ZXSDR BTS Structure and Principle

Agenda

 ZXSDR BTS Family Introduction

 ZXSDR BS8700
 ZXSDR BS8800
 ZXSDR BS8900
 ZXSDR BS8906
 ZXSDR BTS Work Principle
 ZXSDR BTS Operation and Maintenance
 Evolution of Multi-Mode BTS

Unified Radio Resource

G3 Multimode Management
BTS - SDR System conversion for
adjacent frequency software
Different BTS systems
Integrated BSC function
overlapped
TDM/ATM platform G2 Multimode Shared broadband multi-carrier module
MESH network Architecture
Narrowband architecture Shared uTCA BBU
BTS
Low integration and high Full-IP architecture and unified platform
Multi-system conversion for same frequency
G4 Multimode
consumption Different BTS Systems
Interchanged
software BTS - Flat SDR
Ultra-high integration and low consumption
G1 Multimode 3G BBU/RRU Interchangeable
IP/ATM architecture
BTS Increasing integration

Traditional macro-BTS, ATM

architecture, 12TRX cabinet ZTE macro-BTS, IP ZTE SDR, 36TRX cabinet
architecture, 18TRX cabinet
ZTE SDR Base Station Platform
 Multiple mode, multiple frequency  Separate baseband and radio
band, unified hardware platform  Radio unit based on MCPA
 Base band processing unit based
onμTCA structure

CDMA2000 WiMAX
GSM
WCDMA TD-SCDMA

SDR helps you to achieve:

Optimized frequency resource utilization Optimized network resource

Smooth innovation of wireless network Best networking solution for TCO

ATCA/mTCA

 ATCA (Advanced Telecommunication Computer Architecture):

adopted by PICMG in 2003
 Micro TCA (u TCA): ATCA, be fit for accessing network
Broadband MCPA
 Single-Carrier PA  Multi-Carrier PA

Combiner & Antenna Duplex & Antenna

（ f1~f6)
PA1 PA2
PA2 PA3
PA3 PA4 MCPA
f1 f2 f3 f4 （ f1~f6)
TRX1 TRX2 TRX3 TRX4 MTRX

Digital IF Process Digital IF Process

BBU BBU

Interface Interface

SDR design is based on MCPA at the same frequency;

MCPA provides flexible frequency optimization technology and better equipment integrity.
SDR Base Station Family

Distributed BTS BS8700, flexible

R8840 R8860 BS8700
B8200
+ =
networking, 0 space requirement and
rapid deployment , can be used for both
indoor and outdoor coverage
RSU40/RSU60 BS8906
Micro BTS BS8906, provide Low-cost

+ =
integrated solution for single-sector
cell.
B8200

RSU40/RSU60 BS8800
Indoor Marco BTS BS8800, can be

B8200
+ = installed in equipment room for indoor
coverage

RSU40/RSU60 BS8900
Outdoor Marco BTS BS8900, can be
installed in cabinet for outdoor

B8200
+ = coverage, it can adapt to various
environment
ZTE GSM/UMTS Dual-Mode SDR Family

ZTE SDR 4 Key Features

RRU
BBU
 MCPA-based broadband Radio
Unit with multi-mode supported.
 Sufficient output power of HPA
with lower power consumption.
 MicroTCA structure Base Band
Unit with high reliability and
easy expansion.
Outdoor
 High integrity & processing Macro
capability; upgrade to HSPA+ via
software; minimum upgrade cost Indoor Macro
to support LTE.
Agenda

 ZXSDR BTS Family Introduction

 ZXSDR BS8700
 ZXSDR BS8800
 ZXSDR BS8900
 ZXSDR BS8906
 ZXSDR BTS Work Principle
 ZXSDR BTS Operation and Maintenance
Hardware Architecture of BS8700

Antenna BS8700
BBU

BB
(uBPG) CPRI
FS R8860
RadioUnit
Radio Unit Fiber
E1(75 SA/
Ω/120Ω SE CC
) / T1
GE/FE RRU

