Scribd
Upload
42 views

Basic Elec - Chapter Three Modified2

1. The document discusses operational amplifiers (op-amps), which are versatile electronic circuits used to perform mathematical operations like summation, integration, differentiation. 2. An op-amp consists of inputs, outputs, and power terminals. It functions as a voltage-controlled voltage source and can create inverted or non-inverted voltage gains depending on input terminal connections. 3. Common op-amp circuits include inverting amplifiers, non-inverting amplifiers, summing amplifiers, difference amplifiers, and cascaded multiple op-amp circuits which produce higher overall gains.

Uploaded by

Nebiyou Korra
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
42 views

Basic Elec - Chapter Three Modified2

1. The document discusses operational amplifiers (op-amps), which are versatile electronic circuits used to perform mathematical operations like summation, integration, differentiation. 2. An op-amp consists of inputs, outputs, and power terminals. It functions as a voltage-controlled voltage source and can create inverted or non-inverted voltage gains depending on input terminal connections. 3. Common op-amp circuits include inverting amplifiers, non-inverting amplifiers, summing amplifiers, difference amplifiers, and cascaded multiple op-amp circuits which produce higher overall gains.

Uploaded by

Nebiyou Korra
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 11

Chapter Three

Operational Amplifiers
Introduction
 Having learned the basic laws and theorems for circuit analysis, we are now
ready to study an active circuit element of paramount importance: the
operational amplifier, or op amp for short. The op amp is a versatile circuit
building block.
The op amp is an electronic unit that behaves like a voltage-
controlled voltage source.(Active element (source))
 It can also be used in making a voltage- or current-controlled current source.
An op amp can sum signals, amplify a signal, integrate it, or differentiate it.
The ability of the op amp to perform these mathematical operations is the
reason it is called an operational amplifier.
 It performs some mathematical operations when external components,
such as resistors and capacitors, are connected to its terminals. Thus
 The op amp is an electronic device consisting of a complex arrangement of resistors,
•   transistors, capacitors, and diodes.
 The five important terminals are:
1. The inverting input, pin 2.
2. The noninverting input, pin 3.
3. The output, pin 6.
4. The positive power supply , pin 7.
5. The negative power supply , pin 4.
An input applied to the noninverting terminal will appear with the same polarity at the
output, while an input applied to the inverting terminal will appear inverted at the
output.

Figure typical op amp a) pin configuration b) circuit symbol


• As an active element, the op amp must be powered by a voltage supply as
shown in Figure.
Figure: powering op amp
• By KCL,
• The equivalent circuit model of an op amp is shown in figure below. The
output section consists of a voltage-controlled source in series with the
output resistance Ro. The input resistance Ri is the Thevenin equivalent
resistance seen at the input terminals, while the output resistance Ro is the
Thevenin equivalent resistance seen at the output. The differential input
voltage vd is given by
where v1 is the voltage between the inverting terminal and ground and v2
is the voltage between the noninverting terminal and ground. The op amp
senses the difference between the two inputs, multiplies it by the gain A,
and causes the resulting voltage to appear at the output. Thus, the output vo
is given by V0=A Vd=A(V2-V1) equt ckt
A = open loop vge gain
 A negative feedback is achieved when the output is fed back to the inverting
•  terminal of the op amp. When there is a feedback path from output to input, the
ratio of the output voltage to the input voltage is called the closed-loop gain.
Ideal Op Amp
An op amp is ideal if it has the following characteristics: Ideal op amp model
1. Infinite open-loop gain, A≈∞
2. Infinite input resistance, Ri ≈∞
3. Zero output resistance, Ro ≈ 0.
Two important characteristics of an ideal
Op amp are:
1. The currents into both input
terminals are zero:
i1=0, i2=0

2.The voltage across the input terminals is equal to zero; i.e., =-= 0
=
Inverting Amplifier
In this circuit, the noninverting input is grounded, vi is connected to the inverting
input through R1, and the feedback resistor Rf is connected between the inverting
input and output. Our goal is to obtain the relationship between the input voltage vi
and the output voltage vo. Applying KCL at node 1,

OR

The voltage gain is


 An inverting amplifier reverses the polarity of the input signal while amplifying it.

Figure An equivalent circuit for the inverter ckt

Noninverting Amplifier
In this case, the input voltage vi is applied
directly at the noninverting input terminal, and resistor R1 is connected
between the ground and the inverting terminal.

Figure The noninverting amplifier.

Applying KCL at the inverting terminal


gives

But v1=v2=vi The above equation becomes


 The voltage gain is
 Which does not have a negative sign. Thus, the output has the same polarity as the
input.
 A noninverting amplifier is an op amp circuit designed to provide a positive voltage
gain.
Notice that if feedback resistor Rf = 0 (short circuit) or R1=∞ (open circuit) or
both, the gain becomes 1. Under these conditions (Rf = 0 and R1 = ∞ ), the circuit
in the above becomes the figure shown below, which is called a voltage follower (or
unity gain amplifier) because the output follows the input. Thus, for a voltage
follower

Figure: The voltage follower.


Summing Amplifier
 A summing amplifier is an op amp circuit that combines several inputs and
produces an output that is the weighted sum of the inputs

Applying KCL at node a gives

But
 We note that va =0

 Indicating that the output voltage is a weighted sum of the inputs. For this reason,
the circuit in the above figure is called a summer. Needless to say, the summer can
have more than three inputs.
Difference Amplifier
A difference amplifier is a device that amplifies the difference between two inputs but
rejects any signals common to the two inputs. It is also known as the substractor.

Applying KCL to node a,

OR
•• Applying
  KCL to node b, OR
• But va = v , substituting in place of va
b

OR

• Since a difference amplifier must reject a signal common to the two inputs, the
amplifier must have the property that vo =0 when v1 =v2. This property exists when

Thus, when the op amp circuit is a difference amplifier,

If = and = , the difference amplifier becomes a substractor,


with the output
Cascaded Op Amp Circuits
 As we know, op amp circuits are modules or building blocks for designing
complex circuits. It is often necessary in practical applications to connect op
amp circuits in cascade (i.e., head to tail) to achieve a large overall gain. In
general, two circuits are cascaded when they are connected in tandem, one
behind another in a single file.
 A cascade connection is a head-to-tail arrangement of two or more op amp
circuits such that the output of one is the input of the next.
 When op amp circuits are cascaded, each circuit in the string is called a stage;
the original input signal is increased by the gain of the individual stage. Since
the output of one stage is the input to the next stage, the overall gain of the cascade
connection is the product of the gains of the individual op amp circuits, or
Figure : A three-stage cascaded connection.

You might also like