Scribd
Upload
31 views

Control Charts

Control charts are a statistical process control tool used to monitor processes and identify assignable causes of variation. A control chart displays sample data over time with upper and lower control limits. If data points fall outside the control limits or form certain patterns, it indicates the process is out of control and assignable causes should be addressed to improve process stability and reduce variability. Common types of control charts include variables charts for continuous data and attributes charts for discrete data. Control charts are effective for improving productivity, preventing defects, and providing diagnostic information about a process.

Uploaded by

Nikhil Prasanna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
31 views

Control Charts

Control charts are a statistical process control tool used to monitor processes and identify assignable causes of variation. A control chart displays sample data over time with upper and lower control limits. If data points fall outside the control limits or form certain patterns, it indicates the process is out of control and assignable causes should be addressed to improve process stability and reduce variability. Common types of control charts include variables charts for continuous data and attributes charts for discrete data. Control charts are effective for improving productivity, preventing defects, and providing diagnostic information about a process.

Uploaded by

Nikhil Prasanna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 11

Control Charts

Statistical Process Control

• Statistical process control is a


collection of tools that when used
together can result in process stability
and variance reduction.
• A control chart is one of the tools used
in statistical process control.

2
Introduction to Control Charts

Basic Principles
A typical control chart has control limits set at values
such that if the process is in control, nearly all points
will lie within the upper control limit (UCL) and the
lower control limit (LCL).

Figure 1 A typical control chart.

3
Introduction to Control Charts

Basic Principles

where
k = distance of the control limit from the center line
w = mean of some sample statistic, W.
w = standard deviation of some statistic, W.

4
Introduction to Control Charts

Basic Principles
Important uses of the control chart
1. Most processes do not operate in a state of statistical
control
2. Consequently, the routine and attentive use of control
charts will identify assignable causes. If these causes
can be eliminated from the process, variability will be
reduced and the process will be improved
3. The control chart only detects assignable causes.
Management, operator, and engineering action will be
necessary to eliminate the assignable causes.
5
Introduction to Control Charts

Basic Principles
Types of control charts
• Variables Control Charts
– These charts are applied to data that follow a
continuous distribution.
• Attributes Control Charts
– These charts are applied to data that follow a
discrete distribution.

6
Introduction to Control Charts

Basic Principles
Popularity of control charts

1) Control charts are a proven technique for improving


productivity.
2) Control charts are effective in defect prevention.
3) Control charts prevent unnecessary process adjustment.
4) Control charts provide diagnostic information.
5) Control charts provide information about process
capability.

7
Introduction to Control Charts

Analysis of Patterns on Control Charts

Western Electric Handbook Rules


A process is considered out of control if any of the
following occur:
1) One point plots outside the 3-sigma control limits.
2) Two out of three consecutive points plot beyond the 2-
sigma warning limits.
3) Four out of five consecutive points plot at a distance of
1-sigma or beyond from the center line.
4) Eight consecutive points plot on one side of the center
line.
8
Introduction to Control Charts

Analysis of Patterns on Control Charts

Figure 2 The Western Electric zone rules.


9
Introduction to Control Charts

Analysis of Patterns on Control Charts

Figure 3 X-bar control chart.


10
Introduction to Control Charts

Analysis of Patterns on Control Charts

Figure 4 An X-bar chart with a cyclic pattern.


11

You might also like