Control Signaling
Clock
Data
=
R8840

+ R8860

B8200

The
The structure
structure of
of BS8700
BS8700 can
can express
express in
in the
the form
form of
of
BBU+RRU,
BBU+RRU, with
with Base
Base band
band and
and RF
RF modules
modules separated.
separated.
ZXSDR B8200 Introduction
 B8200 accomplishes the following basic functions
with RRU in Um/Uu, Abis/Iub and O&M interfaces.
 RRU and B8200 accomplishes UE access and radio link transmission
including RF processing, channel coding and decoding, channel
multiplexing and de-multiplexing, measuring and reporting, power
control, transmit diversity, receiving diversity, calibration and
synchronization.
 With Abis/Iub interface, RRU and B8200 connects with BSC/RNC and
accomplishes the following functions including cell management,
reporting BTS measurement information, broadcasting system
Information, implementing access control from BSC/RNC, mobility
management, radio resource management and controlling, FP
processing and transmission management.
 With operating and maintenance interface, B8200 provides system
management functions including configuration management, alarm
management, status checking and system monitoring
Base Band Unit - ZXSDR B8200
Performance Index
 GSM Processing Capability:
19 inch  60TRX (12TRX *5uBPGs )
 24 Cell / BBU
 UMTS Processing Capability:
2U
88.4mm  960CE/BBU(192CE/BPC*5)
 Throughput UL 75Mbps(15Mbps*5)
482.6mm  Throughput DL 216Mbps(43.2Mbps*5)
 30CS/BBU
Based on Unified MicroTCA Platform

Physical Index
Interface Index  Volume:
 88.4×482.6×197mm （ H×W×D ）
 Abis/Iub Interface:  Weight: 8.75kg (full configuration)
 16*E1/T1 ；  Typical Power Consumption :
 1*FE/GE Electric/Optical(8 VLAN)  GSM 60W/12TRX
 WCDMA 80W / 6CS
 To RRU: 12*1.25Gbps CPRI optical interface
 Power Supply: -48V DC
 Temperature Range: -20℃ ～ 55℃
 Humidity Range: 5% ～ 95%
PM Board Introduction
Power Module

Power Module
16 internal interface for +12V load power
16 internal interface for +3.3V management power
Measurement and protection of input over-voltage/under-

voltage;
Output over-current protection and load power management
PM Indicators
Board LED Color Meaning Description
Always on: The board is in reset state.
Running
RUN Green Flashing at 1Hz: The board is normally running.
Indicator
Off: Self test fails.
On: The board has an alarm.
Alarm Red Alarm Indicator
PM Off: The board has no alarm.
On: The board can be unplugged.
Plugging/Unplug Flashing: The board is being activated or
HS Blue
ging Indicator deactivated.
Off: The board cannot be unplugged.
SA/SE Board Introduction

Site Alarm Board

Site Alarm Board/Site Alarm Extender Board(optional)

Alarm monitor and rev control of no more than 9 fans;

Signal monitor and interface lightning protection for the rack;

Providing 6 input dry contact interfaces, 2 input /output dry contact interface;

Providing 8 lines of E1/T1 interface

 SA/SE Indicators
Board LED Color Meaning Description
Always on: The board is in reset state.
Running
RUN Green Flashing at 1Hz: The board is normally running.
Indicator
Off: Self test fails.
On: The board has an alarm.
Alarm Red Alarm Indicator
SA/SE Off: The board has no alarm.
On: The board can be unplugged.
Plugging/Unplug Flashing: The board is being activated or
HS Blue
ging Indicator deactivated.
Off: The board cannot be unplugged.
SA Jumpers
Jumper X5 is used to set E1/T1 transmission
mode.
TWO LSB POSITIONS OF X5
TWO LSB POSITIONS OF X5

TWO MSB
TWO MSB POSITIONS
POSITIONS OF
OF X5
X5
CC Board Introduction
Control & Clock Board

GPS system clock & RF reference clock;

Abis Iub interface function;

Ethernet switch function, providing switch plan for signaling and media stream;

Rack management
CC Indicators
Board LED Color Meaning Description
On: The board can be unplugged.
Plugging/Unpluggin
HS Blue Flashing: The board is being activated or deactivated.
g Indicator
Off: The board cannot be unplugged.
Always on: The board is in reset state.
RUN Green Running Indicator Flashing at 1Hz: The board is normally running.
Off: Self test fails.
On: The board has an alarm.
Alarm Red Alarm Indicator
Off: The board has no alarm.
Alternate flash for different links; the max 4 flashes per
CC second; flashing at frequency of 5 Hz.
The first second: one flash means Link 0 is normal and
OFF means Link 0 is not in use.
The third second: two flashes means Link 1 is normal
E1/T1 status and OFF means Link 1 is not in use.
E0S Green
indicator (link 0–3) The fifth second: three flashes means Link 2 is normal
and OFF means Link 2 is not in use.
The seventh second: four flashes means Link 3 is
normal.
and OFF means Link 3 is not in use.
Recycle. Each cycle lasts for eight seconds.
 CC Indicators
Board LED Color Meaning Description
E1/T1 status
E1S Green The same as E0S.
indicator (link 4–7)
E1/T1 status
E2S Green The same as E0S.
indicator (link 8–11)
E1/T1 status
E3S Green indicator (link 12– The same as E0S.
15)
Active/Standby On: The board is in active status
MS Green
status indicator Off: The board is in standby status

CC Always on: The antenna feeder is normal.

