Scribd
Upload
94 views

Chapter 1

Fluids are substances that continuously deform under shear stress, unlike solids. A fluid's properties like density, viscosity, compressibility, and speed of sound depend on factors like temperature and pressure. Surface tension is important for fluid behavior at interfaces. Key equations relate these fluid properties and dynamics.

Uploaded by

Kristina Ponce
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
94 views

Chapter 1

Fluids are substances that continuously deform under shear stress, unlike solids. A fluid's properties like density, viscosity, compressibility, and speed of sound depend on factors like temperature and pressure. Surface tension is important for fluid behavior at interfaces. Key equations relate these fluid properties and dynamics.

Uploaded by

Kristina Ponce
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 26

Chapter 1 – Fluid Properties

CE30460 - Fluid Mechanics


Diogo Bolster
What is a Fluid?
 A substance that deforms continuously when acted on by a shearing stress

 A solid will deform to a certain point for a given stress

 Liquids and Gases are fluids (water, oil, air)

 Some substances can act as solids and fluids (e.g. soil standing/ avalanche)
What happens for a fluid/solid ?
Units and Dimensions Important in Fluids
 Primary Dimensions
Sometimes
 Length (L)
 Time (T) Force/Time /Mass/Temperature
 Mass (M)
 Temperature (Q)

 For any relationship A=B


 Units (A)=Units (B) Dimensional Homogeneity
 Can this ever not be true?
Systems of Units
British SI (Systeme International)

Foot (ft) Meter (m)

Second (s) Second (s)

Pound (lbf) Kilogram (kg)


Slug (32.17 lbm)

Degree Rankine (oR) Degree Kelvin (oK)


related to Fahrenheit related to Celsius
(oF+459.67) (oC+273.15)
Why are Units so Important
Sample Problem 1 – Unit Homogeneity
 Consider the formula

F = K avt -1 + K b lt -1 + K c t -2
 F – force, v – velocity, t – time, l – length

 What are the unites of the Ka, Kb and Kc terms?


Fluid Mass and Weight
 Density r [M L-3]
 Varies with temperature and pressure
 Liquid (often negligible changes)
 Gasses (can be very important to account for changes)

 Specific Volume (inverse density) v [L3 M-1]

 Specific Weight g=r g [What are the units?]

 Specific gravity SG=r/rwater@4C (i.e. 1 for water at 4oC it equal to 1, for


mercury 13.55, where the density of mercury would be 13550 kg m-3).
Example 1 – Thunderstorm Fronts
Density Effects (called buoyancy) can be
very very important in Environmental Flows

https://www.youtube.com/watch?v=AfueW-cp_s8
How quickly do you think it moves – make an educated guess? What matters?
Deduce it from there
Density Effects – Saltwater Intrusion
Sample Problem – Density
 A volume of 1m^3 is occupied by two fluids. Fluid 1 has a specific gravity of
SG=2, while Fluid 2 has a density of 800 kgm-3? There is three times as
much mass of Fluid 2 as there is of Fluid 1.

 How much mass is there of each fluid?

 What volumetric fraction of the total volume does each fluid occupy?
Ideal Gases
 Gases are much more compressible than liquids and their density is sensitive to changes
in pressure and temperature. An ideal gas is one which follows the ideal gas law:
p
r=
RT
 R – the gas constant depends on the particular gas in question.

 https://ch301.cm.utexas.edu/simulations/js/idealgaslaw/

 Pressure is a relative measurements and two common used measures in engineering are :
Gauge vs. Absolute pressure (here we must use absolute)
 Absolute is relative to absolute zero pressure
 Gauge is measured relative to atmospheric (i.e. Absolute-Atmospheric)
Pressure
Sample Problems – Ideal Gases
 A lab is conducting experiments. The temperature is 27oC and the pressure
is 14 psi. What is the density of the air?

 Express you answers in both slugs/ft3 and kg/m3

 What happens if we conduct the same experiment at an altitude of 30000


feet. What are typical temperatures and pressures at that height. What will
the density of air be up there?
Viscosity
 Viscosity is a measure of a fluid’s resistance to shear – more viscous, more resistance

 Intrinsic property of a fluid (varies with temperature)

 Viscosity causes fluids to adhere to solid boundaries


https://www.youtube.com/watch?v=V5a4kP-5Jiw
du
 Observations show shear stress is proportional to velocity gradient tµ
dy
 (Dynamic) Viscosity (m) is the constant or proportionality s.t.
du
Kinematic Viscosity (n=m/r) is also commonly used in formulas.
t=m

dy
What’s more viscous: Water or Air??
Velocity profile of air over a car roof

Where is the region of maximum shear


stress?
Sample Problem – Shear Stress due to
viscosity
 You measure a velocity profile for water at 15.6oC in the lab that can be fit
with the polynomial
v(y) = -1.1y^3+12y^2 +13.2y 0 £ y £10

 Calculate an expression for the shear stress? Plot it.

 Where is it maximum? What is the value?

 Where is it minimum? What is the value?


Compressibility
 How much does the volume of a
fluid change for a given change in
pressure

 Bulk Modulus

 How is this different for gases and


fluids?
Compression of Gases
 Two common approaches are used

 Isothermal (constant temperature) so from ideal gas law


P
= const
r
 Isentropic (no change in entropy, frictionless with no exchange of heat to
surroundings)

P For many gases k ~ 1.4


= const
r k

See table B3 and B4 in text


Speed of Sound
 What is the speed of sound?

 https://www.youtube.com/watch?v
=OEmiTYtW5cs

 https://www.youtube.com/watch?v
=PQydRIxoAU0
Speed of Sound
 What is the speed of sound?
 A measure of how quickly small disturbances propagate

dp Ev
c= =
dr r

What does this mean for speed


of sound in a liquid relative to a
gas?
Sample Problem – Speed of Sound
in Water vs. Air
 Which do you think is greater?

 Calculate them…..
Surface Tension
 Surface tension is a property of fluid that is important at interfaces between
different fluids. The different molecular dynamics on each side of the
interface lead to surface tension

 How insects walk on water; how droplets form in a specific shape

 Sensitive to changes in chemical composition (i.e. you can change surface


tension easily by dissolving a solute in a fluid)

 For a capillary rise gpR2 h = 2pRs cos(q )


Capillary Rise
Sample Question – Walking on Water…
 A water strider is supported on the surface of a pond by surface tension
acting along the interface between the water and the bugs’ legs. Determine
the minimum length of the interface needed to support the bug

 Assume the bug weighs 10-4 N and that surface tension acts only vertically
upwards

 Repeat the calculation for an average human weighing 750N


Important Equations
 Specific Weight g=rg

 Ideal Gas Law p=rRT

 Newtonian Fluid Shear Stress t=m du/dy

 Bulk Modulus

Speed of Sound dp Ev
 c= =
dr r
 Capillary Rise in a Tube gpR2 h = 2pRs cos(q )

You might also like