Scribd
Upload
88 views

Condition Monitoring Technique NDT

This document provides an overview of ultrasonic testing as a condition monitoring technique for non-destructive testing (NDT). It discusses the basic principles of ultrasonic testing, including how ultrasound is generated and detected using transducers. The document describes various ultrasonic testing techniques like pulse-echo and angle beam testing. It also covers data presentation using A-scans and discusses the advantages, limitations, and applications of ultrasonic testing. The key benefits highlighted are its sensitivity to surface and subsurface flaws with high accuracy, and its ability to determine thickness and detect internal corrosion without damaging the part.

Uploaded by

Deepak Chandra Pandey
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
88 views

Condition Monitoring Technique NDT

This document provides an overview of ultrasonic testing as a condition monitoring technique for non-destructive testing (NDT). It discusses the basic principles of ultrasonic testing, including how ultrasound is generated and detected using transducers. The document describes various ultrasonic testing techniques like pulse-echo and angle beam testing. It also covers data presentation using A-scans and discusses the advantages, limitations, and applications of ultrasonic testing. The key benefits highlighted are its sensitivity to surface and subsurface flaws with high accuracy, and its ability to determine thickness and detect internal corrosion without damaging the part.

Uploaded by

Deepak Chandra Pandey
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 20

CONDITION MONITORING TECHNIQUE

NDT: ULTRASONIC TESTING

Presented to- Presented by-


Dr. Balbir singh Deepak pandey
Associate professor 18mma009
SOME (M&A)
CONTENTS
 Introduction –CBM
 Types of CM

 Importance of NDT

 Ultrasonic testing

 Basic principle –UT

 Various techniques-UT

 Data representation A-scan

 Advantage

 Limitation

 Application

 Conclusion
INTRODUCTION -CBM
 Condition monitoring (CM) is a process of
monitoring a parameter of condition in machinery
eg . Vibration ,temperature etc
 In order to identify a significant change which is
indicative of developing a fault .
 Condition monitoring is a process which is used to
monitor the condition of the machine which
ultimately reduces the time required to identify
and rectify the fault which further increases the
efficiency of the machine. •
 Condition monitoring provides us the real time
information about the condition of the machine
which gives us the ability to minimize or to
eliminate the factor responsible of faults.
TYPES OF CONDITION
MONITORING:

Vibration condition monitoring


• Lubricant analysis
• Acoustic emission
• Infrared thermography
• Ultrasinic testing
Importance of NDT
 NDT increases the safety and reliability of the product during
operation.
It decreases the cost of the product by reducing scrap and
conserving materials, labor and energy.
 It enhances the reputation of the manufacturer as a producer
of quality goods. All of the above factors boost the sales of the
product which bring more economical benefits for the
manufacturer.
NDT is also used widely for routine or periodic determination
of quality of the plants and structures during service. This not
only increases the safety of operation but also eliminates any
forced shut down of the plants.
ULTRASONIC TESTING
 Ultrasonic system uses high frequency sound energy to
conduct examinations and make measurements.
 Ultrasonic examinations can be conducted on a wide
variety of material forms including castings, forgings, welds,
and composites.
 considerable amount of information about the part being
examined can be collected, such as the presence of
discontinuities, part or coating thickness .
ULTRASOUND GENERATION
Ultrasound is generated with a transducer.
A piezoelectric element in
the transducer converts
electrical energy into
mechanical vibrations
(sound), and vice versa.

The transducer is
capable of both
transmitting and
receiving sound
energy.
PRINCIPLES OF ULTRASONIC
INSPECTION
 Ultrasonic waves are introduced into a material where
they travel in a straight line and at a constant speed until
they encounter a surface.
 At surface interfaces some of the wave energy is reflected
and some is transmitted.
 The amount of reflected or transmitted energy can be
detected and provides information about the size of the
reflector.
 The travel time of the sound can be measured and this
provides information on the distance that the sound has
traveled.
TEST TECHNIQUES
 Ultrasonic testing is a very versatile inspection
method, and inspections can be accomplished in a
number of different ways.
Ultrasonic inspection techniques are commonly divided
into three primary classifications.
–Pulse-echo and Through Transmission (Relates to
whether reflected or transmitted energy is used)
–Normal Beam and Angle Beam (Relates to the angle
that the sound energy enters the test article)
–Contact and Immersion (Relates to the method of
coupling the transducer to the test article)
TEST TECHNIQUES - PULSE-ECHO
 In pulse-echo testing, a transducer sends out a pulse of
energy and the same or a second transducer listens for reflected
energy (an echo).
 Reflections occur due to the presence of discontinuities and
the surfaces of the test article . f
TEST TECHNIQUES – NORMAL AND ANGLE
BEAM

• In normal beam testing, the sound beam


is introduced into the test article at 90
degree to the surface.

• In angle beam testing, the sound beam


is introduced into the test article at some
angle other than 90.
TRANSDUCERS
• Transducers are manufactured in a variety of forms, shapes
and sizes for varying applications.
• Transducers are categorized in a number of ways which
include:
- Contact or immersion
- Single or dual element
- Normal or angle beam
• In selecting a transducer
for a given application, it
is important to choose the desired frequency, bandwidth, size.
DATA PRESENTATION - A-SCAN
 A-scan presentation displays
the amount of received ultrasonic
energy as a function of time.
 Relative discontinuity size can

Signal Amplitude
be estimated by comparing the
signal amplitude to that from a
known reflector.
 Reflector depth can be
determined by the position of the
signal on the horizontal sweep. Time
ADVANTAGE OF ULTRASONIC TESTING
Sensitive to both surface and subsurface discontinuities.
•Depth of penetration for flaw detection or measurement is
superior to other methods.
•Only single-sided access is needed when pulse-echo
technique is used.
•High accuracy in determining reflector position and
estimating size and shape.
•Minimal part preparation required.
•Electronic equipment provides instantaneous results.
•Detailed images can be produced with automated systems.
•Has other uses such as thickness measurements, in addition to
flaw detection.
LIMITATIONS OF ULTRASONIC TESTING
•Surface must be accessible to transmit ultrasound.
•Skill and training is more extensive than with some other
methods.
•Normally requires a coupling medium to promote transfer of
sound energy into test specimen.
•Materials that are rough, irregular in shape, very small,
exceptionally thin or not homogeneous are difficult to inspect.
•Cast iron and other coarse grained materials are difficult to
inspect due to low sound transmission and high signal noise.
•Linear defects oriented parallel to the sound beam may go
undetected.
•Reference standards are required for both equipment
calibration, and characterization of flaws.
APPLICATION

 Quality control and material inspection.


 Detection of failure of rail rolling stock axes, pressure vessels,
aircrafts section ,mill rolls etc.
 Measurement of metal section thickness.

 Inspect pipe and plate welds.

 Inspect pins, bolts, shafts for cracks.

 Detect internal corrosion.

 Structural health monitoring.


CONCLUSION
Condition monitoring used to monitor the condition of the
machine which ultimately reduces the time required to
identify and rectify the fault which further increases the
efficiency of the machine .
Ultrasonic testing of non destructive testing is very popular
now a days .Many developed countries are used this
technology because of its huge benefits.
Modern NDT methods will become just as an important tool
for risk based inspection approaches and maintenance
planning. For this purpose every industry should have a NDT
division with NDT personal.
THANK YOU

You might also like