Engineering Drawing & Graphics

Lecture 01

ME-104 Introduction to CAD and CAM 3T (3, 0)

By

Engr. Muhammad Arsalan Khan

12/18/2020 1
 About Me
Engr. Muhammad Arsalan Khan
• Lecturer, MED UET Peshawar
(Office at MED )

• PhD (I.P) –Mechanical Engineering ( Energy )

(University of Engineering & Technology Peshawar , Pakistan-2019)

• MSc –Mechanical Engineering ( Material Engg. )

(University of Engineering & Technology Peshawar , Pakistan-2018)

• BSc -Mechanical Engineering

(University of Engineering & Technology Peshawar , Pakistan -2013)

12/18/2020
[email protected] 2
 Goals for Today
3

1. To find about the structure & policies of

this course

2. To develop basic concept about the

Drawing and graphics

12/18/2020
 Communications
4

Check your e-mail / groups / google

classroom often for announcements
related to the course

12/18/2020
 Reading Assignments
5

 Please make sure to read the assigned material for

each week before the commencement of the
corresponding week

 Reading that material beforehand will help you

greatly in absorbing with ease the matter discussed
during the lecture

12/18/2020
 Marks Distribution
6

 Assignments 15%
 Quizzes 10%
 Class Participation + -
 Mid Term Paper 25 %
 Final Term 50 %

12/18/2020
 Assignments (15%)
7

 Late homework policy: Late submission of assignments

will result in “zero” marks
 Assignments are to be submitted to CR before last date
and he will submit them to me on Last date.
 Done on an individual basis
 Collaboration is fine, but it should be you alone who
writes up the answers.

12/18/2020
 Quizzes (10%)

Quiz may be announced or may be surprise.

12/18/2020 8
 Mid term Exam
9

 After 8th week

 Duration: Two hours
 Will cover all material covered during the first 8
weeks

12/18/2020
 Final Exam
10

 After 16th week

 Will cover the whole course before and after

midterm
 Duration: - three hours

12/18/2020
Recommended Books
• Elementary Engineering Drawing, Revised and Enlarged
Edition by N. D. Bhatt.

• First Year Engineering Drawing by A.C Parkinson.

• Introduction to AutoCAD 2009 2D and 3D Design First

edition Alf Yarwood

• Illustrated AutoCAD by T. W. Berghauser and P. L. Sclive

• Other latest books/online resources covering the course

content.
12/18/2020 11
Course Outline:
 Manual 12 Drawing:

Engineering drawing fundamentals, types of lines and usage,

dimensioning, lettering, sheet planning, orthogonal projections, 1st
angle projection, 3rd angle project, isometric view, auxiliary views,
sectional view.
 AutoCAD :

CAD/CAM tools, vector and raster data, using AutoCAD as 2D drafting

tool, coordinate systems, drawing scale and viewing magnification,
drawing primitives e.g. LINE, ARC, CIRCLE, TEXT, geometric
transformations e.g. MOVE, COPY, SCALE, ARRAY, editing e.g. ERASE,
TRIM, EXTEND, FILLET, CHAMFER, STRETCH, using snap and object snap
facilities, creating and using symbols, layers, hatching, multiple line
types and colors, dimensioning, paper view, sectional drawing and
assembly drawing, printing and plotting drawings.12/18/2020
Introduction

1. INTRODUCTIOIN TO ENGINEERING DRAWING:

A language of Engineers to describe
a. Shape
b. Size / Dimensions
c. Fit
d. Finish
e. Production Process and Specification
f. Function
g. Assembly

12/18/2020 13
 Types of Drawings
Detail Drawings
To describe the shape, size, fit and finish of each and every part
in detail for production purposes.
Sub-Assembly Drawings
To describe the fit and method of fastening for a small group of
components to create an assembly.
Assembly Drawings
To describe the fit and method of fastening for a group of sub-
assemblies to create a larger assembly.