Always off: The antenna feeder and satellite are normal,

GPS antenna state in initialization state.
or 2 MHz state,
Slow Flash (flashing at 1 Hz)): The antenna feeder is
connection state of
REF Green broken.
SMA Interface on
corresponding Fast Flash (flashing at 2 Hz): The antenna feeder is
panel GPS normal but cannot receive satellite signal.
Slowest Flash (flashing at 0.5 Hz): Antenna short circuit
Quickest Flash (flashing at 5 Hz): No message is
received at the initialization stage.
 CC Indicators
Board LED Color Meaning Description
On: Physical link of Abis/iub network interface
Abis/Iub interface (optical or electrical) is normal.
ETH0 Green
link state Off: Physical link of Abis/Iub network interface is
broken.
Link state of On: Physical link of network interface is normal.
ETH1 Green ETH1 network
Off: Physical link of network interface is broken.
interface
FS Board Introduction
Fabric Switch Board

Fabric Switch Module

Baseband IQ data exchange;

Providing interface between RRU and BBU

FS Indicators
Board LED Color Meaning Description
Always on: The board is in reset state.
Running
RUN Green Flashing at 1Hz: The board is normally running.
Indicator
Off: Self test fails.
On: The board has an alarm.
Alarm Red Alarm Indicator
FS Off: The board has no alarm.
On: The board can be unplugged.
Plugging/Unplug Flashing: The board is being activated or
HS Blue
ging Indicator deactivated.
Off: The board cannot be unplugged.
Baseband Board Introduction
Baseband Board

Universal Baseband Processing Board for GSM

Baseband modulation, maximum processing capacity is 12 carriers;

Supporting baseband frequency hopping;

Supporting static and dynamic power control;

Baseband Processing Board Type C

maximum processing capacity is 6 carrier-sectors;

maximum CE for UL/DL is 192/192 CE;

maximum HSDPA throughput is 43.2Mbps

maximum HSUPA throughput is 15Mbps

UPBG Indicators
Board LED Color Meaning Description
Always on: The board is in reset state.
Running
RUN Green Flashing at 1Hz: The board is normally running.
Indicator
Off: Self test fails.
On: The board has an alarm.
Alarm Red Alarm Indicator
UPBG Off: The board has no alarm.
On: The board can be unplugged.
Plugging/Unplug Flashing: The board is being activated or
HS Blue
ging Indicator deactivated.
Off: The board cannot be unplugged.
Cable Connection of B8200
ZXSDR R8860 Introduction
 Support the configuration of 5MHz/4.8MHz/4.6MHz channel interval;
 Multi-carrier support: GSM up to 6 carriers, UMTS up to 4 carriers, GSM/UMTS dual
mode configuration;
 Multi-band support: 900M/1800MMHz
 Co-cabinet can support 4-antenna-receiving in 1 sector;
 Co-cabinet can support transmit diversity, without adding antenna achieving same
receiving sensitivity;
 Co-cabinet can support non-continuous frequency configuration;
 Support RTWP report interval at 100ms and 2ms;
 Support transmit power reporting function for every carrier;
 Support over loading protection function for power amplifier;
 Support measurement, compensation and adjustment function for channel delay;
 Support transmit channel switching on/off function;
 R8860 software fault for itself will not affect the running of BBU and other R8860
which connected to it.
Remote Radio Unit - ZXSDR R8860
Performance Index
 Carrier Configuration:
 Support GSM 1-6TRX or UMTS 1~4 CS
 Output Power ： 60W /80W
 Receive Sensitivity:

500mm
 GSM -113dBm@sigle antenna
 UMTS
-126.5dBm@sigle antenna
-129.2dBm@dual antenna
17
2m
m 320m
m  Frequency:
900MHz, 1800MHz, 850MHz, 1900MHz
SDR R8860

