Landform Lab

Constructive and Destructive Processes

 Constructive processes build landforms through tectonic and
depositional processes.
 Tectonic processes include movements at plate boundaries, earthquakes,
orogeny, deformation, and volcanic activity.
 Deposition is the accumulation or accretion of weathered and eroded
materials.

 Destructive processes break down landforms through

weathering, erosion, and mass wasting.
 Weathering is the disintegration of rocks by mechanical, chemical, and
biological agents.
 Erosion is the removal and transportation of weathered material by water,
wind, ice, or gravity.
 Mass wasting is the rapid down-slope movement of materials by gravity.

 Other Agents and Processes that Affect Landform Development

 Climate: temperature, precipitation, water cycle, atmospheric conditions
 Time: fast and slow rates of change
 People: influences on natural resources and earth surface processes
 Constructive Processes
 Constructive processes are responsible for physically building or
constructing certain landforms. Constructive processes include tectonic
and depositional processes and their landforms.
Tectonic Landforms are created by massive earth movements due to tectonic and
volcanic activity, and include landforms such as : mountains, rift valleys, volcanoes,
and intrusive igneous landforms

Depositional Landforms are produced from the deposition of weathered and eroded
surface materials. Depositional landforms include features such as: beaches, deltas,
flood plains, dunes, alluvial fans, and glacial moraines.
The Stromboli Volcano erupting off the Floodplain deposits at the confluence
coast of Sicily in the Mediterranean Sea. of Mississippi and Arkansas Rivers.

Source: wikimedia commons Copyright ©Google Earth 200

 Destructive Processes
 Destructive processes create landforms through weathering and
erosion of surface materials facilitated by water, wind, ice, and
gravity. Mass-wasting events occur in areas where weathering and
erosion is accelerated.
 Weathering is the disintegration and decomposition of rock at or near the Earth’s
surface by mechanical, chemical, or biological weathering processes.
 Erosion is the removal and transportation of weathered or unweathered materials
by water, wind, ice, and gravity .
 Mass-Wasting is a rapid period of weathering and erosion that removes and
transports materials very quickly and is often triggered by an environmental stimuli.
Mass wasting includes rock falls, landslides, debris and mud flows, slumps,
and creep.

Landforms formed by destructive processes include river and stream

valleys, waterfalls, and glacial valleys.
 Tectonic Landforms
 Mountains: Orogenesis and Deformation
 Folding
 Faulting

 Fractures

 Domes and Basins

 Horst and Graben Rift Valleys
 Major Mountain Ranges:
 Rocky Mountains

 Appalachian Mountains

 Himalayan Mountains

 Andes Mountains
 Orogenesis
 Orogenesis is the thickening of the continental crust and the building of
mountains over millions of years and it translates from Greek as “birth of
mountains”, (oros is the Greek word for mountain).
 Orogeny encompasses all aspects of mountain formation including plate
tectonics, terrane accretion, regional metamorphism, thrusting, folding,
faulting, and igneous intrusions.
 Orogenesis is primarily covered in the plate tectonics section of the earth
science education materials, but it is important to review for the landform
section because it includes deformation processes responsible for mountain
building.
South Carolina’s Blue Ridge
Mountains and Inner Piedmont
Region were formed by multiple
orogenic events when rocks
forming South Carolina were
uplifted, metamorphosed, folded,
faulted, and thrusted. More
information on the Blue ridge
mountains is included on the
section for the Appalachian
Mountain Range.
Photo courtesy of SCGS, SCDNR
 Deformation
 Deformation processes deform or alter the earth’s crust by extreme stress or pressure in
the crust and mantle.

 Most deformation occurs along plate margins from plate tectonic movements. Folding
and faulting are the most common deformation processes.

 Folding occurs when rocks are compressed such that the layers buckle and fold.

 Faulting occurs when rocks fracture under the accumulation of extreme stress
created by compression and extensional forces.
Both of these folds are in biotite-rich gneiss from the South Carolina Piedmont, the areas where the folds
are most pronounced contain greater amounts of quartz from the granitic composition of the rock. The
scale card shows us that the rock on the left contains smaller folds than the rock on the right.

Photo: South Carolina Geological Survey Photo: South Carolina Geological Survey
 Folding
 Folding occurs when rocks are compressed or deformed and they
buckle under the stress.
 The diagram below is a cartoon illustrating how rocks fold.

 The crest of the fold, where the

rock layers slope downward
form the anticline.

 The valley of the fold where the

layers slope toward the lower
axis form the syncline.
 Folding
 Anticlines and synclines can take on slightly different geometries depending on the
compressional forces that form them.

 Very intense compressional forces form tight isoclinal folds, less intense compressional forces
produce open folds.

 Folds can be asymmetric, upright, overturned, or curved. A fold pushed all the way over onto its
side is called recumbent.

 Twisting or tilting during rock deformation and compression can cause folds to form at different
angles.

 Some folds are very small and can be viewed in hand held specimens, while other folds are as
large as a mountain and can be viewed from aerial photos.
 Folding
Anticline exposed along NJ Route 23 near Syncline valley between
Butler NJ. The man in the bottom of the mountain peaks.
photo helps show the scale of the folds.

Copyright ©Michael Lejeune

Copyright ©USGS
Recumbent folds in limestone.
Overturned folds in the Table Rock gneiss in
South Carolina’s piedmont. The rock
hammer in the photo is used for scale.

Copyright ©Marli Miller, University of Oregon

SCGS photo
 Faulting
 Faulting occurs when the rocks fail under deformation processes. A fault is a planar discontinuity along which displacement
of the rocks occurs.
 There are four basic types of faulting: normal, reverse, strike-slip, and oblique.