12/18/2020 14
 Types of Measuring Systems

• English
Feet and Inches

• Metric
Meters and Millimeters

12/18/2020 15
 Drawing Instruments And Their Uses

a. Drawing Board
Serves as a flat drawing surface to attach a paper to.

b. Drafting Media

• Paper
• Film (Tracing Paper)

12/18/2020 16
 Sizes of Papers:

Standard Sizes are:

USA size, inches International size, mm

A (8.5 x 11.0) A4 (210 x 297)
B (11.0 x 17.0) A3 (297 x 420)
C (17.0 x 22.0) A2 (420 x 594)
D (22.0 x 34.0) A1 (594 x 841)
E (34.0 x 44.0) A0 (841 x 1189)

12/18/2020 17
DRAWING INSTUMENTS AND THEIR USES

c. Pencils
Classification according to lead hardness is:

Hard grades Medium grades Soft grades

9H Hardest 3H Hardest 2B Hardest
8H 2H A3 (297 x 420) 3B
7H H A2 (420 x 594) 4B
6H F A1 (594 x 841) 5B
5H HB A0 (841 x 1189 6B
4H Softest B Softest 7B Softest

12/18/2020 18
 Drawing Instruments and their uses

d. Eraser
Soft type

e. T Square
For drawing horizontal lines and provide a
supporting/sliding edge for set-squares and other
stencils.

f. Set-Squares
For drawing vertical and angular lines

12/18/2020 19
 Drawing instruments and their uses

g. Scales
i. Linear scales (English and Metric)
ii. Cardboard scales (For reducing and increasing size)
iii. Diagonal scales (For measuring fractions)
iv. Protractor (For measurement of angles)

12/18/2020 20
 Drawing Instruments and their uses

h. Compass with Extender

For drawing circles and circular arcs

i. Divider
For transferring measurements and for dividing lines
into and number of equal parts

12/18/2020 21
 Types of Lines used in Engineering Drawing:

a) Visible Outline
For showing visible edges of an object
0.35 mm to 0.5 mm thick

b) Hidden Outline
For showing hidden edges of an object
0.25 mm to 0.35 mm thick

2 to 2.5 mm 1 to 1.5 mm

c) Center Line
For locating center of circles, arc and ellipses relative to the object.
0.13 mm to 0.2 mm thick

15 to 20 mm 2 to 2.5 mm 1 to 1.5 mm

d) Cutting Plane Line

To show the location of the imaginary secion plane in the reference view.
0.5 mm to 0.7 mm thick

15 to 20 mm 2 to 2.5 mm
1 to 1.5 mm

12/18/2020 22
 Types of Lines used in Engineering Drawing:

e) Phantom Line
For showing alternate position and/or adjacent part.
0.13 mm to 0.2 mm thick

15 to 20 mm 2 to 2.5 mm
1 to 1.5 mm

f) Extension Lines, Dimension Lines and Terminators

For extension of edges and placement of dimensions.
Terminator
73 0.25 to 0.35 mm thick
2 to 2.5 mm long
Extension Line
0.18 to 0.25 mm thick Dimension line
0.18 to 0.25 mm thick

g) Short Break Line

For showing short breaks
0.35 mm to 0.5 mm thick

h) Long Break Line

To show long breaks
0.13 mm to 0.2 mm thick

0.35 to 0.5 mm thick

i) Section Lines
A pattern of thin lines 0.2 to 0.25 mm thick. The pattern and thickness is
12/18/2020 dependent on the material. 23
Types of Lines used in Engineering Drawing:

12/18/2020 24
Types of Lines used in Engineering Drawing:

12/18/2020 25
Types of Lines used in Engineering Drawing:

12/18/2020 26
Types of Lines used in Engineering Drawing:

12/18/2020 27
Please have a look

Video 1: https://www.youtube.com/watch?v=z4xZmBpXIzQ
Video 2: https://www.youtube.com/watch?v=JVw5lIl7dCE

12/18/2020 28
 Task to do till next class.

Chapter 1 (Read topics covered in lecture)

12/18/2020 29
 Questions

12/18/2020 30