Physical Index
• 35 ％ power-efficient for GSM
 Volume(R8860): 500×320×172mm （ H×W×D ）
• 40% power-efficient for UMTS .  Weight: 22.5Kg
• Support GSM and UMTS.  Typical Power Consumption:200W (6TRX)(900M)
 Power Supply: -48V DC

Interface Index  Temperature Range:-40℃ ～ +55℃

 Protection Class:IP65
 2*1.25G CPRI Optical interface
Remote Radio Unit Interface
No Label Interface

BBU and RPU Interfaces / RRU

1 LC1
concatenation interface
BBU and RPU Interfaces / RRU
2 LC2
concatenation interface
3 AISG AISG device interface
4 Mon External device interface

5 DC IN Power interface

Interface to receive diversity RF

6 RX
cable
Interface to transmit / receive main
7 RX/TX
diversity RF cable
8 RXout Frequency expansion interface
9 RXin Frequency expansion interface

10 GND Machine Grounding

 RRU Indicators
Board LED Color Meaning Description
Always on: The board is in resetting or starting status.
Flashing at 1Hz: The board is normally running.
RUN Green Running Indicator
Flashing at 5Hz: The board is downloading version.
Off: Self test fails.
Flash in 5Hz: critical or severe alarm
Alarm Red Alarm Indicator Flash in 1Hz:normal or minor alarm
Off: The board has no alarm.

On: normal fiber connection

RRU
Off: disconnected fiber

Optical link Flash in 5Hz: consider this link as clock reference

Link Green
indicator source, and phase-locked loop in fast capture status

Flash in 0.25Hz: consider this link as clock reference

source, and phase-locked loop in trace status

RF working status Off: without RF out put

RF Orange
indicator On: with RF out put
Networking Topology of RRU

Chain Topology

Star Topology RRU

RRU B8200

STM-1
B8200

BSC

E1/T1

ZTE
ZTEprovides
providesflexible
flexiblenetworking
networkingfor
fordistributed
distributedsite
sitesuch
suchas
asstar,
star,
chain,
chain,loop
loopand
andmix
mixtopology
topologyto
tomeet
meetdemands
demandsforforcustomers.
customers.
Agenda

 ZXSDR BTS Family Introduction

 ZXSDR BS8700
 ZXSDR BS8800
 ZXSDR BS8900
 ZXSDR BS8906
 ZXSDR BTS Work Principle
 ZXSDR BTS Operation and Maintenance
ZXSDR BS8800 Introduction
 ZXSDR BS8800 (hereafter BS8800) is one of multi-carrier, multi-mode indoor
macro base station in ZXSDR BTS series.
 BS8800 accomplishes UE access and radio link transmission including RF
processing, channel coding and decoding, channel multiplexing and de-
multiplexing, measuring and reporting, power control, transmit diversity, receiving
diversity, calibration and synchronization.
 BS8800 connects with BSC/RNC and accomplishes the following functions
including cell management, reporting BTS measurement information, broadcasting
system Information, implementing access control from BSC/RNC, mobility
management, radio resource management and controlling, FP processing and
ATM transmission management.
 With operating and maintenance interface, BS8800 provides system management
functions including configuration management, alarm management, status
checking and system monitoring.
 BS8800 adopts standard 19 inches rack structure. The volume is main cabinet
dimension: 950mm * 600mm * 450mm (H*W*D), auxiliary cabinet dimension:
700mm * 600mm * 450mm (H*W*D).
Integrated Indoor Macro Site - ZXSDR BS8800
Radio Unit:
SDR BS8800
RSU40/RSU60 Performance
PerformanceIndex
Index
GSM Processing Capability:
GSM Processing Capability:
GSM: 60 TRX (12TRX * 5 BP boards
GSM: 60 TRX (12TRX * 5 BP boards
 24 Cell / BBU
 24 Cell / BBU
Radio Unit  UMTS Processing Capability:
 UMTS Processing Capability:
Uplink and Downlink: 960CE
Uplink and Downlink: 960CE
UMTS: 30CS (6CS * 5 BPC boards)
UMTS: 30CS (6CS * 5 BPC boards)
Receive Sensitivity:
Receive Sensitivity:
GSM -113dBm@single antenna
GSM -113dBm@single antenna
UMTS-126.5dBm@sigle antenna
Baseband B8200 UMTS-126.5dBm@sigle antenna
Unit UMTS-129.2dBm@dual antenna
UMTS-129.2dBm@dual antenna

