water quality

criteria& parameters

8th EE
Civil Department – QCET Sahiwal
Water Quality Criteria & Standards:

Water can be brought into different uses

 Water supply: municipal and industrial
 Recreational: swimming, boating etc
 Fisheries: commercial & sports
Each use of water requires a specific quality if that use is to be
continued.

Water Quality: define those chemical, physical and biological

characteristics by which we can evaluate the acceptability of water
for a particular use.

Common Impurities of Water & their Effects:

Impurities

1. Suspended 2. Dissolved
1. Suspended Impurities:

Bacteria some cause disease

Algae, Protozoa colour, odours, taste, turbidity disease

Silts turbidity

2. Dissolved Impurities:
(a) Salts:
Fe, Ca, Mg cause hardness
SO4 laxative effects
Fe, Mn colour, hardness, taste
Fluoride dental Fluorosis if > 0.5 mg / l
(Fluorosis = mottling of teeth) (cheetay nishan)
Lead Neurological disorders, stomach upsets

(Neurological = pertaining to nervous system including brain &

spinal chord – harram maghs)
Iodide cause Goiter (if < 1 mg /l) – increment of thiride
glands
Nitrates “Blue Babies” (disease in kids less than 2 months)

(b) Gases:
Oxygen corrosiveness to metals
CO2 provide acidity
H 2S odour (smell)

Potable Water: Water which is safe to drink, pleasant to taste and usable
for domestic purposes is called potable water.
Whereas, contaminated / polluted water is one which contain
pathogenic micro-organism, chemicals, sewage, industrial or other
wastes.

Water Borne Diseases: Communicable diseases which may be

transmitted by water are called water borne diseases. These may be
bacterial, viral or protozoal infections.
•Bacterial Disease: typhoid, paratyphoid, cholera, bacillary dysentery()
There are 50 water borne diseases.
•Viral Diseases: infectious hepatitis (jaundice), polio, gastroenteritis
(Gastroenteritis = inflammation(soojhan) of inner lining of stomach /
intestine)
•Protozoal Disease: Amoebic dysentery
Water bacteria may be
• Pathogenic (disease causing)
• Non- Pathogenic
Ground water is generally free of bacteria
Surface water contain bacteria

W.H.O Guidelines for Drinking Water:

Primary aim of these guidelines for drinking water quality is the
protection of public health and diminution or reduction to a minimum of
constituents of water that are known to be hazardous to health.
Another aim of these guidelines was to provide a baseline for the
developing countries to develop their own National Standards.
Till-to-date Pakistan has not developed its national drinking water
quality standards and is following the W.H.O guidelines.
W.H.O guidelines can be categorized under 3 major headings:

1. Microbiological Quality:
It is the most sensitive parameter for drinking water.
Bacterial quality is indicated by INDICATORS i.e.
COLIFORM and E-Coli. Both these bacteria live in human intestine
and are excreted with human faeces in large numbers.
E-Coli 5 million to 500 million / gm of faeces
Coliform 25000 to 500,000 / ml of sewage
NOTE: Coliform and E-Coli itself are not disease causing.

Table: W.H.O Guidelines for Microbiological Quality

Organism Unit Guideline Remarks
value
E-Coli No / 100 0
ml
Coliform No / 100 0 In 95% of samples examined
ml in 1 year
Coliform No / 100 3 In an occasional sample but
ml not in two consecutive
samples
2. Organic & In-organic Constituents of Health Significance:

Unit Guideline Effects

Constituents value
Arsenic mg / L 0.05 Skin & other cancers
Chromium mg / L 0.05 Skin allergy, cancer,
damage kidneys
Cyanide mg / L 0.1 Effect thyroid & nervous
system
Fluoride mg / L 1.5 Dental problems
Lead mg / L 0.05 Toxic to nervous system,
stomach upset
Mercury mg / L 0.001 Effect brain
Nickle mg / L 0.02 Carcinogenic(cancer)
Benzene mg / L 10 Leukemia, blood cancer
3. Aesthetic Quality:

Constituent Unit Guideline value

Turbidity NTU(nephlometri 5
c trubidity unit)
Taste & odour In-offensive to most
consumers
TDS(total mg / L 1000
desolved
solids)
Sodium mg / L 200
Hardness mg / L as CaCO3 500
pH 6.5 – 8.5
Iron mg / L 0.3
Sulphate mg / L 400
Water quality parameters
 Quality :degree of excellence, a measure of fitness of use
Physical parameters