Normal
1. Normal: rocks above the fault plane, or hanging
wall, move down relative to the rocks below the
fault plane, or footwall. Strike-Slip
2. Reverse: rocks above the hanging wall moves up
relative to the footwall
Reverse 3. Strike-slip: rocks on either side of a nearly
vertical fault plane move horizontally
Geologists recognize faults by looking for off-set rock layers in outcrops.
 Geologists recognize faults by looking for off-set rock layers in outcrops.
 Faults may also be recognized by debris, breccia, clay, or rock fragments that break apart or are pulverized during the
movement of the rocks along the fault plane. Fault ‘gouge’ is a term used to describe the material produced by faulting.
 If a fault plane is exposed, there may be grooves, striations (scratches), and slickenslides (symmetrical fractures) that show
evidence of the rocks movement.
 Large fault systems, such as the San Andreas fault can be seen from aerial imagery.
Faulting
 Faulting
The San Andreas fault is the largest fault system in North
America and it runs for nearly 780 miles through western
California and in some places the width of the fault zone is 60
miles. The San Andreas fault is a transform boundary between
the Pacific Plate on the west and the North American Plate to
the east. The Pacific Plate is moving northwestward against the
North American Plate. This motion generates earthquakes along
the fault that pose significant hazards to people and alters the
physical landscape.

Photo: South Carolina Geological Survey

These two faults are from South Carolina’s
Piedmont. These faults are evident by the
off-set igneous intrusions in the rock.

Offset in stream valley from

San Andreas Fault movement
Photo: South Carolina Geological Survey
Copyright © Michael Collier
 Domes and Basins
 Domes and basins are large, elongated folds formed by broad warping processes
including mantle convection, isostatic adjustment, or swelling from a hot spot.
 Upwarping produces domes, while downwarping produces basins.
 Geologists identify dome and basin structures by the stratified ages of the rock folds:
 Domes contain strata which increase in age toward the center as the younger

layers are eroded from the top and sides.

 Basins contain strata which is youngest toward the center and the oldest rocks

form the flanks or sides.

This geologic map of the Michigan Basin

illustrates the circular pattern of the
sedimentary strata. The green color in the
center of the map represents the youngest
rocks which are Upper Pennsylvanian; and
the rocks progressively increase in age
toward the periphery where the reddish-
orange colors represent the oldest rocks
flanking this structure which are Ordovician
and Cambrian age.

Oldest Rocks (Ordivician and Cambrian)

Youngest rocks (Upper Pennsylvanian)
http://en.wikipedia.org/wiki/Michigan_Basin
 Horst and Graben:
Basin and Range
 Horst and graben topography is generated by normal faulting associated with crustal
extension.
 The central block termed graben is bounded by normal faults and the graben drops as
the crust separates.
 The graben forms an elongated valley that is bound by uplifted ridge-like mountainous
structures referred to as horsts.
 Some horsts may tilt slightly producing asymmetric, tilted terrane or mountain ranges.
 In the Western United States, horst and graben fault sequences are described as “Basin
and Range” topography.
Basin and Range topography, Nevada.

Copyright © Marli Miller, University of Oregon

 Rift Valleys
 Rift valleys are fault structures formed by normal faults.
 Rising magma below the crust upwells, forcing the lithosphere to fracture, as it
fractures and cracks, one or more faults cause the crustal rocks to separate forming a
rift valley.
 Rift valleys can eventually form lakes or seas such as the Red Sea, which separates
Africa from the Arabian Peninsula. Rift valleys can become inactive and fill in with
volcanic material, such as the rift structure in the United States which extends from
Lake Superior to Oklahoma.

Rift Valleys in Africa East African Rift Valley Lake

www.visibleearth.nasa.gov
 Major Mountain Ranges of the World
 Antarctica: Antarctic Peninsula, Transantarctic Mountains
 Africa: Atlas, Eastern African Highlands, Ethiopian Highlands
 Asian: Himalayas, Taurus, Elburz, Japanese Mountains
 Australia: MacDonnell Mountains
 Europe: Pyrenees, Alps, Carpathians, Apennines, Urals, Balkan Mountains
 North American: Appalachians, Sierra Nevada, Rocky Mountains, Laurentides
 South American: Andes, Brazilian Highlands

European Alps Himalaya

Mountains
Rocky
Mountains Appalachian
Mountains

Andes
Mountain
s
 Rocky Mountains
 The Rocky Mountains, which extend from British Columbia to Texas were formed by the
Laramide Orogeny 40-80 million years ago; however, there is still active uplift today.
 Colorado’s Front Range, the Sangre de Cristo Mountains of Colorado and New Mexico, the
Franklin Mountains in Texas, and Wyoming’s Bighorn Mountains are all part of the “Rocky
Mountain Range”.
The Rocky Mountains contain some of the most
beautiful scenery in North America and are home
to hundreds of parks and recreational areas
including Rocky Mountain National Park,
Yosemite National Park, Glacier National Park,
and Grand Tetons National Park.

Source: USGS
The Laramide Orogeny was characterized by intense
tectonic activity resulting from a series of compressional
and extensional events. The subduction of the Pacific
Ocean Plate caused compressional forces in the continental
plate, and pushed the oceanic plate downward. Following
subduction of the oceanic plate, upwelling and extensional
forces caused the literal uplift of the continental bedrock
and formed of the Rocky Mountains. The lower crust in this
region of upwelling and uplifting is relatively thin and
stretches under pressure. The upper crust is very brittle and
deforms easily. As a result the upper crust is characterized
by large angular tilted faults blocks which form the Rocky
Mountains we see today. Copyright© Dr. Roger Slatt, University of Oklahoma
 Appalachian Mountains
 The Appalachian Mountains extend along the eastern margin of North America from
Alabama to Maine in the United States, and through the southeastern provinces of Canada
to Newfoundland.
 The Appalachian Mountains were formed during the Paleozoic Era from several orogenic
episodes, the Taconic Orogeny (Ordovician ~480 mya), followed by the Acadian Orogeny
(Devonian ~400 mya), and lastly the Alleghany Orogeny (Permian ~ 300 mya).
 Each of these major orogenic episodes involved multiple events of folding, faulting,
metamorphism, emplacements of igneous intrusions, and uplift.
 The Appalachian Mountains are divided into four major provinces: Piedmont, Blue Ridge,
Valley and Ridge, and Appalachian Plateau.
Waterfall carved into valley
of Blue Ridge Province of
the Appalachians near the
South Carolina and North
Carolina border.