Physical
PhysicalIndex
Index
Interface
InterfaceIndex
Index Volume: 950×600×450mm （ H×W×D ）
Iub Interface: Volume: 950×600×450mm （ H×W×D ）
Iub Interface:
(Main
(MainCabinet)
Cabinet)
8*E1/T1(Can expand to 16)
8*E1/T1(Can expand to 16)  Weight: 135kg (Main Cabinet)
 Weight: 135kg (Main Cabinet)
1*GE/FE Optical or 1*GE/FE Electrical
1*GE/FE Optical or 1*GE/FE Electrical  Typical Power Consumption S666:735W(RSU60)
 Typical Power Consumption S666:735W(RSU60)
To RRU: 12 *1.25Gbps CPRI Optical Interface
To RRU: 12 *1.25Gbps CPRI Optical Interface  Power Supply: -48V DC (-40~-57V DC)
 Power Supply: -48V DC (-40~-57V DC)
Radio Unit of BS8800
- RSU40/RSU60 Feeder Interface

 RSU40/RSU60 is an radio unit of BS8800 based on MCPA

technology. It consists of MCPA (multi-carrier power module)

CPRI optical to
module, transceiver module, and duplex filter LNA, and BBU, or connect
via SFP high-
connects antenna via TX/RX, RX port. speed cable
 Compact and light

RX expand
Numbe interface
Interface Interface Description
r
1 Power Power supply interface
2 AISG AISG device interface
3 Mon External device interface
4、5 Test 、 DBG Debug, test interface
Interface between BBU and
6 TX RX
RRU or RRU cascade
7 RXout 、 RXin Frequency expand interface
Main and diversity antenna
8 ANT
interface
RSU Modules Name in
BS8800/BS8900/BS8906

Mode RU Module TOC and other parameters

850MHz, TOC 80W

900MHz, TOC 80W

GSM/UMTS RSU60
1800MHz, TOC 80W

1900MHz, TOC 80W

37
 BS8800 Hardware Structure
 Radio Unit:
 RSU40,RSU60

 Wiring Duct:
 Used to walk wiring in rack, such

Radio Unit as fiber or SFP cable between BBU

and RSU.
Power  Power Distribution Module:
Distribution Module  Passive power distribution unit

 Transmission Device:
Wiring
950mm  1U slot, it can provide built-in
Duct
Fan transmission or microwave devices
Transmission
Device to save operators’ investment.
Ventilation
 Base Band Unit:
Base Band  2*B8200 can be placed in

maximum
 FAN
 Used to perform heat dissipation
450 mm for RSU modules, 6 fans in total
600mm

38
BS8800 - Easy to Stack, Easy to expand
Radio Unit

700mm Cable Chute

Power Distribution
Module
Ventilation
450 mm

Auxiliary Cabinet 600mm Fan 1650mm

Radio Unit

Cable Chute

950mm
Power Distribution
Module 950mm

Ventilation

450 mm Base Band Unit 450 mm

Main Cabinet 600mm

600mm
Easy
Easyto
tostack
stackand
andexpand,
expand,lower
lowerupgrade
upgradecost
costfor
forcustomers
customers
Agenda

