ICS 2306 : COMPUTER

NETWORKS
Chapter 3
Wireless Devices
SCOPE AND COVERAGE
 Wireless devices
 Wireless networking standards

Wireless Devices
 Issues for wireless networks
 Wireless networking protocols

 By the end of this topic, students will be able to:

 Explain the function and rationale of wireless networking
standards
 Explain a range of contemporary wireless standards and their
relevant applications
WIRELESS NETWORKS
 Wireless Networks are networks in which electromagnetic
waves carry the signal over part or all of the communication
path.

Wireless Devices
 This is in contrast to networks that utilise physical media,
such as fibre-optic cable, coaxial cable, etc.
ADVANTAGES OF WIRELESS
 Increased mobility
 Increased flexibility

Wireless Devices
 Convenience
 Opportunities to provide new services
HISTORY OF WIRELESS
 Wirelesstechnology has been around for a few decades.
 Take up was initially slow:

Wireless Devices
 Low data transfer rates
 Little interoperability between different devices

 High cost
 Great increase in number of wireless networks due to
standardization, greater speeds and reduced costs
WIRELESS DEVICES
 Computer peripherals
 Wireless LANs

Wireless Devices
 Bluetooth devices
 RFID
 Many others, e.g. mobile telephones, TV remote control,
GPS, etc.
WIRELESS COMPUTER PERIPHERALS - 1
 Devices include mouse, printer, keyboard, scanner, etc.
 Can allow multiple devices to use the same peripheral

Wireless Devices
 Removes the need for cumbersome cables
 Limited flexibility by operating a little distance away from
the PC
WIRELESS COMPUTER PERIPHERALS - 2
 Use two technologies:

Infrared (IR) is cheaper, has less interference,

Wireless Devices


but requires direct optical contact between the

peripheral and receiver.
 Radio frequency (RF) works in all angles

relative to the receiver, even with objects

between the peripheral and receiver, but it is
more expensive.
WIRELESS LAN (WLAN)
 Wireless networking relies on a broadcast signal.
 Suitably configured devices contain receivers that pick up
and understand the broadcast signal.

Wireless Devices
 Devices can process data and broadcast signals as well.
WLAN COMPONENTS - 1
 Wireless Adapters (WA)

Capable of transmitting and receiving wireless

Wireless Devices


digital signals and are usually contained in the

user device
 Modern PCs, laptops, smartphones, etc. all

come with a wireless adapter.

WLAN COMPONENTS - 2
 Access Points (AP)

Wireless Devices
– Acts as a base station that receives and
transmits signals via radio waves
– It provides the link between the devices and
the network.
– .
HOTSPOTS
 A wireless client may be any device (computer or peripheral)
designed to use the same wireless protocol as the access
point.

Wireless Devices
 A client must be in range of the access point.
 The area within range of an AP is known as a “hotspot”.
 Overlapping hotspots allow a wireless network to cover a
wide area.
BLUETOOTH
 A shortrange radio link with a range of around 10 metres
 Allows a number of devices to link together in an ad-hoc
network

Wireless Devices
 Does not require line of sight
 Can provide communication links between phones, PDAs,
computers, peripherals, etc
 Can transmit voice and data
PICONETS
 The Bluetooth ad-hoc networks
 Can have up to eight devices on the same piconet

Wireless Devices
 Each piconet is synchronised to the clock of one device on it
(the master).
 Other devices are slaves
 Several piconets may be active in the same location.
 Each device can be a part of several piconets, but only master
of one.
 If a device is involved in more than one piconet, it is said to
be involved in a scatternet, but this does not mean that it has
any routing capabilities.
RFID TAGS
 A radio frequency identification tag is a small object that is
attached to another object in order to identify it via radio
waves

Wireless Devices
 Has two main components:

 An integrated circuit that modulates and

demodulates a radio signal, stores data and
processes information
 Antenna for transmitting/receiving
RFID TAG USES
 A wide range of uses including:

Passports

Wireless Devices


 Travel cards

 Wildlife tracking

 Stocktaking in shops
OTHER WIRELESS DEVICES
 There are many devices in common use that are wireless:
 Mobile telephones

