Scribd
Upload
36 views

Presentation Part 2a Simulation Over Time

The document discusses simulating a water distribution network over time using Epanet. Epanet allows simulating constant flow networks, but to analyze behaviors over longer time periods with different flows, time patterns must be created. This includes patterns for water demand at junctions and pump run times. The example creates 2-hour demand patterns and a pump pattern that runs for 6 hours daily. Running the simulation reveals the tank is overfilled/empty at times, so the tank size is increased or pump pattern changed to address this. Various reports and graphs can analyze pressures, demands, and other elements over the simulation period.

Uploaded by

deerws anaparthi
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
36 views

Presentation Part 2a Simulation Over Time

The document discusses simulating a water distribution network over time using Epanet. Epanet allows simulating constant flow networks, but to analyze behaviors over longer time periods with different flows, time patterns must be created. This includes patterns for water demand at junctions and pump run times. The example creates 2-hour demand patterns and a pump pattern that runs for 6 hours daily. Running the simulation reveals the tank is overfilled/empty at times, so the tank size is increased or pump pattern changed to address this. Various reports and graphs can analyze pressures, demands, and other elements over the simulation period.

Uploaded by

deerws anaparthi
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 23

Module Epanet

Develop a simulation over time


with Epanet
Develop a simulation over time with Epanet

The network previously developed was simulated in a single time period. The demand and the pump behavior
was considered as constant over time. A rather unrealistic situation!

In reality, the demand varies during the day (i.e. with peak’s demand in the morning between 6 and 12 and
afternoon from 18 to 22) and the pump doesn’t work 24 hours / day.
I.e. demand patterns
demand

average

hours
Simulation over a time

•Epanet allows simulation of constant flow, only

•Therefore, a simulation over longer time with different constant flows allows to
analyse different behaviours of the same network.

•For this purpose we have to create time patterns.


Patterns for the water demand at the junctions
Patterns for the pump’s running times
Simulation over a time
For our demand example, a 2 hours long pattern is used (24hr / 2 = 12 hrs period time. With this chosen pattern you
can modify the behaviors max 12 times during the day.
demand

average

time
Simulation over a time
Open with Epanet your previous exercise and save it with a
different name, i.e. example time analysis.

CAS WASH Module Epanet


Simulation over a time
Select Options - Times from Data Browser -> Edit
Simulation over a time

Write 2 for the value of “Pattern Time Step”

This means, that every 2 hours the behaviour can change.


Simulation over a time
Write 72 (hours, 3 days) in “Total
Duration” field. This will be the period
length of the simulation.
Simulation over a time
The Pattern Editor will appear, with per default pattern ID 1.
Develop the time pattern You can add a description (optional)
1. Select in the Browser /
Patterns and add a new
pattern
Simulation over a time
You will add the multiplier of the water demand in function of the estimated behaviour

Average of pattern must be „1“ or 100%

10
Simulation over a time
For each junction where there is a demand you must specify the pattern J1, J2, J3 and J5

Bulk editing: Edit-> group Edit -> Junction


Simulation over a time
Pattern for the pumping time
We assume that the pump pumps once every day for 6 hours. It starts at 8.00 and stops at 14.00.
Add a second Pattern for the pump (Pattern 2)

Average must not be 1 like the demand


Simulation over a time

Insert the pattern n° at the pump parameter


Simulation over a time

Solar pump would have a completely different patter


Typical pattern for solar pumps

Water supply during the driest season?


Daily supply >= daily demand?
Need for hybrid system?
Simulation over a time

Run the analysis

OK to see the error

See Epanet Manual page 37 for error message


Simulation over a time
Look at the graph for the tank T1 clicking
Simulation over a time

Evidentely, the tank is overfilled at 10.00 and 32.00 hr is empty

In this case, either you make a bigger tank or or change the pump Pattern.

CAS WASH Module Epanet


Simulation over a time

A) Make the tank bigger (Hmax 2.2m Volume 27.6m3)


Simulation over a time
B) Change the pattern of the pump

For every change, change the name of the file and write down the type of change
Simulation over a time

Each element of the network can be analized over time, grafically or with report/tables

Pressure behaviour at Junctions Demand behaviour at Junctions

CAS WASH Module Epanet


Simulation over a time
Full report

Table report
Simulation over a time
Note:

Valves are not installed in this


example.
Valves need to be installed between two
Junctions
Epanet considers 6 types of valves:

•PRVPressure Reducing Valve


•PSV Pressure Sustaining Valve
•PBVPressure Breaker valve
•FCVFlow Control Valve
•TCVThrottle Control Valves
•GPV General Purpose Valve

For setting and info about the use and


parameters of valves, see Epanet user
manual

Flow control valve are included in the


parameter of the pipes
Avoid valves in developing context due to their high cost and difficulty in obtaining spares
Thank you – Any
questions?

You might also like