 ZXSDR BTS Family Introduction

 ZXSDR BS8700
 ZXSDR BS8800
 ZXSDR BS8900
 ZXSDR BS8906
 ZXSDR BTS Work Principle
 ZXSDR BTS Operation and Maintenance
ZXSDR BS8900 Introduction
 ZXSDR BS8900 (hereafter BS8900) is one of multi-carrier, multi-mode outdoor
macro base station in ZXSDR BTS series.
 BS8900 accomplishes UE access and radio link transmission including RF
processing, channel coding and decoding, channel multiplexing and de-
multiplexing, measuring and reporting, power control, transmit diversity, receiving
diversity, calibration and synchronization.
 BS8900 connects with BSC/RNC and accomplishes the following functions
including cell management, reporting BTS measurement information, broadcasting
system Information, implementing access control from BSC/RNC, mobility
management, radio resource management and controlling, FP processing and
ATM transmission management.
 With operating and maintenance interface, BS8900 provides system management
functions including configuration management, alarm management, status
checking and system monitoring.
 BS8900 adopts standard 19 inches rack structure, is composed of outdoor RF
cabinets RC8910, RC8911, RC8931, site support cabinet BC8910, and battery
cabinet PC8910.
Integrated Outdoor Macro Site - ZXSDR
BS8900
Base Band Unit: SDR BS8900 Performance
PerformanceIndex
Index
B8200
GSM Processing Capability:
GSM Processing Capability:
GSM: 60 TRX (12TRX * 5 BP boards)
GSM: 60 TRX (12TRX * 5 BP boards)
 24 Cell / BBU
 24 Cell / BBU
 UMTS Processing Capability:
 UMTS Processing Capability:
Uplink and Downlink: 960CE
Uplink and Downlink: 960CE
UMTS: 30CS (6CS * 5 BPC boards)
UMTS: 30CS (6CS * 5 BPC boards)
Receive Sensitivity:
Receive Sensitivity:
GSM -113dBm@single antenna
GSM -113dBm@single antenna
UMTS-126.5dBm@sigle antenna
UMTS-126.5dBm@sigle antenna
UMTS-129.2dBm@dual antenna
UMTS-129.2dBm@dual antenna
Radio Unit:
RSU40/RSU60
Physical
PhysicalIndex
Index
Interface
InterfaceIndex
Index  Volume: 1900×600×600mm （ H×W×D ）
 Volume: 1900×600×600mm （ H×W×D ）
 Iub interface: (Standard
 Iub interface: (StandardConfiguration)
Configuration)
8*E1/T1(Can expand to 16)  Weight: 220kg ( with 3RSU)
8*E1/T1(Can expand to 16)  Weight: 220kg ( with 3RSU)
1*GE Optical or 1*GE/FE Electrical  Typical Power Consumption:S666:725W(RSU60)
1*GE Optical or 1*GE/FE Electrical  Typical Power Consumption:S666:725W(RSU60)
 To RRU: 12 *1.25Gbps CPRI Optical interface  Power Supply: -48V DC(-40VDC ~ -57VDC)
 To RRU: 12 *1.25Gbps CPRI Optical interface  Power Supply: -48V DC(-40VDC ~ -57VDC)
SDR BS8900 Hardware Structure
Heat Exchanger  Radio Unit:
 RSU40,RSU60
Transmission  6*RU can be supported in maximum
Device
Lightning  Power Distribution Module:
protection box  Passive power distribution unit
Base Band Unit
 Heat Exchanger:
Cable rack
 Perform heat dissipation for base band,
AC/DC Unit power and transmission unit
Transmission Device:
FAN
 7U slot with DC power supply, it can provide
PDM Battery built-in transmission or microwave devices
to save operators’ investment, 4U slot with
AC power supply
Radio Unit
 Base Band Unit:
 B8200
 AC /DC Unit(B121):
 Provide -48V DC power for BS8900, it
contains monitor unit and rectifier unit
 Battery Cabinet:
 the nominal capacity of the built-in batteries
is 300Ah

43
Cabinet Appearance
supporting cabinet + battery cabinet and radio cabinet

RC8910 RC8911
Radio Cabinet Radio Cabinet

RC8931
Radio Cabinet Outdoor Radio Cabinets

BC8910
Power & Battery Cabinets Supporting
PC8910 cabinet
Battery Cabinet
BC8910 Structure
AC Supply
AC Supply DC Supply
DC Supply

Heat Exchange 4U Heat Exchange 4U

Reserve Max. 6U Reserve 6U/7U

BBU 2U BBU 2U

AC Power 6U Lighting box 1U/2U

Wiring Duct 1U

PDM 3U
RC8911&RC8910 Structure
RC8911
RC8911 RC8910
RC8910

Fan subrack
Fan subrack

PDM PDM

RU RU

Storage battery Breaker

and surge arrester

Base Base
RC8931&PC8910 Structure
RC8931
RC8931

Fan subrack
PC8910
PC8910

PDM
RU

Storage battery

Storage battery

Base

Base
AC Configuration:BC8910+RC8911+RC8931
BC8910
Site support cabinet BC8910: used to
Outdoor RF cabinet RC8931: accommodate power system, baseband pool unit,
used to accommodate RF unit heat exchanger, and transmission device.
and battery. RC8931
Heat
Fan
Exchanger
subrack
6U reserved
space
PDM
BBU
RU B121

Fan
subrack
Storage
battery

Storage PDM
battery

RC8911 RU

Outdoor RF cabinet RC8911: used to accommodate RF unit and battery.

