Boiler D' Type: Team Grouping
Boiler D' Type: Team Grouping
TEAM GROUPING
FARIZAL AMIN
AMERRUL ZAIDI
FADZLI
HANAFI
DIAGRAM BOILER SYSTEM
BOILER ‘D’ TYPE
The 'D Type' is the most common type of small
to medium sized boilers.
It is used in both stationary and marine
applications.
It consists of a large steam drum vertically
connected to a smaller water drum multiple
steam generating tubes.
These are surrounded by walls made up of
larger water-filled tubes, which make up the
furnace.
PICTURES OF BOILER ‘D’ TYPE
SYSTEM AND
DIAGRAM BOILER SYSTEM
Boiler D type using
water tube system.
Condition D type
boiler system is easy
and simple to operate.
This boiler D type
using by marine.
The design for boiler
D type is simple and
smaller.
OPERATING BOILER WATER TUBE
A Water tube boiler is a type of boiler in which water
circulates in tubes which are heated externally by the
fire.
Water-tube boilers are used for high-pressure boilers.
Fuel is burned inside the furnace creating hot gas
which heats up water in the steam-generating tubes.
In a smaller boilers, additional generating tubes are
separate in the furnace.
The larger utility boilers on the water filled tubes that
make up the walls of the furnace to generate steam.
Pictures the water tube
STEAM DRUM
The heated water from water tube then rises into
the steam drum.
saturated steam is drawn off the top of the drum.
the steam will reenter the furnace through a super
heater to become superheated.
superheated steam is defined as steam that is
heated above the boiling point at a given pressure.
, Superheated steam is a dry gas and therefore
used to drive turbines, since water droplets can
severely damage turbine blades
PICTURE STEAM DRUM
THE END