Taste & odour Colour

 Organics, Biological  Organic matter, metals

activity, industrial (iron, manganese) or
pollution highly coloured industrial
waste
 Inorganic compounds of
metals like sodium,
copper, iron and zinc
Turbidity
 Optical property
 Caused by suspended matter (clay, organics,
microorganism)
 High level turbidity shield and protect bacteria from the
action of disinfecting agents
 Nephelometer turbidity unit

 Desirable limit – 5 NTU

should be below 1 NTU when disinfection is practiced

Permissible limit – 10 NTU
Total dissolved solids
 Inorganic salts and few organics
 Time of year, local geological conditions, climate, waste
discharges
 Aesthetic standards

TDS(mg/l)
Brackish water 1000-5000
Saline water 5000-30000
Seawater 30000-35000
Rivers & lakes <200
Irrigation water 1500
EPA environment 500
protection agencr
Conductivity

 Measure of electrolyte content / TDS

 Units: μsiemens/cm or μmho/cm

 TDS(mg/l)=k x EC (μmho/cm) (k=0.5-0.9;0.64)

Chemical parameters
pH

 It is the measure of hydrogen ion concentration

 Desirable limit 6.5-8.5

 Factors: bed-rock, acid rain, wastewater discharge

Definitions of pH
 pH stands for power of
Hydrogen
 pH is a value that
represents the how acidic a
solution is.
 pH is the negative log of
the hydronium
concentration. (pH = -log
[H3O+])
 pH calculations are used to
determine the exponent of
the hydronium (H3O+)
concentration without the
negative.
 Concentration & pH

 The pH and the exponent are the same

 As pH increases by 1.0, the hydronium concentration
decreases by 10
pH Illustration
NOTE: [ ] means mol/L

Beaker # 1 Beaker # 2 Beaker # 3

pH = 1.0 pH = 2.0 pH = 3.0
[1 x 10-1] [1 x 10-2] [1 x 10-3]
1/10 1/100
Calculating pH
 Determine the pH of a sample of rainwater that has a hydronium-ion
concentration, [H3O+(aq)], of 1.00 x 10-4 mol/L.

pH=-log10[H3O+(aq)] = -log10[1.00x 10-4]

= 4.000

 Calculate the hydronium-ion concentration, [H3O+(aq)] in a

shampoo with a pH of 5.72.

[H3O+(aq)] = 10-pH= 10 -5.72

= 1.905…x 10-6 mol/L = 1.9 x 10-6 mol/L
 Determine the missing values

sample [H3O]+ pH

Rainwater 1.00x 10-4

Shampoo 5.72
HCl 0.5
Acetic acid 1.31x 10-3

Soil solution 4.7

 Determine the missing values

sample [H3O]+ pH

Rainwater 1.00x 10-4 4

Shampoo 1.9 x 10-6 5.72
HCl 0.5 0.3
Acetic acid 0.0013 2.89
Soil solution 2 x 10-5 4.7
Chemical paramters :Hardness
 Salts of polyvalent cations (Ca,Mg,Fe,Mn,Al,Cu,Ba,Zn,Pb)
 Scale formation, prevents lather

 Temporary hardness. Ca/Mg(HCO3)2

H2O(l) + CO2(g) + CaCO3(s)  →Ca(HCO3)2(aq)

H2O(l) + CO2(g) + MgCO3(s)  → Mg(HCO3)2(aq)

 Permanent hardness-Cl-1,NO3-1, SO4-2

aq. + CaSO4(s)  →Ca2+(aq) + SO42-(aq)

aq. + MgSO4(s)  →Mg2+(aq) + SO42-(aq)
Problem 1
A sample of water on analysis gave the following
results:CaCO3= 2.5 g/l,MgSO4= 1 g/l,CaSO4= 0.5
g/l,MgCl2= 0.25 g/l,Fe2O3= 0.01 g/l, SiO2= 0.25 g/l

Calculate the total hardness in g/l

Problem 1
A sample of water on analysis gave the following
results:CaCO3= 2.5 g/l,MgSO4= 1 g/l,CaSO4= 0.5
g/l,MgCl2= 0.25 g/l,Fe2O3= 0.01 g/l, SiO2= 0.25 g/l
Calculate the total hardness in g/l