 AC
Configuration:BC8910+RC8910+RC8911+PC8910
Heat
Exchanger

6U reserved
BC8910 space
BBU
Storage
battery B121

Fan Fan
subrack subrack

PDM
PDM

RU
RU

RC8911 PC8910 RC8910

Storage
Outdoor RF cabinet RC8910: battery Outdoor RF cabinet PC8910:
used to accommodate RF unit. used to accommodate battery.
AC Configuration:BC8910+PC8910+RRU
Heat
Exchanger

6U reserved
space
BC8910
BBU
R8860

B121

Storage
PC8910 battery
DC Standard Configuration:BC8910+nRC8910
n=1~3

Heat
BC8910 Exchanger

BBU

Fan
subrack

PDM

RU

RC8910
Multi-form, Minimal Requirement for Site Condition
2 Place cabinets side by side
1 High Integration
 Same size, volume and space for

all cabinets
 Built-in transmission,
 Suitable for these scenarios such as
battery, power supply
ground-bearer or limited height

 Maximal 8-hours 3 Compact Configuration

power supply in full

configuration

4 RRU Remote Application

 Power and battery are optional
based on different conditions.

 RRU makes RF as close to

antenna as possible, minimizing
feeder loss.  Compact  No Power cabinet

52
Agenda

 ZXSDR BTS Family Introduction

 ZXSDR BS8700
 ZXSDR BS8800
 ZXSDR BS8900
 ZXSDR BS8906
 ZXSDR BTS Work Principle
 ZXSDR BTS Operation and Maintenance
ZXSDR BS8906 Introduction
 ZXSDR BS8906 (hereafter BS8906) is one of multi-carrier, multi-mode outdoor
micro base station in ZXSDR BTS series.
 BS8906 accomplishes UE access and radio link transmission including RF
processing, channel coding and decoding, channel multiplexing and de-
multiplexing, measuring and reporting, power control, transmit diversity, receiving
diversity, calibration and synchronization.
 BS8906 connects with BSC/RNC and accomplishes the following functions
including cell management, reporting BTS measurement information, broadcasting
system Information, implementing access control from BSC/RNC, mobility
management, radio resource management and controlling, FP processing and
ATM transmission management.
 With operating and maintenance interface, BS8906 provides system management
functions including configuration management, alarm management, status
checking and system monitoring.
 The BS8906 consists of BBU, RSU, FCE, PSU, APM\DPM, LPU\SDH\microwave
IDU and so on.
Integrated Micro Site - ZXSDR BS8906
BS8906 can be connected with RRU
SDR BS8906
Radio Unit: for outdoor BBU solution.
RSU40/RSU60
Performance
PerformanceIndex
Index
Processing Capability:
Processing Capability:
GSM: 6TRX,UMTS 4CS
GSM: 6TRX,UMTS 4CS
 Base Band Processing Capability:
 Base Band Processing Capability:
Same as B8200
Same as B8200
Receive Sensitivity:
Receive Sensitivity:
B8200 GSM -113 dBm@sigle antenna
GSM -113 dBm@sigle antenna
UMTS-126.5dBm@sigle antenna
UMTS-126.5dBm@sigle antenna
Frequency
Frequency
 900MHz, 1800MHz, 850MHz, 1900MHz
 900MHz, 1800MHz, 850MHz, 1900MHz

Interface
InterfaceIndex
Index Physical
PhysicalIndex
Index
Iub Interface: Volume: 600 × 320 × 480 mm （ H×W×D ）
Iub Interface: Volume: 600 × 320 × 480 mm （ H×W×D ）
8*E1/T1(Can expand to 16)  Weight: 52kg
8*E1/T1(Can expand to 16)  Weight: 52kg
1*GE/FE Optical or 1*GE/FE Electrical  Typical Power Consumption S4: 300W (RSU60)
1*GE/FE Optical or 1*GE/FE Electrical  Typical Power Consumption S4: 300W (RSU60)
To RRU: 12 *1.25Gbps CPRI Optical Interface  Power Supply: -48V DC (-40~-57V DC)
To RRU: 12 *1.25Gbps CPRI Optical Interface  Power Supply: -48V DC (-40~-57V DC)
  RSU subrack:
BS8906 Structure 
 RSU40,RSU60

BBU subrack:
 1*B8200 can be placed in
FCE maximum.
RSU subrack  FCE:
 Detects the external and internal

environment temperature in real

time.
LPU/IDU/SDH
 Implement power supply allocation,

speed adjustment, status

monitoring, and control on the on-
off status of the heaters.
APM+PSU/DPM  Base Band Unit:
 2*B8200 can be placed in

maximum
 APM+PSU/DPM
 DPM (DC Protection Module)

 APM (AC Protection Module)&

BBU
PSU (Power System Unit)
BBU subrack  LPU/IDU/SDH
 Line Lighting Protection Unit

