Scribd
Upload
105 views

Geotechnical Engineering: L. Sebastian Bryson University of Kentucky

Geotechnical engineering deals with soil, rock, groundwater, and their impact on infrastructure projects. It involves characterization of subsurface conditions, design of foundations and earth structures, and mitigation of geohazards. Typical tasks include laboratory and field testing, numerical modeling, construction oversight, and performance monitoring to ensure structures perform as intended. Proper geotechnical design is essential for dealing with challenges posed by subsurface conditions, such as unstable slopes, settlement, earthquakes, and groundwater issues.

Uploaded by

SB Carmz
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
105 views

Geotechnical Engineering: L. Sebastian Bryson University of Kentucky

Geotechnical engineering deals with soil, rock, groundwater, and their impact on infrastructure projects. It involves characterization of subsurface conditions, design of foundations and earth structures, and mitigation of geohazards. Typical tasks include laboratory and field testing, numerical modeling, construction oversight, and performance monitoring to ensure structures perform as intended. Proper geotechnical design is essential for dealing with challenges posed by subsurface conditions, such as unstable slopes, settlement, earthquakes, and groundwater issues.

Uploaded by

SB Carmz
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 52

Geotechnical Engineering

L. Sebastian Bryson
University of Kentucky
Introduction to Geotechnical Engineering
All Civil Engineering begins
with Geotechnical
Engineering

ground

2
Definitions
Soil mechanics is a discipline that applies the
principles of engineering mechanics to soils to
predict the mechanical behavior of soil.

Geotechnical Engineering is the branch of


civil engineering that deals with soil, rock, and
underground water, and their relation to the
design construction and operation of
engineering projects (Coduto 1998)
Typical Geotechnical Project
Geo-Laboratory soil properties Design Office
~ for testing ~ for design & analysis

ils
eta
d
soi

ign
l sa

s
de
mp
s le

construction site 4
Shallow Foundations
~ for transferring building loads to
underlying ground
~ mostly for firm soils or
light loads

firm
ground

6 bed rock
Foundation Systems
Designing of Shallow Foundations Systems –
Bearing Capacity Failure
Transcona Grain Elevator

(from Budhu 2000)


Foundation Systems
Designing of Shallow Foundation Systems – Differential
Settlement

Leaning Tower of Pisa


Deep Foundations
~ for transferring building
loads to underlying
ground
~ mostly for weak
P
soils or heavy loads I
L
E
weak soil

bed rock
10
Foundation Systems
Deep Foundation Systems: Driven Piles
Deep Foundations

Driven timber piles, Pacific Highway


12
Foundation Systems
Deep Foundation Systems: Drilled Shafts
~ Prevent soils from from spreading laterally

retaining
wall

Road
Train

14
Earth Pressure
and Retaining Walls
Reinforced Earth Walls

(The Reinforced Wall Company 2003)


Retaining Structure Systems
Gavions

(Gaviones LEMAC (2003)


Retaining Structure Systems
Tie-backs

(Boulanger and Duncan 2003)


18
Retaining Structure Systems
Excavation Support Systems
Sheet Piles
~ sheets of interlocking steel or timber driven into
the ground, forming a continuous sheet

warehouse

ship

sheet pile

20
Sheet Piles
~ resist lateral earth pressures
~ used in temporary works
~ used in excavations, waterfront structures

21
Sheet Pile Walls

(Boulanger and Duncan 2003)


~ sheet pile walls enclosing an area, to
prevent water seeping in

23
Tunneling

24
~ for impounding water

reservoir
clay
core shell

soil

25
Landslides

26
Earthworks
~ preparing the ground prior to construction

Roadwork, Pacific
Highway

27
Geofabrics
~ used for reinforcement, separation, filtration and
drainage in roads, retaining walls, embankments…

Geofabrics used on Pacific Highway 28


Geosynthetics
Geosynthetic stabilized walls

(kshitija.wordpress.com 2007) (Environmental Science & Engineering 2007)


Mechanically Stabilized Earth Walls
~ using geofabrics to strengthen the soil

30
Geoenvironmental Engineering
Characterization and remediation of Geo-
environmental hazards
MSW Landfill

(from Willmer 2001) (from Norwegian Geotechnical Institute 2001)


Waste Disposal in Landfills

32
~ to monitor the performances of earth and earth
supported structures
~ to measure loads, pressures, deformations,
strains

33
Vane Shear Test Standard Penetration Test
Cone Penetration Testing
Triaxial Test on Soil Sample in Laboratory
36
Geotechnical Engineering
Problems
How will the groundwater
conditions impact the
engineering project?
Teton Dam Failure (1975)
Geotechnical Engineering
Problems
What will be the
impact of
excavations, grading,
or filling?

Collapse of Nicoll
Highway,Singapore,
2004
Geotechnical Engineering
Problems
Are natural or proposed earth slope stable?

(from Norwegian Geotechnical


Institute, 2001)
Geotechnical Earthquake
Engineering
Effects of earthquakes
1964 Niigata Earthquake 1967 Caracas
Earthquake

(from Kramer – (from Alshibli 2001)


www.ce.washington.edu 1996)
Geotechnical Earthquake
Engineering
Effects of earthquakes
1995 Kobe Earthquake 1999 Chi Chi Earthquake

(Boulanger and Duncan 2006)


Impact Roller to Compact the Ground
44
Sheepsfoot Roller to Compact Clay Soils
45
Big weights dropped
from 25 m, compacting
the ground.

Craters formed in 46compaction


Soil Improvement
Stone Columns

(Boulanger and Duncan 2003)


Soil Improvement
Jet Grouting

(Boulanger and Duncan 2003)


Soil Improvement
Compaction Grouting

(Boulanger and Duncan 2003)


Soil Improvement
Chemical Injection

(Boulanger and Duncan 2003)


Thou shall not wait till the last minute
to involve Geotechnical Engineers.
51
Geotechnical Engineers – Work
Hard, Play Hard!
52

You might also like