Wireless Devices
 TV

 Satellite communications

 Pagers (e.g. hospital)

 Remote alarms

 GPS

 Remote controls (TV, model aircraft)

 Two-way radio …
WIRELESS STANDARDS
 IEEE 802.11 series – Wireless LAN
 Bluetooth/IEEE 802.15 - Wireless Personal Area Network

Wireless Devices
 IEEE 802.16 - Wireless Metropolitan Area Networks
 IEEE 802.20 - Mobile Broadband Wireless
WHY DO WE NEED STANDARDS?
 There are a number of key reasons for creating and adhering
to standards for wireless networking.
 Interoperability

Wireless Devices
 Different devices work together
 Many equipment manufacturers
 Customers can switch for better price or
features
 Allocation of frequencies
 The radio wave spectrum is used for many
applications
THE IEEE 802.11 STANDARDS
 WLAN or WiFi
 Wireless LAN Media Access Control and Physical Layer
specification

Wireless Devices
 Contains a number of revisions and interpretations:

 802.11a,b,g,etc. are amendments to the original

802.11 standard
 Products that implement 802.11 standards must pass tests and
are referred to as "Wi-Fi certified”.
THE ORIGINAL IEEE 802.11
 Data rates of up to 2 Mbps
 Uses Frequency Hopping Spread Spectrum (FHSS) or Direct
Sequence Spread Spectrum (DSSS) signalling techniques

Wireless Devices
 2.4 GHz frequency range
IEEE 802.11 REVISIONS - 1
 802.11a

 Uses Orthogonal Frequency-Division Multiplexing

Wireless Devices
(OFDM)
 Enhanced data speed to 54 Mbps

 5 GHz frequency range

 802.11b

 Added higher data rate modes to DSSS

 Data speeds up to 11 Mbps

 22 MHz Bandwidth yields 3 non-overlapping

channels in the frequency range of 2.4 GHz

frequency band.
IEEE 802.11 REVISIONS - 2
 802.11d

 Enhancement to 802.11a and 802.11b allows

Wireless Devices
for global roaming
 Particulars can be set at Media Access Control

(MAC) layer

 802.11e

 Enhancement to 802.11 includes quality of

service features
 Facilitates prioritisation of data, voice, and

video transmissions
IEEE 802.11 REVISIONS - 3
 802.11g

 Extends the maximum data rate in the 2.4 GHz

Wireless Devices
band, permits interoperation with 802.11b
devices
 Uses OFDM

 54 Mbps, with fall-back speeds that include the

b speed
 802.11h

 Deals with interference

 802.11i

 Deals with security

IEEE 802.11 REVISIONS - 4
 802.11n

 High speed WLAN

Wireless Devices
 Can theoretically operate at bandwidths up to

600 Mbps
 Applications supporting 100 Mbps using the

TCP/IP protocol are available.

 Uses Multiple-Input Multiple-Output (MIMO)

technology
 Uses 5 GHz band
WHICH VERSION?
 Most modern wireless routers will support 802.11n plus
802.11b and 802.11g

Wireless Devices
 Older routers may only support 802.11b and 802.11g

 Higher speed networks should use 802.11n

IEEE 802.15/BLUETOOTH
 IEEE 802.15 covers Wireless Personal Area Networks
(WPAN).
 Working Group1 (IEEE 802.15.1) is a standard based upon

Wireless Devices
Bluetooth version 1.1.
 The Bluetooth Special Interest Group (SIG) is a separate
non-profit organisation that oversees the Bluetooth standards.
 The Bluetooth SIG and IEEE are not related

 No IEEE standards match recent Bluetooth

standards
BLUETOOTH
 Open wireless technology standard
 Exchanges data over short distances

Wireless Devices
 Uses short wavelength radio transmissions
 Used in fixed and mobile devices
 Creates Personal Area Networks (PANs)
BLUETOOTH RANGE
 The range is specific to the application.
 The Core Specification states a minimum range of 10 meters
or 30 feet.