www. maps.google.com
This is an aerial view of the Susquehanna River
in Pennsylvania flowing through the folded
and faulted Valley and Ridge Province of the
Appalachian Mountains.
Source: SCGS
Source: USGS
 Andes Mountains
 The Andes Mountains began forming during the Jurrasic period (~200 mya) when plate
tectonics forced the oceanic Nazca plate to subduct beneath the continental South
American plate.
 The subduction zone between the plate margins marks the Peru-Chile ocean trench which
is 26,500 ft (8,065 meters) below sea level.
 Tectonic forces along this active continental margin are forcing the ongoing uplift, folding,
faulting, and thrusting of bedrock forming the Andes Mountains.
 The Andes are the longest mountain range on land and they extend along the entire
western coast of South America. They are divide into three sections: (1) Southern Andes in
Argentina and Chile, (2) Central Andes including the Chilean and Peruvian cordilleras an
parts of Bolivia, and (3) Northern sections in Venezuela, Columbia, and Ecuador, including
to parallel ranges the Cordillera Occidental and the Cordillera Oriental.
 The Andes Mountains contain many active volcanoes, including Cotopaxi in Ecuador, one of
the largest active volcanoes in the world.

http:visibleearth.nasa.gov/
 European Alps
 The European Alps began forming during the Alpine Orogeny (~ 20-120 mya) with the
collision of the African Plate moving northward into the European Plate. This motion is still
active today as the Alps continue to uplift, fold, fault, and accrete.
 The Alps are the largest mountain range in Europe and they extend from Austria and
Slovenia in the east, through Italy, Switzerland, Germany, and France in the west.
 Major orogenic events involved recumbent folding and thrust faulting of crystalline
basement rocks that today form some of the highest peaks in the Alps.
 The Alps were one of the first mountain ranges to be studied by geologists and as a result
many geomorphic terms, especially those relating to glaciation and ‘alpine’ environments,
were first defined in the European Alps.
African Plate
Austria
Germany
European
Switzerland Plate
p s
Al
e an
r op Slovenia
France Eu Italy

http://en.wikipedia.org/wiki/Matterhorn
The Matterhorn, on the border between
Switzerland an Italy, is one of the most familiar
mountains in the world and is a popular climbing
site. The continent-continent collision resulted in
the peak of the Matterhorn containing bedrock
from the African Plate while the lower portions
contain bedrock from the European Plate.
Modified from: http://en.wikipedia.org/wiki/Alps
 Himalaya Mountains
 Himalaya orogeny began 45-54 million years ago from the collision between the India
and Eurasian Plates and is still active today.
 When two continental plates collide, the Earth’s crust at the plate boundaries is folded,
faulted, overthrusted, uplifted forming an extensive continental mountain range.
 Today, the Himalayas separate the Indian sub-continent from the Tibetan Plateau and
they are recognized as the tallest above sea level mountains on Earth. The Himalayas
contain 10 of the tallest mountain peaks on Earth >8,000 meters , including Mount
Everest with a peak of 8850 meters (29,035 ft). In addition, the Himalayas include
three major individual mountain ranges, the Karakoram, Hindu Kush, and Toba Kakar.
 Shallow, intermediate, and deep earthquakes are associated with this zone, and
scientists predict that several major earthquakes will occur in the region posing a
significant hazard to millions of people.
The name Himalaya is from Sanskirt,
and it means “the abode of snow”.
Continental – Continental Plate Collision
‘Hima’ for snow and ‘alaya’ for abode.

http://en.wikipedia.org/wiki/Image:Himalayas.jpg
www.usgs.gov
 Volcanic Landforms:
Extrusive Igneous

 Cinder Cones
 Shield Volcanoes
 Strato (Composite)Volcanoes
 Lava Domes
 Caldera
 Volcanic Necks
 Volcanic Hot-Spots
 Cinder Cones
 Cinder cones are relatively small cone shaped hills (< 2000 ft of relief) formed by the accumulation
of cinders and ash during volcanic eruptions. The cinders form from bursting bubbles of gas in the
magma that eject lava into the air. The summit my be truncated or bowl-shaped where the magma
emerges from a single central vent or volcanic neck.
 Cinder cones are formed from an accumulation of ejected tephra and scoria rocks. Tephra and scoria
occur in a range of different sizes from fine ashes to large volcanic rock fragments. Once the magma
is ejected into the air, it cools, hardens, and is deposited on the summit or slopes of the cinder cone.
The pyroclastic tephra and scoria rocks are produced from gas-rich basaltic magma, and is usually
reddish-brown to black in color.
 Cinder cones generally form from a single volcanic episode and are rarely associated with eruptions
lasting more than a decade.
 Cinder cones can be found in combination with shield and strato volcanos and can occur at
convergent or divergent plate boundaries.
 Cinder cones are the most common type of volcano and often occur in large numbers within a region
forming ‘volcano fields’. Flagstaff Arizona contains a volcanic field of nearly 600 cinder cones.

Cinder cones have an easily

recognizable hill shape form with
relatively steep 30-40 degree
slopes. This angle represents the
steepest angle maintained by
unconsolidated, loose material and
is commonly referred to as the
angle of repose. This image is of
an older cinder cone with small
caldera depression on the summit.

Copyright © Larry Fellows, USGS

 Shield Volcanoes
 Shield volcanoes are broad shaped mountain landforms built by the accumulation of fluid basaltic
lava. Their slopes are often very gentle and may be < 5 degrees, and their summits, or peaks,
are relatively flat. They received their name because their gently domed form resembles the
exterior of a warrior’s shield.
 Most shield volcanoes originate from the ocean floor and have ‘grown’ to form islands or
seamounts. Hawaii and the Galapagos Islands are examples of shield volcanoes that formed in
the ocean and emerged as mountainous, island landforms.
 Magma, or lava, discharges from both the summit and rifts along the slopes. Most lava that
forms shield volcanoes erupts as a flow from fissures; however, occasional high intensity
pyroclastic ejections may occur.
 Shield volcanoes usually have either smooth, ropy pahoehoe lava, or blocky, sharp aa lava.
 Shield volcanoes form the largest volcanoes on Earth.
Mauna Loa Volcano on Hawaii is a shield
volcano and the lava flow below illustrates a
typical eruption for a shield volcano.

