Chapter 6 Lecture

Pearson Physics

Work and Energy

Prepared by
Chris Chiaverina

© 2014 Pearson Education, Inc.

 Chapter Contents

• Work
• Work and Energy
• Conservation of Energy
• Power

© 2014 Pearson Education, Inc.

 Work

• While most people feel that work is done when

you "work on a problem" or "do homework,"
physicists say work has only been done when a
force is applied to an object and the object
moves in the direction of the applied force.

© 2014 Pearson Education, Inc.

© 2014 Pearson Education, Inc.

 Work

• The figure below illustrates work being done as

a force pushes a box through a displacement.
The work done equals W = Fd.

• The dimensions of work are force (newtons

times distance (meters). The product of the two,
N·m, is called the joule, in honor of physicist
James Prescott Joule.
© 2014 Pearson Education, Inc.
 Work

• A joule represents a relatively modest amount of

work. You do a joule of work when you lift a
medium-sized apple through a height of 1 meter.
• The table below provides some examples of
typical amounts of work.

© 2014 Pearson Education, Inc.

 Work

• It may come as a surprise that no work is done

while holding a heavy object such as a suitcase.
• By the definition of work, because the suitcase
doesn't move, no work is done. However, you
become tired because your muscle cells are
doing work holding the suitcase.

© 2014 Pearson Education, Inc.

 Work

• Work is easily calculated when the force and

displacement are in the same direction, but how
is work calculated when the force is at an angle
to the displacement?
• The figure below shows a person pulling a
suitcase at an angle θ with respect to the
direction of motion.

© 2014 Pearson Education, Inc.

 Work

• In a case such as this, only the component of the

force in the direction of the displacement does
work.
• Notice in the previous figure that the component
of force in the direction of displacement is F
cosθ. Therefore, the work equals Fd cosθ.

© 2014 Pearson Education, Inc.

© 2014 Pearson Education, Inc.

 Work

• Work can be positive, negative, or

zero.
– Work is positive if the force has a
component in the direction of
motion (Figure a).
– Work is zero if the force has no
component in the direction of
motion (Figure b).
– Work is negative if the force has
a component opposite the
direction of motion (Figure c).
© 2014 Pearson Education, Inc.
 Work

• When more than one force acts on an object,

the total work is the sum of the work done by
each force separately.
• For example, if does work W1, force does
work W2, force does work W3, and so on, the
total work equals

Wtotal = W1 + W2 + W3 + …

© 2014 Pearson Education, Inc.

 Work and Energy

• When work is done on an object, the object's

energy changes. For example:
– When you push a shopping cart, your work
goes into increasing the cart's kinetic energy.
– When you climb a mountain, your work goes
into increasing your potential energy.
• Thus kinetic energy is energy of motion;
potential energy is the energy of position or
condition.

© 2014 Pearson Education, Inc.

 Work and Energy

• Newton's laws and the equations of motion may

be used to derive a relationship between work
and energy.
• In the figure below, a box is pushed across an
ice-skating rink with a force F. Let's see how this
force changes the box's energy.

© 2014 Pearson Education, Inc.

 Work and Energy

© 2014 Pearson Education, Inc.

© 2014 Pearson Education, Inc.

 Work and Energy

• From the relationship , we see

that the work done on the box (or on any other
object) is related to the quantity .
• The quantity is defined as the kinetic
energy, or KE, of an object of mass m and speed
v.

© 2014 Pearson Education, Inc.

© 2014 Pearson Education, Inc.

 Work and Energy

• In general, the kinetic energy of an object is the

energy due to its motion.
• Kinetic energy is measured with the joule, the
same unit used to measure work.
• The following table provides some examples of
typical kinetic energies.

© 2014 Pearson Education, Inc.

 Work and Energy

• The kinetic energy increases linearly with the

mass and with the square of the velocity, as the
following example indicates.

© 2014 Pearson Education, Inc.

© 2014 Pearson Education, Inc.

 Work and Energy

• As the equation indicates, the

total work done on an object equals the change
in its kinetic energy. This connection is known as
the work-energy theorem:

© 2014 Pearson Education, Inc.

© 2014 Pearson Education, Inc.

 Work and Energy

• The following example shows how work is

related to the change in kinetic energy.

© 2014 Pearson Education, Inc.

© 2014 Pearson Education, Inc.

 Work and Energy

• The sign of the work is related to the change in

kinetic energy:
– If the total work is positive, then the kinetic
energy increases.
– If the total work is negative, then the kinetic
energy decreases.
– If the total work is zero, then there is no
change in kinetic energy.

© 2014 Pearson Education, Inc.

 Work and Energy

• The following example illustrates how the work-

energy theorem may be applied when an object
has an initial speed.

© 2014 Pearson Education, Inc. © 2014 Pearson Education, Inc.

 Work and Energy

• As the figure below indicates, work must be

done to lift a bowling ball from the floor onto a
shelf.
• Even though the ball has no kinetic energy once
it's resting on the shelf, the work done in lifting
the ball is not lost—it is stored as potential
energy.