Wireless Devices
 However, there is no set limit.
 Manufacturers are allowed to tune their devices to provide
the range they require.
BLUETOOTH SPECTRUM
 Operates in the unlicensed industrial, scientific and medical
(ISM) band
 Frequencies 2.4 to 2.485 GHz are used

Wireless Devices
 Uses a spread spectrum, frequency hopping, full-duplex
signal at a nominal rate of 1600 hops/sec.
 The 2.4 GHz ISM band is available and unlicensed in most
countries.
BLUETOOTH INTERFERENCE
 Adaptive frequency hopping (AFH) reduces interference
between wireless technologies sharing the 2.4 GHz spectrum.
 The technology detects other devices in the spectrum and

Wireless Devices
avoids the frequencies they are using.
BLUETOOTH RANGE
 Range depends on class of radio used:
 Class 3 radios have a range of up to 1 metre or

Wireless Devices
3 feet
 Class 2 radios, most commonly found in mobile

devices, have a range of 10 metres or 33 feet

 Class 1 radios, used primarily in industrial

devices, have a range of 100 metres or 300 feet

IEEE 802.16
 Mobile Broadband Wireless Access
 Also known as  WiMAX (from "Worldwide Interoperability
for Microwave Access")

Wireless Devices
 Provides up to 40 Mbps
 Currently working on the IEEE 802.16m update

 Expected to offer up to 1 Gbps fixed speed

 Required for 4G networks
WIMAX USAGE
 Provides mobile broadband or at-home broadband
connectivity across whole cities or countries.

Wireless Devices
 Deploying a WiMAX network has low cost in comparison to
DSL or Fibre-Optic.

 Can provide broadband in remote locations

COMPARISON WITH WIFI
 WiMAX covers many km and uses an unlicensed spectrum to
provide access to a local network.

Wireless Devices
 Wi-Fi is more popular in end user devices.

 802.11 supports direct (infrastructure mode), ad hoc or peer-

to-peer networking between end user devices without an
access point, while 802.16 end user devices must be in range
of the base station.
IEEE 802.20
 Mobile Broadband Wireless Access (MBWA) 
 Aims to enable worldwide deployment of interoperable
mobile broadband wireless access networks, including:

Wireless Devices
 Mobile and ubiquitous Internet access
 Transparent support of Internet applications

 Access to enterprise intranet services

 Transparent access to infotainment and location

services
IEEE 802.20 DETAIL
 Bandwidths of 5, 10, and 20 MHz
 Peak data rates of 80 Mbps

Wireless Devices
 Uses MIMO
 Supports low-bit rates efficiently, carrying up to 100 phone
calls per MHz
 Allows network access whilst travelling at speeds of 250
km/h
WIRELESS ISSUES
 There are a number of issues that may cause concern for
those using radio frequencies for network media rather than
physical cables, these include:

Wireless Devices
 Range
 Interference

 Security
RANGE
 The range where wireless signals can be reliably transmitted
and received is a key parameter for a wireless network.
 In ideal conditions, a WLAN can have a range of 300m or

Wireless Devices
more.
 Real world conditions are not ideal.
 In an office/home, range can drop as low as 10m.
INDOOR RANGE
 WLANs are normally implemented indoors and a number of
factors will affect the range of the network:

Wireless Devices
 Building design
 Construction materials

 Room layout

 The location and type of other electrical devices

INSTALLATION
 Technically simple regarding installation and configuration

Wireless Devices
 Installation does need to take into account the location of:

 access points
 networked devices

 obstacles
INTERFERENCE
 Radio frequency signals can be negatively affected by other
radio signals in the same frequency band.

Wireless Devices
 There are two main sources of such signals:

 Reflected signals from the wireless network

itself
 Other electrical equipment
MULTIPATH
 Radio frequency signals can be affected by signals bouncing
off building surfaces and other obstacles
 Signals can come from multiple directions (multipath)

Wireless Devices
 May cancel or reduce signal strength
ELIMINATING MULTIPATH
 Most access appointments include software tools that analyse
signal strength.
 These can be used to test signal strength of networked

Wireless Devices
computers.
 Most networked equipment can be moved to improve signal
strength.
EXTERNAL INTERFERENCE
 Radio emissions from other devices using the same frequency
band are a source of interference
 There are particular industries where this is a problem

