Scribd
Upload
59 views

Solidworks Teacher Guide Lesson 10: School'S Name Teacher'S Name Date

This document provides an overview of how to use loft features in SolidWorks. Key steps include: 1. Creating offset planes to sketch profiles on different planes. 2. Sketching profiles on each plane, such as squares, circles, and rectangles. 3. Using the loft feature to blend the profiles together, creating a preview curve to check the result. 4. Creating a second loft feature between two profiles to make the chisel bit. The document emphasizes best practices like selecting corresponding points on profiles and sketching centered shapes.

Uploaded by

Rafael Diaz Romero
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
59 views

Solidworks Teacher Guide Lesson 10: School'S Name Teacher'S Name Date

This document provides an overview of how to use loft features in SolidWorks. Key steps include: 1. Creating offset planes to sketch profiles on different planes. 2. Sketching profiles on each plane, such as squares, circles, and rectangles. 3. Using the loft feature to blend the profiles together, creating a preview curve to check the result. 4. Creating a second loft feature between two profiles to make the chisel bit. The document emphasizes best practices like selecting corresponding points on profiles and sketching centered shapes.

Uploaded by

Rafael Diaz Romero
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 27

SolidWorks Teacher Guide Lesson 10

School’s Name
Teacher’s Name
Date
Loft Feature Overview

• Blends multiple profiles together.


• A Loft feature can be a base, boss, or cut.
To Create a Simple Loft Feature:

1. Create the planes required for the profile


sketches.
Each sketch should be on a different plane.
Creating a Simple Loft Feature:

• Sketch a profile on
the first plane.
• Sketch the remaining
profiles on their
corresponding
planes.
• Click Loft on the
Features toolbar.
Creating a Simple Loft Feature:

• Select each profile. Preview curve

• Examine the preview


curve and the
connectors.
• Click OK .

Connectors
Additional Information About Lofts:

• Neatness counts!
– Select the profiles in order.
– Click corresponding points on each profile.
– The vertex closest to the selection point is used.
– Drag the connectors to improve if necessary.

• A preview curve connecting


the profiles is displayed.
• Review the curve in order to
address adjustments.
Neatness Counts!

• Unexpected results occur when you don’t pick


corresponding points on each profile.
Neatness Counts!

• Rebuild errors can occur if


you select the profiles in the
wrong order.
To Create an Offset Plane:

1. Hold down Ctrl and drag the


Front plane in the direction you
want the offset to go.

NOTE: Ctrl-drag is a common Windows


technique for copying objects.

2. The Plane PropertyManager


appears.
3. Enter 25mm for Distance.
4. Click OK .
Creating an Offset Plane – Results
Setting up the Planes

Additional offset planes are


required.

• Plane2 is offset 25mm


from Plane1.
• Plane3 is offset 40mm
from Plane2.
• Verify the positions of the
planes.
– Click View, Planes.
– Double-click the planes to
see their offset dimensions.
Sketch the Profiles

• The Loft feature is created


with 4 profiles.
• Each profile is on a separate
plane.
To Create the First Profile:

1. Open a sketch on the Front


plane.
2. Sketch a square.
3. Exit the sketch.
Best Practice

There is a better way to sketch a centered square:

1. Sketch a rectangle.
2. Sketch a centerline from
corner to corner.
3. Relate the centerline to
the origin with a Midpoint
relation. This keeps the
rectangle centered.
4. Add an Equal relation to one horizontal and
one vertical line. This makes the rectangle a
square.
5. Dimension one side of the square.
Sketch the Remaining Profiles:

1. Open a sketch on Plane1.


2. Sketch a circle and dimension
it.
3. Exit the sketch.
4. Open sketch on Plane2.
5. Sketch a circle whose
circumference is coincident
with the corners of the
square.
6. Exit the sketch.
To Copy a Sketch:

1. Select Sketch3 in the FeatureManager design


tree or graphics area.
2. Click Edit, Copy or click
Copy on the Standard
toolbar.
3. Select Plane3 in the
FeatureManager design tree
or graphics area.
4. Click Edit, Paste or click
Paste on the Standard toolbar .
A new sketch, Sketch4, is created on Plane3.
More About Copying Sketches

• External relations are deleted.


• For example, when you copied Sketch3, the
geometric relations locating the center and
defining the circumference were deleted.
• Therefore, Sketch4 is underdefined.
• To fully define Sketch4, add a Coradial relation
between the copied circle and the original.
• If you sketch a profile on the wrong plane, move
it to the correct plane using Edit Sketch Plane.
Do not copy it.
To Move a Sketch to a Different Plane:

1. Right-click the sketch in the


FeatureManager design tree.
2. Select Edit Sketch Plane from the
shortcut menu.

3. Select a different plane.


4. Click OK .
Loft Feature

• The Loft feature blends the 4


profiles to create the handle of
the chisel.

1. Click Loft on the Features


toolbar.
Creating the Loft Feature:

2. Select each profile.


Click on each sketch in
the same relative location
– the right side.
3. Examine the preview
curve.
The preview curve shows
how the profiles will be
connected when the loft
feature is created.
Preview curve
Creating the Loft Feature:

4. The sketches are listed in the


Profiles box.

The Up/Down arrows are used


to rearrange the order of the
profiles.
Creating the Loft Feature:

5. Click OK .
A Second Loft Feature Creates the Bit of
the Chisel:

• The second Loft feature is


composed of two profiles:
Sketch5 and Sketch6.
To Create Sketch5:

1. Select the square face.


2. Open a sketch.
3. Click Convert Entities .
4. Exit the sketch.
To Create Sketch6:

1. Offset Plane4 behind the


Front plane.
Hold down Ctrl and drag
the Front plane in the
direction you want the
offset to go.
2. The Plane PropertyManager appears.
3. Enter 200mm for Distance.
4. Click OK .
To Create Sketch6:

5. Open a sketch on
Plane4.
6. Sketch a narrow
rectangle.
7. Dimension the
rectangle.
8. Exit the sketch.
To Create the Second Loft Feature:

1. Click Loft on the Features toolbar.


2. Select Sketch5 in the Sketch 6
lower right corner of
the square.
3. Select Sketch6 in the
lower right corner of
the rectangle. Preview

Sketch 5
4. Examine the preview
curve.
5. Click OK.
Finished Chisel
Tips and Tricks

Remember best practices:


• Only two dimensions are required
for the narrow rectangle.
• Use a centerline and a
Midpoint relation to
center the rectangle.
• This technique
eliminates two dimensions
and it captures the design intent.
Tips and Tricks

• You do not need


Sketch5 (the sketch
with the converted
edges of the square
face).
• Loft can use the face
as a profile.
• Select the face near
the corner.

You might also like