Scribd
Upload
4K views

Assembling Extension Cord

This document provides instructions for assembling an extension cord. It begins by defining the components of an extension cord, including the male plug, convenience outlet, and flat cord. It then describes common tools used like screwdrivers and pliers. The document outlines the steps to assemble an extension cord, which includes stripping and twisting wires, connecting them to the plug and outlet, and testing the completed cord. It concludes with a short quiz to test the reader's understanding of the key terms and components.

Uploaded by

Paul Bulanadi Badiang
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
4K views

Assembling Extension Cord

This document provides instructions for assembling an extension cord. It begins by defining the components of an extension cord, including the male plug, convenience outlet, and flat cord. It then describes common tools used like screwdrivers and pliers. The document outlines the steps to assemble an extension cord, which includes stripping and twisting wires, connecting them to the plug and outlet, and testing the completed cord. It concludes with a short quiz to test the reader's understanding of the key terms and components.

Uploaded by

Paul Bulanadi Badiang
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 14

Assembling

Extension Cord
Extension Cord

An extension cord is a span of flexible electrical power


cable with a plug on one end and multiple sockets on
the other end. It comes in several varieties to suit the
needs of the user.
MALE PLUG - a device inserted to a convenience outlet
to conduct electric current. A flat cord is attached to it on
one end and the other end is connected to a current
consuming instrument or appliance.
CONVENIENCE OUTLET - a device that acts as a
convenient source of electrical energy for current
consuming appliances. It is where the male plug of an
appliance is inserted and usually fastened on the wall or
connected in an extension cord.
FLAT CORD - Is a duplex stranded wire used for
temporary wiring installation and commonly used in
extension cord assembly.
SCREW DRIVERS - These tools are made of steel
hardened and tempered at the tip used to loosen or tighten
screws with slotted heads. They come in various sizes and
shapes.
Types:

Flat Screw Driver Philips Screw Driver Stubby Screw Driver


PLIERS - These made from metal with insulators in the
handle and are used for cutting, twisting, bending, holding,
and gripping wires and cables.
TYPES OF PLIERS

Combination Pliers (Lineman’s Pliers). This is used for


gripping, holding, and cutting electrical wires and cables
and even small nails. They are usually used by linemen in
doing heavy tasks.
TYPES OF PLIERS

Side Cutting Pliers - This type of pliers is used for


cutting fine, medium and big wires and cables.
TYPES OF PLIERS

Long Nose Pliers - This is used for cutting and holding


fine wires. This can reach tight space or small opening
where other pliers cannot reach and also used in making
terminal loops of copper wires.
STEPS:
1. Gather all necessary materials, tools and
equipment needed.
2. Split the cord wires and remove insulation of
both wires 1 centimeter long with an electrician
knife or a side cutting pliers. Be careful not to
cut any strand.
3. Scrape bare wire with the back of the knife until
shiny. Twist the wire stands.
4. Make a loop on terminal wires and connect the
wires to the terminal screw of the male plug.
The loop should go with the thread clockwise
direction.
5. Split the cord wires at the other end and then
follow procedure 2 and 3.
6. Open the convenience outlet then remove the
screw.
7. Make a loop on terminal wires and connect the
wires to the terminal screw of the convenience
outlet, tighten it and return the cover.
8. Check and test the extension cord by putting
the test bulb and plug in on a live outlet
Quiz:
IDENTIFICATION:
Directions: Identify the following items being ask is the sentence. Write the
answer on the spaced provided.
 
1. __________- a device that acts as a convenient source of electrical energy for
current consuming appliances. It is where the male plug of an appliance is
inserted and usually fastened on the wall or connected in an extension cord.
2. ­__________- a device inserted to a convenience outlet to conduct electric
current. A flat cord is attached to it on one end and the other end is connected
to a current consuming instrument or appliance.
3. __________- is a duplex stranded wire used for temporary wiring installation
and commonly used in extension cord assembly.
4. __________- tools made of steel hardened and tempered at the tip used to
loosen or tighten screws with slotted heads. They come in various sizes and
shapes.
5. __________- are made from metal with insulators in the handle and are used
for cutting, twisting, bending, holding, and gripping wires and cables.
 
ENUMERATION:
6-8 Essential materials needed for extension cord.
9-10 Give two kinds of Pliers
Answer Key:

1. Outlet
2. Male Plug
3. Flat Cord
4. Screw drivers
5. Pliers
6. Outlet
7. Male Plug
8. Flat Cord
9. Long Nose Pliers
10. Combination Pliers

You might also like