Courtesy USGS Hawaiian Volcano Observatory

Photo: D. Little, USGS
 Strato Volcanoes
 Strato-volcanoes, also referred to as composite cones, are large, nearly symmetrical mountainous
landforms, formed by a combination of lava flows and intense pyroclastic eruptions.
 Eruptions are violent and the ejected material is primarily a gas-rich, high viscosity (resistance to
flow) magma with an andesitic composition. Eruptions can also produce extensive ash deposits.
 Most strato volcanoes are located along the ring of fire which is a geographic zone that rims the
Pacific Plate where it is in contact with the Eurasian, North American, and Indo-Australian Plate.
 Well-known strato volcanoes occur in the Andes, the Cascade Range of the United States and
Canada (including Mount St. Helens, Mount Ranier, and Mount Garibaldi), and the volcanic
islands of the western Pacific from the Aleutian Islands to Japan, the Philippines, and New
Zealand.
Mount St. Helens 1980 eruption

USGS Cascades Volcano Observatory

 Caldera
 Calderas are bowl-shaped collapse depressions formed by volcanic processes.
 Calderas most likely result from one of three collapse type events:
 1. Collapse of the summit following an explosive eruption of silica-rich pumice and ash pyroclastics
 2. Collapse of the summit following the subterranean or fissure drainage of the magma chamber
 3. Collapse of a large area following the discharge of silica-rich pumice and ash along ring fractures that may
or may not have been previously active volcanoes
 Crater Lake in Oregon is an example of a 700 year old caldera that formed from the eruption and
collapse of Mount Mazama. Today it is filed in with rainwater and forms a lake. A small cinder cone,
named Wizard Island, formed inside the caldera and today it emerges as an island in the lake.
 Many of the calderas on Hawaiian volcanoes formed after the magma drained through fissures in
the central magma chamber and the summit eventually collapses.
 Yellowstone National Park contains a caldera that is >43 miles across and was formed by an
intense pyroclastic eruption that ejected ash fragments as far as the gulf of Mexico.

Crater Lake in Oregon is

the collapsed caldera of
Mount Mazama and is now
filled in with water.
Wizard Island is a volcanic
cone in the middle of the
lake. Crater Lake is the
deepest lake in the United
States at 1,932 feet deep!

Copyright Larry Fellows, USGS

 Lava Domes
 Lava domes are rounded, steep-sided mounds built by very viscous magma that is
resistant to flow and builds up forming a dome.
 The magma does not move far from the vent before cooling and it crystallizes in very
rough, angular basaltic rocks.
 A single lava dome may be formed by multiple lava flows that accumulate over time.

This lava dome began forming after the Mount

St. Helen’s eruption in 1980. Geologists set up a
monitoring station to measure the growth of
this lava dome and recorded that it is growing
at a rate of about 40 feet per year.

Copyright©Lyn Topinka
 Volcanic Hot Spots
 Volcanic hot-spots occur where a mass of magma ascends toward the earth’s surface as a mantle
plume, releasing basaltic magma that generates volcanic activity at a locally specific site.
 Hot-spots do not occur along plate boundaries but instead form as intraplate volcanic features
characterized by magma upwelling. Once a hot spot is generated it may stay active for millions of years.
 Hot spots may produce thermal effects in the ground water and the crust producing geothermal power
often in the form of steam. In Iceland and Italy geothermal power is used to generate electricity for
industrial and municipal use.
 The Hawaiian Islands formed over the last 5 million years from a hot spot in the Pacific Ocean. As the
Pacific plate moves over the hotspot, it generates a chain of islands that emerge as seamounts above
the ocean’s surface. Hot spot activity is currently most active on the big island, Hawaii.

Nihau Kauai
Oahu
Oldest Islands
Molokai
Maui
Pa Lanai
cif
ic Kahoolawe
Pl
at Hawaii
e
M
ov
em
en
t

Youngest Islands www.usgs.gov

www.maps.google.com
 Volcanic Necks
 Volcanic necks are remnant cooled lava pipes that are exposed after the exterior
volcanic mountain is weathered and eroded.
 Volcanic necks are a good example of differential weathering. The magma cooled in
the interior pipes is more resistant than the ejected deposits that accumulate on the
exterior. As a result, when the volcanic mountain erodes, it leaves behind the remnant
more resistant volcanic neck.

Shiprock is a volcanic neck of a solidified

lava core from a dormant 40-million year
old volcano. Its elevation is 7,178 feet
above sea level with a local relief of
1,800 feet. It lies southwest of the town
of Shiprock, New Mexico, and was
named after 19th -century clipper ships.

Copyright © Michael Collier

 Volcanic Landforms:
Intrusive Igneous
 Batholiths
 Plutons
 Laccoliths
 Dikes
 Sills

Source: USGS
 Batholith
 Batholiths are massive igneous intrusions that form linear bodies that extend for hundreds of
kilometers across the landscape and can be several kilometers thick.
 Some batholiths may incorporate groups of smaller plutons in addition to their massive structure.
 Batholiths form below the earth’s surface as intrusions of magma emplaced during tectonic
processes. Following emplacement they may be uplifted and exposed by weathering and erosion
processes.
 Some batholiths are metamorphosed by heat and pressure. For example, many of the batholiths in
the Appalachian Mountains are metamorphosed igneous intrusions.

Half Dome is a granitic igneous intrusion

that forms an impressive mountain peak
that is part of the greater Sierra Nevada
Batholith in Yosemite National Park. The
‘Half Dome’ shape was carved by glacial
erosion. The Sierra Nevada Batholith, which
includes Half Dome, Mt. Whitney, and El
Capitan, became exposed as the mountains
uplifted and weathering and erosion
removed the material surrounding the
batholith.

Copyright © Bruce Molnia at Terra Photographics

 Plutons
 Plutons are intrusive igneous rocks which form below the Earth’s surface and are surrounded by
sedimentary or metamorphic rocks.
 Plutons are formed as magma forces its way up through other rocks and solidifies before reaching
the surface.
 Some plutons are remnant magma chambers that once fueled volcanic activity.
 Plutons become exposed on the landscape as the other rocks surrounding them are removed by
weathering and erosion.
 Some plutons appear as small or large hills while others appear as tabular, flat rock exposures.