Wireless Devices
 Hospitals use a lot of monitoring equipment
that may use the same frequency
 Equipment may need to be isolated to prevent the
interference.
SECURITY ISSUES
 Security can be compromised in different ways from hard-
wired networks.
 Radio transmission cannot be limited to within the network

Wireless Devices
premises.
 Therefore, the transmitted signals can be intercepted by
devices outside of a building and this data could include
sensitive business or personal data.
DRIVE–BY HACKING
 Any IEEE 802.11 receiving device using the relevant
standard could pick up a transmitted signal.
 A hacker could be located near a business premises and pick

Wireless Devices
up these signals.
 As the signals are broadcast, there would be no way of
knowing that an unauthorised person had accessed the signal.
WIRED EQUIVALENT PRIVACY (WEP)
 The first major attempt to make wireless networks as secure
as wired networks
 Susceptible to eavesdropping

Wireless Devices
 Has been deprecated by IEEE as it does not meet its security
goals
 Still widely in use
WIFI PROTECTED ACCESS (WPA)
 Broughtin as an improvement on WEP
 WPA is more secure and comes in two forms

Wireless Devices
 A form using pre-shared keys for home
networks
 A more secure form using an authentication

server for business networks

 WPA has also been cracked and been replaced by WPA2
which is more secure.
BLUETOOTH SECURITY
 There are a number of known security flaws with Bluetooth
devices and these include:

Wireless Devices
 Bluejacking
 Bluesnarfing

 Bluebugging

 Bluetoothing
BLUEJACKING
 The hacker sends a phone contact or business card to another
nearby phone.

Wireless Devices
 The ‘name' field of the contact can be misused by replacing it
with a suggestive text.

 Thisis equivalent to spam email since both are unsolicited

messages displayed on recipients' end without consent.
BLUESNARFING
 Accessesor steals data like messages, such as a calendar or
phone book from the target device.

Wireless Devices
 There have been reports of the tools that use methods such as
device address guessing and brute force in order to break-in,
even when device is configured as ‘invisible‘.
BLUEBUGGING
 The target device is controlled by the attacker who sends
commands as if they had physical access.
 Similar to a trojan

Wireless Devices
BLUETOOTHING
 Short range social networking

Wireless Devices
 Harassment of individuals within range
SECURELY USING BLUETOOTH
 Keep devices in the disabled state, enable it only when
needed
 Keep the device in non-discoverable mode

Wireless Devices
 Do not accept any unknown and unexpected request for
pairing your device
 Use non regular patterns as PIN keys
 Keep a check of all paired devices and delete any paired
device which you are not sure about
 Register your device at the manufacturer site
PROTOCOL STACKS
 Wireless networks have layered protocol stacks like other
networks.
 We will not deal with the higher level layers.

Wireless Devices
 We will examine protocol stacks and specific technologies of:

 WLAN
 Bluetooth
WLAN PROTOCOL STACK

Wireless Devices
WLAN LLC & MAC LAYERS
 LLC designed to provide the functionality of the High-Level
Data Link Control protocol of the standard TCP/IP protocol
stack

Wireless Devices
 LLC allows an 802.11 protocol stack to be grafted underneath
any TCP/IP implementation with little or no change to the
upper layers

 MAC provides the same functions as in other protocol stacks

WLAN PHY LAYER
 Original802.11 standard defined three specific physical
network protocols:

Wireless Devices
 An infrared communications standard
 A Direct-Sequence Spread Spectrum (DSSS)

RF protocol
 A Frequency-Hopping Spread Spectrum

(FHSS) RF protocol
 Later versions of the 802.11 standard redefined the physical
layer to be DSSS only.
BLUETOOTH PROTOCOL STACK - 1

Wireless Devices
BLUETOOTH PROTOCOL STACK - 2
 Thebottom layer of the stack is the HCI, the Host Controller
Interface

Wireless Devices
 This is the interface between the host (e.g. a
computer) and the controller (e.g. a Bluetooth
device).
 The
layer above is L2CAP, the Logical Link Controller
Adaptation Protocol

 This acts as the data multiplexer for other

layers.
BLUETOOTH PROTOCOL STACK - 3
 Bluetooth Network Encapsulation Protocol (BNEP)
 Allows the running of other networking

Wireless Devices
protocols, such as IP, TCP, and UDP, over
Bluetooth
 RFCOMM is the virtual serial port protocol
 Allows a Bluetooth device to simulate the
functions of a serial port
 Service Discovery Protocol (SDP)
 Used whenever you want to find services on a
remote Bluetooth device
BLUETOOTH PROTOCOL STACK - 4
 The Object Exchange layer (OBEX) protocol layer

Implemented above the RFCOMM layer and is

Wireless Devices


useful when you want to transfer data as an

object, such as files
BLUETOOTH PROTOCOL STACK - 5
 Audio/visual control transport protocol
(AVCTP) and Audio/visual data transport

Wireless Devices
protocol (AVDTP)
- Used to control and distribute audio and video
over Bluetooth
– Used when you want to control the functions
of a media player or if you want stream audio
in stereo
WIRELESS TECHNOLOGIES
 Orthogonal Frequency Division Multiplexing
 Multiple Input Multiple Output

Wireless Devices
 Frequency Hopping Spread Spectrum
 Adaptive Frequency Hopping
 Direct Sequence Spread Spectrum
FDM
 Frequency division multiplexing (FDM) is a technology that
allows transmission of multiple signals simultaneously over a
single transmission cable or wireless system.

Wireless Devices
 Each signal travels within its own unique frequency range
(carrier), which is modulated by the data (text, voice, video,
etc.).
OFDM
 Orthogonal FDM is a spread spectrum technique.
 Data is distributed over a large number of carriers, spaced
apart at precise frequencies.

Wireless Devices
 Demodulators only pick up their own frequencies and not
other frequencies.
 The benefits of OFDM are:

 high spectral efficiency

 resiliency to interference

 less distortion
MIMO
 Multiple Input, Multiple Output OFDM
 Uses multiple antennas to simultaneously transmit/receive
data

Wireless Devices
 This spatial multiplexing increases data-transmission speed
by a factor equal to the number of transmitting antennae

 4 antennae = 4 x speed
 All data is transmitted in the same frequency band, which
utilises the spectrum very efficiently.
FHSS
 Bluetooth
 Transmitter hops from frequency to frequency hundreds of
times per second

Wireless Devices
 Pseudo-random number generation is used to produce the
sequence of frequencies.
 All stations use the same seed and hop to the same frequency
at the same time, thus staying synchronised.
 May use TDMA or CDMA
TIME DIVISION MULTIPLE ACCESS
 Frequencies divided into time slots allocated to individual
users.
 A user is allocated a slot on a single frequency and then

Wireless Devices
moved to another frequency
 Several different data streams will be transmitted on one
frequency in short bursts with an allocated timeslot
CODE DIVISION MULTIPLE ACCESS
 Eachtransmitter may transmit over the whole
frequency spectrum all of the time.

Wireless Devices
 Coding theory is used to separate all of the
multiple and simultaneous transmissions.

 Comparison of TDMA and CDMA

 TDMA is like a classroom where each person takes a turn to speak.
 CDMA is like a classroom of people all speaking at the same time
but in different languages, so the messages are only heard by people
who speak that language.
AFH
 Adaptive frequency hopping reduces interference between
Bluetooth and other devices. 

Wireless Devices
 Transmission does not occur on channels that have significant
interference.

 Devices in the same frequency band and physical area detect

the presence of each other and adjust their communication
systems to reduce the amount of frequency overlap.
DSSS
 WLAN
 Data is divided into small pieces

Wireless Devices
 Each piece is allocated to a frequency channel on the
available spectrum
 Data is combined with a ‘chipping code’.
 Chipping code helps resist interference and allows for data
recovery.
DSSS V FHSS
 FHSS advantages:

Devices are usually cheaper

Wireless Devices


 Uses less power

 DSSS advantages

 Better performance
 More reliable transmission
REFERENCES
 Tanenbaum, A.S. & Weatherall, D.J. (2010). Computer
Networks, 5th edition. Pearson Education.
 Rysavy, P. (2002). Networking Standards and Wireless

Wireless Devices
Networks. Netmotion Wireless.
 IEEE website: http://grouper.ieee.org/groups/802/
 Bluetooth website: https://www.bluetooth.org
 IBM website: http://www.ibm.com