Scribd
Upload
36 views15 pages

Welcome To Our Presentation

This presentation discusses the maximum power transfer theorem. It introduces the group members and states that the maximum power transfer theorem ensures the condition to transfer the maximum power to the load. When the load resistance equals the internal resistance of the voltage source, the maximum power will be delivered to the load. As an example, a speaker with 8 ohm impedance driven by an amplifier with 500 ohm internal impedance will receive maximum power transfer when the impedances match.

Uploaded by

al amin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
36 views15 pages

Welcome To Our Presentation

This presentation discusses the maximum power transfer theorem. It introduces the group members and states that the maximum power transfer theorem ensures the condition to transfer the maximum power to the load. When the load resistance equals the internal resistance of the voltage source, the maximum power will be delivered to the load. As an example, a speaker with 8 ohm impedance driven by an amplifier with 500 ohm internal impedance will receive maximum power transfer when the impedances match.

Uploaded by

al amin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 15

Welcome to our

presentation
Submittted By
Submitted To
Name - ID
Tasnuva Ali
Bappi -(171-23-
Assistant Professor
4944)
Department of ETE
Lutfur -(171-23-
Daffodil international university
5006)
Rownok -(171-23-
4981)
Anik -(171-23-
5005)
Group member :

Momo (171-23-4944)
Bappi (171-23-4944)
Lutfur (171-23-5006)
Apu (171-23-4958)
Rownok (171-23-4981)
Khalid (171-23-4959)
INTRODUCTION:

 In any electric circuit,the electrical energy from the supply is


delivered to the load where it is converted into a useful work.
 Pratically ,the entire supplied power will not present at load due
to the heating effect and other constraints in the network .
 Therefore ,there exist a certain difference between drawing and
delivering power.
 The load size always affects the amount of power transfered from
the supply source i.e.,any change in the load resistance results to
change in power transfer to the load .thus`thr maximum power
transfer theorem ensures the condition to transfer the maximum
power to the load .let us see ,how,.
 CONTENTS:
 Introduction
 Circuit Diagram
 Maximum power transfer theorem statement
 Proof of maximum transfer theorem
 Practical Application
Practical Application:

Consider the practical example of a speaker with an


impedance of 8 ohms is driven by audio amliplifier
with its internal impedance of 500 ohms .the
Thevenin,s equivalent circuit is also shown in figure

 According to the maximum power transfer


theorem ,the power is maximized at the
load is impedance is 500 ohms (same as
internal impedance ).Or else internal
resistance had to be changed to 8 hours to
MAXIMUM POWER TRANSFER
THEOREM STATRMENT:
 The maximum power transfer theorem states that in
linear ,bilateral DC network ,maximum power is
delivered to the load when the load resistance is equal
to the internal resistance of a source .If it is an
independent voltage source ,then it is series
resistance (internal resistance Rs) or if it is
independent current source ,then its parallel
resistance (internal resistance Rs) must equal to the
load resistance RL to deliver maximum power to the
load .

You might also like