Enchanted Rock is a large granitic

pluton in the Llano Uplift of the Texas
Hill Country Region that is part of a
larger igneous batholith.

http://en.wikipedia.org/wiki/Image:Enchanted_rock_2006.jpg
 Sills, Laccoliths, and Dikes
 Sills and laccoliths are igneous intrusions that form near the earth’s surface. They are
concordant features meaning that they form parallel to existing strata or structures.
 Sills form near the surface from very fluid magma that cools quickly they are usually mostly
basaltic rocks with an aphanitic (fine-grained) texture.
 Laccoliths are similar to sills, accept they are formed by more viscous magma which collects in a
lens shape prior to cooling as a concordant igneous intrusion near the surface. This process may
force the overlaying strata to form a slightly domed structure over the bulging laccolith.
 Dikes are tabular intrusions of igneous rock that form when magma injects into fractures. Dikes
are discordant features, meaning that they cut through layers of rock.
 Magma can force the rock apart separating the fracture.
 The cooled magma can range in thickness from centimeters to kilometers and may be more
resistant to erosion than the surrounding rocks enabling them to protrude outward amidst their
surroundings.

The dark linear

feature in this
image is an
exposed dike that
is more resistant
to weathering and
erosion than the
http://en.wikipedia.org/wiki/sill surrounding
landscape.
Salisbury Craig is an exposed sill north of
Edinburg, Scotland that forms a resistant
cap on this hill top.
34
 River Systems
 Lakes and Dams
 Braided Rivers
 Meandering Rivers
 River Canyons
 Waterfalls
 Flood plains
 Alluvial Fans

Photo: SCGS

The Congaree River in South Carolina is home to Congaree

National Park which is a large flood plain ecosystem that
protects some of the oldest and largest bottomland
hardwood forests in the nation. Almost every year the
Congaree River floods the National Park providing water,
sediments, and nutrients that support the incredible
growth of the forest and rich biodiversity of organisms.

35
Standards: 3-3.5, 3-3.6, 3-3.8
Standards: 5-3.1
Standards: 8-3.7, 8-3.9
Dams and Lakes
 Dams are control structures on rivers which store and release river water from a lake (reservoir)
according to specific operating regimes.
 Some dams are run-of-river structures which continually release the same amount of water entering
the reservoir, while others are operated as storage facilities for regulated control on water releases.
 Although 70 percent of the earth is covered with water, only about 2.5 percent is freshwater, by
building dams with reservoirs people are able to store the freshwater and use it as needed.
 Dams provide water for drinking, irrigation, hydro-electric power, river navigation, flood control,
recreation, and many other needs.
 Dams disconnect river channels and can function as local base level controls on stream gradient and
store sediment from transporting downstream. They also act as barriers to migrating species, such
as fish traveling upstream to spawn, and the controlled water releases alter the downstream
ecology of river systems and their floodplains.
Lake Murray and Saluda Dam: Lake Powell and Glen Canyon Dam:
Saluda River, South Carolina Colorado River, Arizona

www.sceg.com Photo: Paul R. Kucher 36

Table of Contents
 Braided
 Braided river patterns occur in high-energy environments that contain an excessive
sediment load that is deposited on the bed of the channel. The stream loses the
capacity to transport the sediments and it forces its way through the accumulation of
sediments forming an interwoven network of channels.
 The islands between the braided channels are ephemeral and dynamic. The sediment
is continually remobilized, transported and deposited, leaving minimal time for
vegetation to establish, as a result they are rarely vegetated.
 Braided channels tend to be wide and shallow with defined banks that are higher than
the mid-channel islands.
 Braided channels occur downstream of areas with high sediment loads. Their sediment
textures vary from silts, sands, and gravels depending on the sediment source.

This is the braided

Resurrection River in Alaska.
The sediment load consists
primarily of silt that has been
eroded and weathered from
glacial debris. Braided river
patterns may also be referred
to as anastomosing.

Copyright © Marli Miller, University of Oregon

 Meandering
 Meandering river patterns are low-gradient, sinuous channels that contain multiple,
individual meander bends that are laterally migrating across the flood plain.
 As they migrate or move across the flood plain they are continuously eroding,
transporting, and depositing alluvial sediments.
 Meandering rivers and their hydrologic conditions create a variety of depositional and
erosional landform features that collectively form the flood plain valley.
 The primary features of meandering channels are the aggrading pointbar deposit on
the inside of a meander bend and eroding cut bank along the outside of the bend. As
the channel migrates laterally across the flood plain, sediments are eroded from the
outer cutbank and deposited on the inner pointbar.
 Occasionally, meandering channels cut-off entire meander bends; these cut-offs are
incorporated into the flood plain as oxbow lakes or in-filled channels.

