Scribd
Upload
28 views

BY-Rajesh Kumar Dwivedi 2008AMD3100

Filament winding is a fabrication technique for forming reinforced plastic parts of high strength and light weight. It involves the precision high-speed positioning of continuous fiber in a predetermined pattern around a mandrel, which is then cured. After curing the mandrel is removed leaving a hollow composite structure. The process allows for both circular and rectangular winding patterns. Resins like epoxy, polyester, phenolic and silicone can be used with fibers like glass, carbon and Kevlar.

Uploaded by

Mudzakkir Dioktyanto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
28 views

BY-Rajesh Kumar Dwivedi 2008AMD3100

Filament winding is a fabrication technique for forming reinforced plastic parts of high strength and light weight. It involves the precision high-speed positioning of continuous fiber in a predetermined pattern around a mandrel, which is then cured. After curing the mandrel is removed leaving a hollow composite structure. The process allows for both circular and rectangular winding patterns. Resins like epoxy, polyester, phenolic and silicone can be used with fibers like glass, carbon and Kevlar.

Uploaded by

Mudzakkir Dioktyanto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 11

BY-

RAJESH KUMAR DWIVEDI


2008AMD3100
Filament winding is a fabrication technique for
forming reinforced plastic parts of high
strength and light weight.
The use of circumferential wrapping to
increase the bursting strength.
 Precision high-speed positioning of continuous
fiber in a pre-determined pattern is the basis of
the filament winding process .
 In this there is a mandrel that the fiber and
resin wound upon, is cured in room temp or in
oven. After cure mandrel is removed leaving a
hallow composite structure.
1. circular type
2. rectangular type
 Circumferential winding
 Helical winding
Curing-
Polymerization of composites on mandrel.

Pressure chambers-
System also requires pressure in addition to heat.
 Epoxy resins
 Polyester resins
 Phenolic resins
 Silicone resins
 Fabrication variables
 Processing variables
 Winding variables
 Material's variables
 Environmental variables
weathering
humidity
Advantages –
1. a very fast and economic method

2. Structural properties of laminates can be very


good
Limitation –
1. Lack of ductility

2. Low modulus of elasticity


 Storage tank
 Railway tank car
 Pipe
 Aerospace
Thank u….

You might also like