONS