CHAPTER 4

Sound
OVERVIEW
 Introduction to sound.
 Multimedia system sound.

 Digital audio.

 MIDI audio.

 Audio file formats.

 MIDI versus digital audio.

 Adding sound to multimedia project.

 Professional sound.

 Production tips.
INTRODUCTION TO SOUND
 Sound is the best way to attract attention.
 Often audio provides the only effective way to convey an
idea, elicit an emotion, or dramatize point.
 Sounds also can be combined in a multimedia presentation
to provide information and enhance the other media being
presented.
 Why sound important
 To set the mood
 To catch the interest of the audience
 To alert the audience
 To include narration: effective for training and educational
application.
(CONT.) INTRODUCTION TO SOUND
 How is sound produced

 Vibrations in the air create waves of pressure that are perceived

as sound. These vibrations are passed on from one air molecule
to another and eventually reach our ears. Our ears then relay the
vibrations to out brain, which processes them, and thus we hear
sound.
(CONT.) INTRODUCTION TO SOUND
 Sound waves vary in sound pressure level (amplitude)
and in frequency or pitch.
 ‘Acoustics’ is the branch of physics that studies sound.

 Sound pressure levels (loudness or volume) are

measured in decibels (dB).
MULTIMEDIA SYSTEM SOUND
 System sounds are assigned to various system events
such as startup and warnings, among others.
 Macintosh provides several system sound options such
as glass, indigo, laugh.
 In Windows, available system sounds include start.wav,
chimes.wav, and chord.wav.
 Multimedia sound is either digitally recorded audio or
MIDI (Musical Instrumental Digital Interface) music.
DIGITAL AUDIO
 Digital audio data is the actual representation of sound,
stored in the form of samples.
 Samples represent the amplitude (or loudness) of sound
at a discrete point in time.
 Quality of digital recording depends on the
 sampling rate (or frequency) – the number of samples taken
per second.
 sample size – the amount of info stored in sample

 The three sampling frequencies most often used in

multimedia are CD-quality 44.1 kHz, 22.05 kHz and
11.025 kHz.
(CONT.) DIGITAL AUDIO
 The number of bits used to describe the amplitude of sound
wave when sampled, determines the sample size.
 Digital audio is device independent.

 The value of each sample is rounded off to the nearest

integer (quantization).
 Crucial aspects of preparing digital audio files are:
 Balancing the need for sound quality against available RAM and
hard disk resource.
 Setting appropriate recording levels to get a high-quality and clean
recording.
(CONT.) DIGITAL AUDIO
 Audio resolution determines the accuracy with which
sound can be digitized.
 Size of a monophonic digital recording = sampling rate x
duration of recording in seconds x (bit resolution/8) x 1.
 Size of stereo recording = sampling rate x duration of
recording in seconds x (bit resolution/8) x 2.
 Once a recording had been completed, it almost always
needs to be edited.
 Audacity – an open source, cross platform editing tool
for digitizing sound. (http://audacity.sourceforge.net).
MONOPHONIC
 Commonly called mono sound, mono or non-stereo
sound, this early sound system used a single channel of
audio for sound output.
 Monophonic sound is the most basic format of sound
output.
 Mono (monophonic, or monaural) is sound from a single
source.
 All speakers in a mono system (like an intercom) will
carry the same signal.
EXAMPLE OF MONOPHONIC
STEREOPHONIC
 Commonly called stereo sound or just stereo
 Stereophonic sound divides sounds across two channels
(recorded on two separate sources) then the recorded
sounds are mixed so that some elements are channeled to
the left and others to the right.
 Stereo (stereophonic) is sound from two sources, ideally
spaced apart, and reproduces sound the way we hear it
naturally, with two ears.
EXAMPLE OF STEREOPHONIC
(CONT.) DIGITAL AUDIO
 Basic sound editing operations include:
 Trimming- removing the ‘dead air’ or blank space from the front
of a recording and any unnecessary extra time off the end is your
first sound editing task (using mouse cursor and menu command
such as cut, clear, erase or silence)
 splicing and assembly- using the same tools mentioned in
trimming, which will probably want to remove the extraneous
noises that inevitably creep into a recording.
 volume adjustments- select all the data in the file, and raise or
lower the overall volume by certain amount.
 working on multiple tracks - being able to edit and combine
multiple tracks (for sound effects, voice-over, music, etc.) and
then merge the tracks and export them in a ‘final mix’ to a single
audio file is important.
(CONT.) DIGITAL AUDIO
 Additional available sound editing operations include:
 format conversion- in some case, your digital audio editing
software might read a format different from that read by your
presentation or authoring program.
 resampling or downsampling- if you recorded and edited your
sounds at 16-bit sampling rates but are using lower rates and
resolutions, you must resample or downsample the file.
 fade-ins and fade-outs- to smooth out the very beginning and
the very end of a sound file.
 Equalization – some programs offer digital equalization (EQ)
capabilities that allow you to modify a recording’s frequency
content so that it sounds brighter or darker.
(CONT.) DIGITAL AUDIO
 time stretching- advanced programs let you alter the length (in
time) of a sound file without changing its pitch.
 digital signal processing (DSP) – some programs allow you to
process the signal with reverberation, multitap delay, chorus,
flange, and other special effects using digital signal processing
(DSP) routines.
 reversing sounds- reverse all or a portion of a digital audio
recording (played backward).
MIDI AUDIO
 MIDI is a shorthand representation of music stored in
numeric form.
 It is not digitized sound.