 SDH/Microwave IDU
Agenda

 ZXSDR BTS Family Introduction

 ZXSDR BS8700
 ZXSDR BS8800
 ZXSDR BS8900
 ZXSDR BS8906
 ZXSDR BTS Work Principle
 ZXSDR BTS Operation and Maintenance
Hardware Architecture
 BBU performs Abis/Iub interface functions, signaling processing,baseband
processing, remote and local O&M functions, working status monitoring, and
alarm functions.
 RRU performs terminal access and RF link transmission function through
Um/Uu interface.
GPS antenna

BBU
GE CC
FAM FS GE
IQ switching Abis/Iub
switching
Clock SA
IQ E1/T1
PM GE

GE/FE BSC/RNC
UBPG / BPC

Fiber

RRU
Software Architecture
G SM Function UMTS Function

SCS OAM DBS BRS BRACS

LMT
NOP

OSS

Sche. Timer Moni. CPP Excep Mem BBX File DBG

OMC -B
VOS

VxWorks
Windows
Hardware (BSP)
Software Architecture
 The operating support layer provides the functions of OSS, OAM, DBS, BRS, BRACS, and
SCS to serve to different BTS mode.
 OAM (Operating and Maintenance) is to provide the configuration, alarm and

performance measurement function.

 DBS (Data Base Sub-system) is the database system.

 BRS (Barrier Sub-system) is for protocol stack processing.

 BRACS (Barrier Access Control Sub-system) is to control the access to bear layer.

 SCS (System Control Sub-system) is to control the power supplying and

active/standby switching.
 OSS (Operation Support Sub-system) is the support layer in this entire framework, which
is a hardware irrespective platform for running software and provides basic functions like
scheduling, timer, memory management, communication, sequencing control, monitoring,
alarming and logging. Detects the external and internal environment temperature in real
time.
 BSP (Board Support Package) supports the information routing to the GSM and public
parts in the application layer.
 VxWorks is the operation platform communication to the hardware components.
Agenda

 ZXSDR BTS Family Introduction

 ZXSDR BS8700
 ZXSDR BS8800
 ZXSDR BS8900
 ZXSDR BS8906
 ZXSDR BTS Work Principle
 ZXSDR BTS Operation and Maintenance
Maintenance Networking
NMS/BSS/OSS Local Client
Remote
Client
Local LAN/WAN LMT
M31 M31

LAN
R

RAN CN

Local client
LMT LMT
WAN

Remote R R

LAN

RAN CN
Remote client Remote client
LMT
LMT (via internet) Internet
 Maintenance Functions
NMS/OSS/
BSS 3rd Party
NMS/OSS/BSS
Northbound
Interface

EMS CORBA SNMP FILE ASCII DB

FM/PM/CM/IM FM FM/PM/CM/IM FM FM/PM/CM/IM

Fault Performance Configuration

NetNumen TM
M31 Management Management Management

Log Security
Management Management

Version System Topology

Management Management Management
Southbound
Interface

NE

FM PM CM IM SM FM PM CM IM SM
NE (RAN) NE (CN)
Maintenance Functions
 The BSS provides a transparent channel to implement operation and maintenance
information interaction between NetNumen M31 and the BTS. Management of the BSC
and the BTS adopts unified client interface for unified security management and operation
log. And it has a unified service management interface. NetNumen M31 also supports
CORBA/SNMP Itf-N interface to be integrated with third-part NMS.

Version Management
Version Management

 With this function, users can check the versions of the software and hardware running at
the foreground. The background provides a software downloading system for software
upgrade at the foreground. Before downloading, warehousing processing is required, that
is, copying the version file to the server and registering to the server.

Fault Management
Fault Management

 With this function, users can check the versions of the software and hardware running at
the foreground. The background provides a software downloading system for software
upgrade at the foreground. Before downloading, warehousing processing is required, that
is, copying the version file to the server and registering to the server.
Maintenance Functions
Configuration Management
Configuration Management

 Configuration management implements equipment configuration and radio configuration.

Performance Management
Performance Management

 Performance management is to measure, report and make statistics of the System

performances.

Log Management
Log Management

 Any operation performed by an operator is recorded automatically by the system. Thus,

the operation maintenance personnel can query historical operation records in some
special cases (such as abnormal system operations).

Security Management
Security Management

 Security management is implemented through user management and user group

management. The user element includes the user name and password, as well as which
user groups the user belongs to. The user group element includes the user group name
and authority information.