This is an aerial view of the meandering

Congaree River and flood plain in
Congaree National Park, South Carolina.
This image uses infrared colors instead
of true colors; the infrared reflectance
causes healthy vegetation to show up as
a reddish-pink color, instead of the green
we expect to see. The bottom right of
the image includes a recently cut off
meander bend and oxbow lake.
2006 Aerial imagery: http://www.dnr.sc.gov/GIS/gisdata.html
 Flood plains Cutbank
 Flood plains are the landform adjacent to
the river channel that is influenced by
modern river processes. Flood plains are
constructive, depositional landforms Pointbar
created by stream flow and sediment
deposition.
Infilled
 Flood plain environments are composed of Channel
a mosaic of different landform features
including cutbanks, pointbars, natural
levees, crevasse channels and crevasse
splays, infilled channels and oxbow
lakes, backswamps, and occasionally
yazoo tributaries and other flood plain
channels.
This aerial view of the Mississippi River Valley
Oxbow
contains many typical floodplain features. The Lakes
darker, green areas are floodplain forest and
they likely flood the most frequently and thus
are not developed with agriculture or housing.
The surrounding patchwork represents
agricultural fields and other developed lands
that are probably at a higher elevation formed
Copyright ©2008 Google
by natural or artificial levees.
 Flood Plains
 Cutbanks form along the outer convex margin of meander bends. Cutbanks , unlike most floodplain
landforms are actually erosional features formed by the lateral movement of the channel across the
flood plain. Flood plain sediments are eroded from the cutbank and deposited on pointbar surfaces.
 Pointbars are concave, depositional landforms that form opposite of the eroding cutbanks, and they
develop in concert with the laterally migrating river channel. Pointbars are typically composed of
sands, gravel, silts, and clay deposits, that form arcuate, meander-scroll ridges.
 Natural levees are depositional landforms formed from the vertical accumulation of sediments
deposited during flood events. Natural levees form topographically higher surfaces adjacent to the
river channel, that generally consist of stratified, well-sorted sands, silts, and clays. Natural levees
deposits are thickest and coarsest close to the channel and they become progressively thinner, and
finer with increasing distance from the channel.
 Crevasse channels and splays are breaches in the natural levee that result in the fan-shaped
deposition of flood deposits, beyond or over levee deposits. Crevasse channels can produce flooding
in backswamp areas, even before the levees are submerged by floodwaters.
 Oxbow lakes or infilled channels form when a meander bend is cut off from the main river and
abandoned in the floodplain. Abandoned meanders can occur in various stages from flooded oxbow
lakes to being completely infilled with sediment deposits.
 Backswamps are typically low-lying areas of the floodplain beyond the natural levee deposits.
Backswamps contain the finest-textured flood plain deposits and may even develop organic-rich soils
from the forest litter. They often form along the margins or edge of the floodplain, and are usually
influenced by connections to the groundwater.
 Yazoo tributaries are stream networks that enter the floodplain but the natural levee prevents the
stream from flowing into the river. As a result the yazoo tributary flows parallel to the mainstem river
before reaching a breach in the levee or occupying the course of an abandoned meander that allows
the stream to cross the levee deposits and flow into the river.
 Flood Plains
Both of these images are GIS-based models from the
Oxbow Congaree River floodplain in Congaree National Park. The
lake image on the left is a clip from a flood model that shows
the depth of flooding during a large flood event. The
natural levee adjacent to the channel is one of the
Infilled topographically highest features and it floods the least.
The abandoned meanders and back swamps are
Channel topographically lower and flood more frequently and to
Na greater depths. The channel networks fill up with water
tu
ral connecting the oxbow lakes to the main stem river. The
Le image below is from a high resolution digital elevation
ve
e model (DEM) of a floodplain. The DEM is useful for
mapping the different landform features on a floodplain.

Crevasse
Channels

Meander-Scroll
ridges
 River Terraces
 River terraces are older remnant flood plain surfaces that are higher in elevation than
the modern flood plain. They may occur on one or both sides of the valley.
 Terraces are formed when the river channel cuts down into the flood plain and laterally
erodes the alluvial valley, carving a new river channel and flood plain entrenched within
the older flood plain surfaces. Down cutting can occur because of hydrologic or
sedimentary changes in the headwaters or valley gradient changes caused by a
retreating sea-level and lowered or extended base-level. Terraces can also form from
tectonics and valley uplifting.
 Terraces are generally isolated from the more recent river processes and may only flood
during 100 or 500 year flood events. River terraces are often archeological hot spots
because they contain artifacts from historic colonies that used the river and flood plain.

Terrace 1
This river has gone through several
different episodes of down cutting
Terrace 2 and rejuvenation. The modern flood
plain is preceded by four different
terraces that all reflect distinct
Terrace 3 periods of environmental conditions
or valley gradients, each different
Terrace 4 from the other. Over time, it is
possible that the river will down-cut
again abandoning a fifth terrace.
River Channel and Modern Flood Plain

Copyright©Louis Maher, University of Wisconsin

 Waterfalls
 Waterfalls occur where there is resistant bedrock, abrupt changes in bedrock resistance, or along
fractures or faults in the bedrock.
 Less resistant materials are weathered more quickly than resistant rocks, creating stair-stepped
ledges or drop offs where waterfalls occur. Less resistant rocks may also form pools between
resistant rocks that form waterfalls.
 Faults and fractures often provide natural pathways for the downslope movement of water.
 The location of the waterfalls origin may be referred to as a “knick-point”, continued weathering
by the stream flow causes the knick-point to slowly migrate upstream.
 Most waterfalls in South Carolina occur along streams in the Blue Ridge, Piedmont, and the along
the Regional Fall Line where there are rock layers of varying resistance.

This waterfall was formed by differential

weathering between the softer shale and Lower White Water
harder more resistant limestone. Falls in the Jocassee
Gorges area of South
Carolina drops nearly
200 ft. Here, the
Toxaway Gneiss forms
a resistant bedrock
that the Lower White
Water River flows over
before draining into
Lake Jocasse.

Copyright © Marli Miller, University of Oregon Photo: SCGS

 Alluvial Fans
 Alluvial fans are fan-shaped fluvial deposits that accumulate at the base of
stream where it flows out from a steep gradient and enters into a lower-
gradient flood plain or valley setting.
 The stream enters the valley carrying a higher capacity sediment load than
it can continue to carry, and as a result it deposits the sediments as an
alluvial fan.
 Alluvial fans generally form in arid environments with a high sediment load
and where there is minimal vegetation to disrupt the fan formation.
 Alluvial fans may form from a single high-flow event or from the
accumulation of multiple events.

This alluvial fan is carrying a high sediment load

from material weathered from the mountains.
The dark line along the edge of the fan is a
road. Because the road is not buried by recent
deposits it suggest that this fan is not currently
as active as it was in the past.

Copyright © Marli Miller, University of Oregon

 Coastal Landforms
Coastal landforms include a diverse array of shoreline and near-shoreline
features, as well as some coastal plain landforms far removed from the modern
ocean by long term sea-level changes. This section will explore both constructive
and destructive landforms formed by current coastal processes, as well as
marine related landforms that were formed during periods of higher sea level.

 Littoral Zone Hawaiian coastline

 Beaches
 Barrier Islands
 Beach Ridges
 Spits
 Deltas
 Coastal Cliffs
 Marine Terraces
 Wave-Cut Scarps
Photo source: SCGS
 Beaches
 Beaches are depositional landforms along the coastal area where sediment is
transported and deposited by waves and currents. Although the sediment along the
beach is continually being mobilized there is an overall net accretion of deposition.
 The width of the beaches vary from one location to another and from one shoreline to
another. In some locations a shoreline might even lack a beach altogether.
 Most beaches are dominated by sand-sized quartz grains, and shells or shell fragments.
However, this can be highly variable depending on the landscape that drains into the
ocean and near-shore sediment sources. For example, some beaches in the Hawaiian
islands consist of coarse, red and black rock fragments formed by weathered lava; and
in France and Italy many beaches consist of pebbles and cobbles.
 Sediment movement along the beach is referred to as beach drift, and it generally
follows long shore currents traveling along a directional trend produced as waves
approach the shallower water in the surf zone near the shoreline.

