Scribd
Upload
27 views

1.engineer Will Present at Site During The

The document outlines a site quality checking process that involves engineers inspecting excavation work and rebar installation. Cluster in-charges check pre-concreting preparations and zonal in-charges oversee raft and final concrete pours. Vendors test concrete cubes while being observed, and sites are cured for 3 days with inspections by engineers and security to verify quality from start to finish.

Uploaded by

theway2pawan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
27 views

1.engineer Will Present at Site During The

The document outlines a site quality checking process that involves engineers inspecting excavation work and rebar installation. Cluster in-charges check pre-concreting preparations and zonal in-charges oversee raft and final concrete pours. Vendors test concrete cubes while being observed, and sites are cured for 3 days with inspections by engineers and security to verify quality from start to finish.

Uploaded by

theway2pawan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 2

Present Site Quality Checking Process

1.Engineer will present at site during the


excavation. He will check the pit size and bar
bending as per the drawing.

2. Pre concreting checklist will be follow during the


time of pre-concreting, Cluster In charge will
present at the time of Pre-concreting.

3. During the time of RAFT and Final concrete Zonal


In charge will present.

4. Post concreting checklist will be follow at the time


of post concreting
Present Site Quality Checking
Process
1.Cube test taken by vendor to check the
concrete quality in the presence of our
Engineer.

2.After completion of civil work we will give


Curing for about 3 days .

3.Curing process will be inspected by our Site


Engineer and cross – verified by site
security.

4.Finally we all should take quality as main


priority from Acquisition to O&M.

You might also like