Scribd
Upload
67 views

ANSYS Workbench - Simulation Introduction: Training Manual

Uploaded by

Shamik Chowdhury
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
67 views

ANSYS Workbench - Simulation Introduction: Training Manual

Uploaded by

Shamik Chowdhury
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 4

Training Manual

1st Edition

ANSYS Workbench -
Simulation Introduction
Training Manual
ANSYS Workbench – Simulation Introduction

Inventory Number: 002265


1st Edition
ANSYS Release: 10.0
Published Date: August 26, 2005

Registered Trademarks:
ANSYS® is a registered trademark of SAS IP Inc.
All other product names mentioned in this manual are trademarks or registered trademarks of their respective
manufacturers.

Disclaimer Notice:
This document has been reviewed and approved in accordance with the ANSYS, Inc. Documentation Review
and Approval Procedures. “This ANSYS Inc. software product (the Program) and program documentation
(Documentation) are furnished by ANSYS, Inc. under an ANSYS Software License Agreement that contains
provisions concerning non-disclosure, copying, length and nature of use, warranties, disclaimers and
remedies, and other provisions. The Program and Documentation may be used or copied only in accordance
with the terms of that License Agreement.”

Copyright © 2005 SAS IP, Inc.

Proprietary data. Unauthorized use, distribution, or duplication is prohibited.

All Rights Reserved.


ANSYS Workbench – Simulation Introduction
Table of Contents Training Manual

1. Introduction 1-1 6. Thermal Analysis 6-1

ANSYS Workbench – Simulation


A. About ANSYS, Inc. 1-5 A. Geometry 6-6
B. ANSYS Workbench Overview 1-10 B. Assemblies – Solid Body Contact 6-9
C. Starting Simulation 1-20 C. Heat Loads 6-19
D. Solution Options 6-27
D. Workbench Projects 1-24
E. Results and Postprocessing 6-31
2. Simulation Basics 2-1 F. Workshop 6.1 – Steady State Thermal Analysis 6-36
A. Launching Simulation 2-3 G. Thermal Transient Setup 6-38
B. Startup Panel 2-13 H. Transient Settings 6-41
C. Basic Procedure 2-17 I. Transient Loads 6-46
D. Workshop 2 – Simulation Basics 2-42 J. Transient Results 6-48
K. Workshop 6.2 – Transient Thermal Analysis 6-51
3. General Preprocessing 3-1
A. Geometry Branch 3-5 7. Linear Buckling Analysis 7-1
B. Contact 3-14 A. Background on Buckling 7-3
C. Meshing 3-32 B. Buckling Analysis Procedure 7-8
D. Named Selections 3-58 C. Workshop 7 – Linear Buckling 7-21
E. Coordinate Systems 3-63
F. Workshop 3 – Mesh Control 3-66
8. Results Postprocessing 8-1
A. Viewing Results 8-3
4. Static Structural Analysis 4-1 B. Scoping Results 8-21
A. Geometry 4-4 C. Exporting Results 8-26
B. Assemblies – Solid Body Contact 4-9 D. Coordinates Systems 8-29
C. Loads and Supports 4-18 E. Solutions Combinations 8-31
D. Workshop 4.1 – Linear Structural Analysis 4-38 F. Stress Singularities 8-34
E. Solution Options 4-39 G. Error Estimation 8-37
F. Results and Postprocessing 4-43 H. Convergence 8-39
G. Workshop 4.2 – 2D vs 3D Analysis 4-56 I. Workshop 8 – Advanced Results Processing 8-49
5. Free Vibration Analysis 5-1 9. CAD & Parameters 9-1
A. Free Vibration Analysis Procedure 5-4 A. CAD Interoperability 9-3
B. Workshop 5.1 – Free Vibration 5-16 B. Multiple Design Studies 9-31
C. Free Vibration with Pre-Stress 5-17 C. DesignXplorer 9-39
D. Workshop 5.2 – Prestressed Modal 5-23 D. Parameter Manager 9-40
E. Workshop 9 – DesignXplorer Parameter Mgr. 9-47

August 26, 2005


Inventory #002265
TOC-3
ANSYS Workbench – Simulation Introduction
Table of Contents Training Manual

10. Harmonic Analysis 10-1

ANSYS Workbench – Simulation


A. Harmonic Analysis Procedure 10-7
B. Solving Harmonic Analyses 10-15
C. Damping Input 10-22
D. Request Harmonic Tool Results 10-28
E. Workshop 10 – Harmonic Analysis 10-37

August 26, 2005


Inventory #002265
TOC-4

You might also like