Beaches often stabilize shorelines by

absorbing or deflecting wave and current
energy. During large storms, such as
hurricanes, beaches can experience extensive
erosion, and it can be years before they are
replenished. Beaches provide numerous
recreational activities and are a popular
destination for vacationers.

Photo: SCGS
 Barrier Islands
 Barrier islands, also referred to as barrier beaches, are long, narrow, depositional
landforms, that form parallel to the coastline and may or may not connect to the mainland.
They are the first line of protection against hurricane storm surge.
 They are generally composed of quartz sands, and they form along coasts where there is a
substantial supply of sand entering the ocean from Coastal Plain rivers.
 Barrier islands often form where tidal process are minimal.
 The landward side of the barrier islands may contain tidal flats, marshes, swamps,
lagoons, coastal dunes, and beaches.
 Similar to beaches, barrier islands form in relation to, long-shore current processes and
overtime adjust to sea-level changes.
 Classic examples of barrier islands include North Carolina’s Outer Banks and Texas’s Padre
Island. Both of these barrier islands have National Park Service lands that preserve natural
coastal processes and protect plant and wildlife habitat from human impacts.

Image: NOAA
 Deltas
 Deltas form where the mouth of a river meets its ultimate base level at the ocean or
sea. As the river’s velocity decreases, it looses the capacity to carry its sediment load
and the resulting deposits form a delta. Delta shapes and forms vary depending on
tidal influences, waves, currents, sediment type and quantity, river discharge, and the
stream gradient near the outlet. The most common types of deltas include bird-foot,
estuarine, and arcuate.
 Not all rivers form deltas, for example the Amazon deposits its sediment load directly
into the ocean onto an underwater seaward sloping continental shelf. The Columbia
River in the northwest United States, lacks a delta altogether, because the currents
are too strong and erosive for the sediments to deposit.
Mississippi River Delta: Bird-Foot Delta A bird-foot delta contains a large channel
with multiple smaller distributary channels
draining off from the main channel and
depositing sediments. They generally form
with rivers that have a high sediment load
and flow into an area with minimal tidal
influences. This false-color infrared image
provides a satellite view of the Mississippi
River delta. This delta has shifted
positions several times over the last 5000
years in relation to changes in the
Mississippi River. Scientist recognize
atleast 7 distinct deltas. The most recent
began forming 500 years ago and forms a
classic bird-foot delta.
 Deltas
Nile River and Arcuate Delta An estuary delta is formed where a river meets the
ocean and sediments from the river are filling in
the estuary. Estuaries contain a brackish mixture
of freshwater and saltwater, and they have a
moderate to strong tidal influence. Estuarine
deltas are a common deltaic landform and they
occur in several rivers along the western and
eastern United States coasts, the Seine River in
France, and the Tiber River in Italy. The ACE Basin
of South Carolina, named for the Ashepoo,
Combahee, and Edisto Rivers, protects nearly
150,00 acres of undeveloped estuary habitat.

ACE Basin: Estuarine Delta

The Nile River forms an arcuate fan-shaped
delta where it drains into the Mediterranean
Sea. It is one of the largest deltas in the
world; however, it is currently disappearing
because the upstream Aswan High Dam is
storing water and sediments and preventing
them from being deposited in the delta. As a
result the delta is eroding and saltwater is
encroaching into freshwater. Other typical
arcuate deltas include the Danube River
where it enters the Black Sea in Romania,
and the Ganges and Indus River Deltas
flowing into the Bay of Bengal.
 Continental Shelf and Slope
 The continental shelf is a submerged extension of the continental crust that slopes
gently outward from the modern shoreline to the deep ocean basin.
 The continental shelf varies in width from being almost non-existent along some
continental margins to extending outward for nearly 1500 kilometers (930 miles) in
other places. On average it extends outward for about 80 kilometers (50 miles) and
has an average slope of about 1 degree (2 meters/kilometer or 10 feet/mile).
Ocean floor features including continental shelf
and slope. This diagram provides a good
illustration of how the shelf is a shallow
extension of the continental crust.

Source: NASA, Visible Earth

A digital elevation model (DEM) of the

continental shelf and slope near Los
Angeles, California.
 Rift Zone
 Rift zones are fault structures formed by normal faults along active boundaries.
 Rising magma below the crust upwells, forcing the lithosphere to fracture, as it
fractures and cracks, one or more faults occur causing the rock layers to separate
forming a rift valley.
 Rift valleys can eventually form lakes or seas such as the Red Sea, which separates
Africa from the Arabian Peninsula.

Rift Valleys in Africa

Red Sea

Lake
Victoria
Copyright ©2008 Google Earth
 Continental Shelf and Slope: Mid-Ocean Ridges:
areas of turquoise colored boundary between divergent
continental crust around the plate margins, indicates areas of
continental margins sea-floor spreading

Mid-Atlantic East African Rift

Ridge Valley and Red Sea
Aleutian
Trench Kuril
Trench
Juan de Puerto Rico Japan
Fuca Ridge Trench Trench
Phillipine
Central America Trench
Trench
Mariana
Trench
East Pacific
Rise Java-Sunda
Trench
Tonga Peru-Chile
Trench Trench

