Scribd
Upload
54 views17 pages

Mobile Phone Detector Updated

This document presents a mobile phone detector circuit designed by four students. It consists of an IC, transistor, antenna, piezo buzzer, and other components. The circuit can detect incoming and outgoing mobile phone calls from up to 1.5 meters away, even on silent mode. When a call is detected, the buzzer sounds and an LED blinks. The detector has applications in places where phone use is prohibited, like exam halls, hospitals, and prisons.

Uploaded by

Premdeep tamarala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
54 views17 pages

Mobile Phone Detector Updated

This document presents a mobile phone detector circuit designed by four students. It consists of an IC, transistor, antenna, piezo buzzer, and other components. The circuit can detect incoming and outgoing mobile phone calls from up to 1.5 meters away, even on silent mode. When a call is detected, the buzzer sounds and an LED blinks. The detector has applications in places where phone use is prohibited, like exam halls, hospitals, and prisons.

Uploaded by

Premdeep tamarala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 17

MOBILE PHONE DETECTOR

PRESENTED BY
D.PRABHUDHAR REDDY - 165T1A0409
CH.SAI KIRAN - 165T1A0407
K.VINAY KUMAR REDDY - 165T1A0418
T.PREMDEEP - 165T1A0436
OVERVIEW:
• OBJECTIVE
• ABSTRACT
• BLOCK DIAGRAM
• ELEMENTS USED IN MOBILE PHONE DETECTOR
• DESCRIPTION ABOUT THE ELEMENTS
• CIRCUIT DIAGRAM
• WORKING
• ADVANTAGES
• APPLICATIONS
• CONCLUSION
• FUTURE WORKS
OBJECTIVE:
• To sense the presence of an activated mobile phone around a certain area,
so that it can be used to prevent use of mobile phones in examination
halls, confidential rooms, etc.
• It is also useful for detecting the use of mobile phone for spying and un-
authorized video transmission.
• We are most familiar with cell phone active detectors.
ABSTRACT:
• This is a handy, pocket-size mobile transmission detector or sniffer.
• It works from a distance of one and half meters.
• The circuit can detect the in coming and outgoing calls, and SMS even if the
mobile phone is kept in the silent mode.
• The transmission frequency of mobile phone ranges from 0.9 to 3GHz with a
wave length of 3.3 to 10cm.
BLOCK DIAGRAM:
ELEMENTS USED IN MOBILE PHONE DETECTOR:
• IC CA3130
• IC NE555
• T1 BC548
• ANTENNA
• PIEZO BUZZER
• 5 INCH LONG ANTENNA
• ON/OFF SWITCH
• POWER SUPPLY
IC’S USED IN MOBILE PHONE DETECTOR:
IC CA3130

• CA3130 are op amps that combine


the advantage of both CMOS and
bipolar transistors.
• Ideal for Single-Supply Applications
• Common-Mode Input-Voltage
Range Includes Negative Supply
Rail; Input Terminals can be Swung
0.5V Below Negative Supply Rail
• CMOS Output Stage Permits Signal
Swing to Either (or both) Supply
Rails
IC NE555

• The 555 timer IC is an integrated


circuit used in a variety of timer, pulse
generationand oscillator applications.
• The 555 can be used to provide time
delays, as an oscillator, and as a flip-flop
element.
• Derivatives provide two (556) or four
(558) timing circuits in one package.
TRANSISTOR:
T1 BC548

• BC548 is general purpose silicon,


NPN, bipolar junction transistor.
• It is used for amplification and
switching purposes.
• The current gain may vary between
110 and 800.
• The maximum DC current gain is
800
ANTENNA:
• The antenna consists of a
radiating element that
splits the rods and make
current flow through the
center by using a feeder
at the transmitter out
that takes from the
receiver.
• Transmitter and receiver
antennas are often very
similar in design.
PIEZO BUZZER
• Piezo buzzer is an electronic
device commonly used to produce
sound.
• Light weight, simple construction
and low price make it usable in
various applications like car/truck
reversing indicator, computers,
call bells etc.
• Piezo electric materials are either
naturally available or manmade
CIRCUIT DIAGRAM:
WORKING:
• When mobile phone is active, it transmits the signal in the form of sine
wave which passes through the space.
• The moment the bug detects RF transmission signal from an activated
mobile phone, it starts sounding a beep alarm and the LED blinks.
• The alarm continues until the signal transmission ceases.
• The encoded audio/video signal contains electromagnetic radiation which
is picked up by the receiver in the base station.
• An ordinary RF detector using tuned LC circuits is not suitable for detecting
signals in the GHz frequency band used in mobile phones.
ADVANTAGES
• The key advantages that have allowed transistors to replace their vacuum tube
predecessors in most applications are
• Small size and minimal weight, allowing the development of miniaturized
electronic devices
• Highly automated manufacturing processes, resulting in low per-unit cost.
• Lower possible operating voltages, making transistors suitable for small, battery-
powered applications.
• No warm-up period for cathode heaters required after power application.
• Lower power dissipation and generally greater energy efficiency.
• Higher reliability and greater physical ruggedness.
APPLICATIONS:
Cell phone detector is useful where the use of mobile phone is prohibited
like:
• Examination halls
• Hospitals
• Petrol pumps
• Gas stations
• Military bases
• Court of laws
• Historical places
CONCLUSION:
• This pocket size mobile transmission detector or sniffer can sense the
presence of an activated mobile phone from a distance of one and half
meters.
• So it can be used to prevent use of mobile phones in examination halls ,
confidential rooms.
• The illegal use of cell phones is a growing and dangerous problem in
correctional institutions worldwide. These devices are a significant threat
to prison security and circumvent the monitoring processes in prisons,
while helping inmates commit new crimes both inside and outside the
facility.
FUTUREWORK:
• The proto type version has only limited range of 2meters.
• But if a preamplifier stage using JFET or MOSFET transistor is used as an
interface between the capacitor and IC range can be increased.

THANK YOU ……

You might also like