© 2014 Pearson Education, Inc.

 Work and Energy

• Energy that is stored for later use is referred to

as potential energy, or PE.
• Potential energy has several forms, one of which
is gravitational potential energy.
• The gravitational potential energy equals the
work required to lift an object to a given height.
• Lifting a mass m from the ground to a height h
requires a force mg. Thus the work done, and
the potential energy acquired, equals force times
distance, or
W = mgh
© 2014 Pearson Education, Inc.
 Work and Energy

© 2014 Pearson Education, Inc.

• The following example shows how the

gravitational energy is calculated.

© 2014 Pearson Education, Inc.

© 2014 Pearson Education, Inc.
 Work and Energy

• Objects like rubber bands and springs that

return to their original size and shape after being
distorted are said to be elastic.
• Stretching a spring requires work. This work is
stored in the stretched spring in the form of
potential energy.
• The potential energy stored in a distorted elastic
material is referred to as elastic potential energy.

© 2014 Pearson Education, Inc.

 Work and Energy

• When a spring is stretched by a distance x, the

force exerted on the spring increases uniformly
from 0 to kx, where k is the spring constant.
• Thus, the average force is exerted on the spring
is .
• Since the average force is , the work done in
changing the length of the spring is the average
force times the distance, or

• This work is stored as elastic potential energy.

© 2014 Pearson Education, Inc.

 Work and Energy

© 2014 Pearson Education, Inc.

• The following example shows how elastic

potential energy is calculated.

© 2014 Pearson Education, Inc.

© 2014 Pearson Education, Inc.
 Conservation of Energy

• Energy takes many forms: mechanical, electrical,

thermal, and nuclear.
• Any time work is done, energy is transformed from one
form to another.
• One process might transform some kinetic energy into
electrical potential energy; another might transform some
spring potential energy into kinetic energy.
• However, no matter what the process, the total amount
of energy in the universe remains the same. This is what
is meant by the conservation of energy.
• To say that energy is conserved means that energy can
never be created or destroyed—it can only be
transformed from one form to another.
© 2014 Pearson Education, Inc.
 Conservation of Energy

• When frictional forces act on a system, such as when a

car's brakes are applied, kinetic energy is transformed
into thermal energy.
• In situations where all forms of friction can be ignored,
no potential or kinetic energy is transformed into thermal
energy. In this ideal case, the sum of the kinetic and
potential energies is always the same.
• The sum of the kinetic and potential energies of an
object is referred to as its mechanical energy. Thus,
mechanical energy = potential energy + kinetic energy
E = PE + KE
• This means that mechanical energy is conserved.

© 2014 Pearson Education, Inc.

 Conservation of Energy

• Energy conservation may be used to solve many physics problems.

• For example, energy conservation may be used to find the final
speed of a set of keys dropped to the floor from a height h (see
figure below).

• By equating the initial potential energy at the top (mgh) to the final
kinetic energy at the bottom and solving for the speed of the
keys at the bottom, we find

© 2014 Pearson Education, Inc. © 2014 Pearson Education, Inc.

 Conservation of Energy

• The conservation of energy means that objects moving

downward through the same vertical distance but
following different paths will have the same final speed.

© 2014 Pearson Education, Inc. © 2014 Pearson Education, Inc.

 Conservation of Energy

• Changing the initial

speed of a downward
moving object by a
small amount can
result in a relatively
large increase in final
speed.

© 2014 Pearson Education, Inc.

© 2014 Pearson Education, Inc.
 Power

• Power is a measure of how quickly work is done.

The faster work is done, the greater the power.
• Formally, power is the amount of work done in a
given amount of time. If work W is done in time t,
then the power delivered is defined as follows:

© 2014 Pearson Education, Inc.

© 2014 Pearson Education, Inc.

 Power

• To be powerful, an engine must produce a

substantial amount of work in a relatively short
time. Similarly, you produce more power when
running up a flight of stairs than when walking
up.

© 2014 Pearson Education, Inc.

 Power

• The unit of power is the watt (W). The watt,

named after Scottish engineer James Watt, is
defined as 1 joule per second. Thus,
1 watt = 1 W = 1 J/s
• A typical compact fluorescent lightbulb has a
power of 23 W.
• Another familiar unit of power is the horsepower
(hp). The horsepower is defined as follows:
1 horsepower = 1 hp = 746 W

© 2014 Pearson Education, Inc.

 Power

• Human power output is limited to about 1 hp.

• A leisurely walk up a flight of stairs requires
about 130 W, or 1/6 hp. A person running up the
same stairs might be able to produce a little over
hp.
• Examples of power appear in the table below.

© 2014 Pearson Education, Inc.

 Power

• Power output is an important factor in the performance of

a car.
• The greater the power, the less the time it takes a car to
accelerate.
• Power depends on force and speed. As a car travels a
distance d, the work done by the engine W = Fd, and the
power it delivers is

• Therefore, power is equal to force times speed.

v
F

© 2014 Pearson Education, Inc.

© 2014 Pearson Education, Inc.