Kermadec
Trench
South Sandwich
Trench
Pacific-Antartic Indian Ridge
Ridge

Ocean Basin: Rift Zone: Trenches:

all of the submerged ocean tectonically active deep, narrow features along active
floor beyond continental shelf areas of rifting that margins, trenches are dark blue
and slope, but excluding create new seas markings located on the map next to a
trenches. pink star “ “
 Glacial Landforms
Glaciers are large masses of moving ice. Because glaciers
are “frozen” they are part of the Earth’s cryosphere,
which accounts for 77 percent of all Earth’s freshwater.
 Ice sheets and Alpine Glaciers
Glaciers are very sensitive to the slightest temperature
changes. Over Earth’s geologic history the spatial extent
 Ice Field and Ice Caps
and size of glaciers has expanded and shrunk numerous  Piedmont Glacier
times. As a result, glacial landforms can be found in
locations that currently have no active glaciers or
 Tidal Glaciers and Icebergs
glaciation processes. Presently, glacial landforms occur in  Glacial U-shaped Valleys
two distinct geographic regions, high latitude polar
environments and high altitude mountain environments.
 Fjords
In this section we will explore glacial landforms from  Hanging Valleys
their present context and from a historic look into the  Cirques and Cirque Glaciers
past. Alpine Valley Glacier in Alaska.  Arêtes, Horns, Cols
 Lateral and Medial Moraines
 End and Terminal Moraines
 Paternoster Lakes
 Kettles
 Erratics
 Drumlins
 Outwash Plain
Copyright ©Bruce Molnia, Terra Photographics
 Glaciers
 Glaciers are large masses of “flowing” ice formed by the accumulation and compaction of
recrystallized melted snow.
 Glacial landforms are divided into two broad categories which occur in distinct geographic regions:
ice sheets which occur high latitude polar environments and alpine glaciers which occur in high
altitude mountain environments.

 Ice sheets are high latitude polar glaciers that cover extensive areas of continental
landmasses, for this reason they are also referred to as “ continental glaciers”. Glacial ice
sheet formation requires long periods of extremely low temperatures, which allows snow to
collect over vast areas covering the underlying terrain. The accumulation of snow forms dense
layers that are thousands of meters thick. Antarctica and Greenland are both almost completely
covered by glacial ice sheets.
 Alpine glaciers are long, linear glaciers that occupy high altitude mountain valleys, for this
reason they are also referred to as “valley glaciers”. Alpine glaciers flow down valley, and
increase in size as they accumulate and absorb smaller tributary glaciers from the mountainous
terrain. Alpine glaciers can be found all around the world, and presently occur in may of the
major mountain ranges in the world including the Rockies, Andes, and Himalayas. Alpine
glaciers may also occur in high-latitude, polar or arctic mountains, such as those in Alaska.

 Geomorphologist’s often refer to glaciers as “rivers of ice” because like rivers, continental and alpine
glaciers “flow” down-valley through the landscape eroding, transporting, and depositing weathered
materials along their the path. It is this combination processes that forms the diverse array of
constructive and destructive glacial landforms.
 Tidal Glaciers and Icebergs
 Tidal glaciers are the portion of either alpine or continental glaciers which spill out
into the sea and float on the surface of the saltwater.
 The glacial ice over the water breaks by calving off into large icebergs.
 Icebergs are large floating blocks of ice that calved off from tidal glaciers.
 Icebergs usually calve off along crevasses or cracks in the ice, but can also fail
from a combination of melting and gravitational pull.
 Icebergs vary in size and thickness, and some reach heights more than 100 feet!

The icebergs in the front of the

photo calved of from the tidal
glacier in the background. The
portion of the icebergs exposed
above the water is often only a
third of their entire size, the
other two-thirds is submerged
below the water.

Copyright ©Bruce Molnia, Terra Photographics

 Glacial “U-Shaped” Valleys
 Glacial valleys are formed by the abrasive action of glacial ice as it slowly carves a
“u-shaped” path through the mountainous valleys.
 Prior to the formation of the glacier, most valleys are initially formed as a “v-
shaped” stream valley eroded by flowing water. Once the valleys becomes
occupied by the glacier, the glacial ice spreads from one side of the valley to the
other, completely filling in the valley floor and up the hill slopes. As the glaciers
moves down-valley it abrasively erodes the pre-formed “v-shaped” stream valley
into a “u-shaped” glacial valley.
The Alaska's Woodworth Glacier, on the left
is beginning to retreat and expose a glacial
u-shaped valley beneath the melting ice. The
Sierra Nevada landscape with Yosemite
Valley pictured below, presently only
contains glaciers in the highest elevations,
but many of the prominent u-shaped valleys,
reveal past evidence of glacial erosion.

Copyright ©Bruce Molnia, Terra Photographics

Source: Wikimedia Commons
56
 Fjords
 Fjords are flooded troughs that form where glacial u-shaped valleys intersect the
ocean and the sea floods inland filling up the valley.
 Fjords can form during active glaciation or post-glaciation depending on sea-level.
 When a glacier intersects the ocean, the glacier can continue to erode and carve the
valley below sea-level. The water that fills in above the glacier and floods the valley
forms a fjord.
 Fjords can also form post-glaciation by rising sea-level or changes in elevation along
the coastline from melting ice.
On the left is a glacier intersecting a fjord in the Pacific
Ocean off Estero de las Montanas in Chile, South
America. Below is an aerial view of the Prince William
Sound and Cascade Glacier fjord in Alaska.

Copyright © Michael Collier, USGS Copyright © 2008 Google

 Hanging Valleys
 Hanging valleys are abrupt, cliff-like features that are formed at the confluence
where smaller tributary glaciers merge with larger valley glaciers.
 The scour of the larger glacier carves the valley into a u-shape, removing the
original gradient of the tributary confluence, as a result the tributary valley is left
stranded or “hanging” above the larger valley.
 Hanging valleys are only visible after the glacier melts and reveals the underlying
topography. Hanging valleys are often the sight of dramatic plunging waterfalls.
These images show hanging valleys in two
different periods. Below the tributary glacier is
retreating and a waterfall begins to form. The
image on the right is of a post-glacial hanging
valley, Bridal Falls in Yosemite National Park.

Hanging Valley
Copyright ©Bruce Molnia, Terra Photographics
 Lateral and Medial Moraines
Kennicott Glacier shows off multiple
Kennicott Glacier shows off multiple
 Moraines are formed by the deposition of medial moraines as it descends Mount
glacial till as the glacier melts. Moraines are Blackburn in the Wrangell-St. Elias
National Park in Alaska.
defined by where the glacial till was deposited
relative to the moving, melting glacier.
 Lateral moraines are long linear ridges of
glacial till deposited along the side of the
glacier parallel to its direction of movement.
 Medial moraines are long linear ridges that
form along the contact where tributary
glaciers with lateral moraines merge to join
larger valley glaciers (makes a “Y”-like
formation). Medial moraines form were the
glaciers merge together the till deposits
become incorporated as dark ridges of
sediment oriented down valley and aligned
parallel through the middle of the glacier.

Copyright © Michael Collier, USGS