 A sequencer software and sound synthesizer is required

in order to create MIDI scores.
 MIDI is device dependent.

 Since they are small, MIDI files embedded in web pages

load and play promptly.
 Length of a MIDI file can be changed without affecting
the pitch of the music or degrading audio quality.
 Working with MIDI requires knowledge of music theory.
AUDIO FILE FORMATS
 A sound file’s format is a recognized methodology for
organizing data bits of digitized sound into a data file.
 On the Macintosh, digitized sounds may be stored as
data files, resources, or applications such as AIFF or
AIFC.
 In Windows, digitized sounds are usually stored as WAV
files.
 CD-ROM/XA (Extended Architecture) format enabled
several recording sessions to be placed on a single CD-R
(recordable) disc.
 Linear Pulse Code Modulation is used for Red Book
Audio data files on consumer-grade music CDs.
MIDI VS DIGITAL AUDIO
 MIDI is analogous to structured or vector graphics,
while digitized audio is analogous to bitmapped images.
 MIDI is device dependent while digitized audio is device
independent.
 MIDI files are much smaller than digitized audio.

 MIDI files sound better than digital audio files when

played on a high-quality MIDI device.
(CONT.) MIDI VS DIGITAL AUDIO
 With MIDI, it is difficult to playback spoken dialog,
while digitized audio can do so with ease.
 MIDI does not have consistent playback quality while
digital audio provides consistent playback quality.
 One requires knowledge of music theory in order to run
MIDI, while digital audio does not have this
requirement.
ADDING SOUND TO MULTIMEDIA
PROJECT
 File formats compatible with multimedia authoring
software being used along with delivery mediums, must
be determined.
 Sound playback capabilities offered by end user’s system
must be studied.
 The type of sound, whether background music, special
sound effects, or spoken dialog, must be decided.
 Digital audio or MIDI data should be selected on the
basis of the location and time of use.
PROFESSIONAL SOUND
 Red Book (or ISO 10149) standard is a standard for
digitally encoding high-quality stereo.
 For this standard, the digital audio sample size is 16 bits and
sampling rate is 44.1 KHz.
 The amount of digital sound information required for high-
quality sound takes up a great deal of disk storage space.
 Compression techniques reduce space but reliability suffers.

 Space can be conserved by downsampling or reducing the

number of sample slices taken per second.
 File size of digital recording (in bytes) = sampling rate X
duration of recording (in secs) X (bit resolution/8) X
number of tracks.
PRODUCTION TIPS
 Recording on inexpensive media rather than directly to
disk prevents the hard disk from being overloaded with
unnecessary data.
 The equipment and standards used for the project must
be in accordance with the requirements.
 It is vital to maintain a high-quality database that stores
the original sound material.
 Sound and image synchronization must be tested at
regular intervals.
(CONT.) PRODUCTION TIPS
 The speed at which most animations and computer-based
videos play, depends on the user’s CPU.
 Sound’s RAM requirements as well as the users’
playback setup must be evaluated.
 Copyrighted material should not be recorded or used
without securing appropriate rights from owner or
publisher.
SUMMARY
 MIDI is a shorthand representation of music stored in
numeric form.
 Digital audio provides consistent playback quality.

 MIDI files are much smaller than digitized audio.

 MIDI files sound better than digital audio files when

played on high-quality MIDI device.
SOFTWARE