Hardness Amount MF Eq of CaCO3

(g/l)
CaCO3 2.5 100/100 2.5
MgSO4 1 100/120 0.83
CaSO4 0.5 100/136 0.37
MgCl2 0.25 100/95 0.26

Total hardness=3.96g/l
Problem 2
 Calculate the temporary hardness and total hardness of
water in mg/l

Hardness Amount MF Eq of CaCO3

(mg/l)
Ca(HCO3)2 16.2
Mg(HCO3)2 7.3
CaSO4 13.6
MgCl2 9.5

H=1,C=12,O=16, N=14, Mg = 24, K = 39, Cl=35.3, Ca= 40,S=32

Problem 2
 Calculate the temporary hardness and total hardness of
water in mg/l

Hardness Amount MF Eq of CaCO3

(mg/l)
Ca(HCO3)2 16.2 100/162 10
Mg(HCO3)2 7.3 100/146 5
CaSO4 13.6 100/136 10
MgCl2 9.5 100/95 10

H=1,C=12,O=16, N=14, Mg = 24, K = 39, Cl=35.3, Ca= 40,S=32

Problem 3

 Calculate the temporary hardness permanent hardness

and total hardness of water in mg/l

Hardness Amount Molecular MF Eq of CaCO3

(mg/l) mass
(g/mol)
Ca(HCO3)2 26.4
Mg(HCO3)2 13.8

CaSO4 15.5
MgSO4 6.5
MgCl2 20
CaCl2 15
Problem 3
 Calculate the temporary hardness permanent hardness
and total hardness of water in mg/l
Temporary hardness=25.75 mg/l ; Permanent hardness=51.36 mg/l

Hardness Amount Molecular MF Eq of CaCO3

(mg/l) mass
(g/mol)

Ca(HCO3)2 26.4 162 100/162 16.3

Mg(HCO3)2 13.8 146 100/146 9.45

CaSO4 15.5 136 100/136 11.4

MgSO4 6.5 120 100/120 5.42
MgCl2 20 95 100/95 21.05
CaCl2 15 111 100/111 13.51
ALKALINITY

 Capacity to neutralize acid

 Presence of carbonates, bi-carbonates and hydroxide

compounds of Ca, Mg, Na and K

 Alkalinity = hardness, Ca and Mg salts

 Freshwater =30-130mg/l as CaCO3

Metals & non-metals
Iron

 Earth’s most plentiful resource(35% mass)

 High iron causes brown or yellow staining of laundry,

household fixtures

 Metalic taste, offensive odour

 Cause iron bacteria

 Acceptable limit – 0.3 mg / l

 Metals & non-metals

As Heavy metals

 Ground water from arseniferous  Present as mineral in soil and rocks

belt
of earth
 Industrial waste, agricultural
insecticide  Human activities
Battery – Lead & Nickel
 Effects : dermatological lesions,
muscular weakness, paralysis of Textile - Copper
lower limbs, can also cause skin
and lung cancer Photography – Silver

 Acceptable limit – 0.05 mg / l

Metals & non-metals
Chlorides Nitrates

 Dissolution of salt deposit  Agricultural fertilizers,

 Discharge of effluents manure, animal dung,
nitrogenous material ,sewage
 Intrusion of sea water
pollution
 Not harmful to human beings  blue baby disease to infants
 Regarding irrigation – most  Maximum permissible limit 50
troublesome anion
mg / l
 Acceptable limit - 250 mg/l
FLOURIDE
 Occurs naturally

 Long term consumption above permissible level can cause – dental

flurosis (mottling of teeth)
-Skeletal flurosis

 Maximum permissible limit – 1.5 mg / l

 Remedy – 1) Deflouridation
2) Mixing Fluoride free water
3) Intake of vitamin C,D, calcium
Microorganisms
 Virus:obligate parasites, 0.01 and 0.03 μm

 Bacteria: single cell (spherical,rod shaped or spiral) 0.1

to 15 μm-pipe corrosion, taste & odour)

 Protozoa: unicellular, nonphotsynthetic, aerobic ;2-

200μm

 Helminths :parasitic worms

Source: water ,vegetables

Control: filtration,coagulation
Radiological activity
 Disintegration of unstable nuclei
 Alpha emission

 Beta emission
 Alpha and beta activity

 Natural radionuclides (uranium thorium) in soil

 1 Becquerel =1 radioactive decay/second

 Gross α activity=0.1 Bq/l; Gross β activity=1 Bq/l