0% found this document useful (0 votes)
148 views

Definition and Fundamental Principles of Remote Sensing: Definitions

Remote sensing involves gathering information about objects from a distance, without physical contact. It uses sensors to measure properties of electromagnetic energy reflected or emitted from objects. The key components of remote sensing are an energy source like the sun, a sensor to detect energy, and a platform to carry the sensor. Remote sensing provides synoptic views of large areas, allows data collection from inaccessible regions, and detects changes over time. It is useful for applications like land use planning and mineral exploration when combined with other geospatial data in a GIS.
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
148 views

Definition and Fundamental Principles of Remote Sensing: Definitions

Remote sensing involves gathering information about objects from a distance, without physical contact. It uses sensors to measure properties of electromagnetic energy reflected or emitted from objects. The key components of remote sensing are an energy source like the sun, a sensor to detect energy, and a platform to carry the sensor. Remote sensing provides synoptic views of large areas, allows data collection from inaccessible regions, and detects changes over time. It is useful for applications like land use planning and mineral exploration when combined with other geospatial data in a GIS.
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 23

Lecture 1

Definition and Fundamental Principles


of Remote Sensing

 Definitions:
 Gathering information from a distance – devoted
to the observation of the earth’s land and water
surfaces by means of reflected or emitted
electromagnetic energy;

 “The measurement or acquisition of information


of some property of an object or phenomenon,
by a recording device that is not in physical
contact with the object or phenomenon under
study”
-Colwell, 1983

Intro. Remote Sensing 1


 Using sensors other than (or in addition to) a
conventional camera through which scenes are
recorded using electronic scanning, radiation
outside the normal visual range, radar, thermal,
infrared, ultraviolet and multi-spectral ranges with
special techniques applied to process and
interpretation of images. (American Society of
Photogrammetry);

Intro. Remote Sensing 2


Intro. Remote Sensing 3
 History of Remote Sensing:
• 1800 – Discovery of infrared by Sir William
Herschel;
• 1839 – Beginning of practice of photograph;
• 1850-1860 – Photography from balloons;
• 1873 – Theory of electromagnetic energy
developed by James Maxwell;
• 1909 – Photography from airplanes;
• 1914-1918 – WW I; Aerial reconnaissance;
• 1920-1930 – Development and initial applications
of aerial photography and photogrammetry;
• 1929-1939 – Economic depression,
environmental crisis leading to Govt. application
of aerial photography;
Intro. Remote Sensing 4
• 1930-1940 – Development of radar in Germany,
USA, and UK;
• 1940-1950 – WW II: application of nonvisible
portion of the electromagnetic spectrum; training of
persons in acquisition and interpretation of air
photos;
• 1950-1960 – Military research and development
• 1960-1970 – First use of the term “remote sensing”
– TIROS weather satellite; Skylab remote sensing
observations from space;
• 1972 – Launching of Landsat 1 – the first
systematic repetitive observation of the earth’s land
area;
• 1970-1980 – Rapid advances in digital image
processing;
• 1980-1990 – Landsat 4: new generation of Landsat
sensors;

Intro. Remote Sensing 5


• 1986 – SPOT French Earth observation satellite;
• 1980s – Development of hypospectral sensors;
• 1990s Global remote sensing;
(Campbell, j. 2002)

 GIS and Remote Sensing: Recent History:


 In the past 10-15 years, GIS and RS have matured
as technologies;
 Computer power increased many-fold, and
computers penetrated many new work environments
(like geology);
 Costs of data storage have fallen dramatically;

Intro. Remote Sensing 6


 New technological developments have led to
improved sensor resolution (spatial and
spectral);
 GUIs (Graphical User Interfaces) have made
software easier (sometimes) to use;
 Low-cost desktop GIS/RS software programs
were developed;
 Development of the Global Positioning System
(GPS);

Intro. Remote Sensing 7


 Components of Remote
Sensing:
 An energy source: Sun -
the main energy source;
- Passive systems:
measurement of natural
radiation such as reflected
sunlight;
- Active systems: RS
systems carrying its own
source of electromagnetic
energy e.g. radar - not
meteorological dependent

Intro. Remote Sensing 8


 Propagation medium: The atmosphere through
which energy passes
- The ability of the atmosphere to transmit and
block electromagnetic energy is important in
remote sensing accuracy;
 Energy detector or sensor: The principal
physical basis for RS is the capacity of sensor
instruments to measure spectral, spatial, and
temporal variation in the energetic bodies;
- Films and detectors developed to measure
electromagnetic energy of various wavelengths
and under various conditions;
- The property of an object measured by the type
of radiation coming from it;

Intro. Remote Sensing 9


 A Platform: The location of sensors;
- Aircrafts at various heights above the earth;
- Spacecraft and satellites in earth orbit; and
- Ground platforms on the earth’s surface;
 Data handling: Analysis and data reduction of
data collected in the form of photographs,
imagery, or electrical signals;
- Ground truthing for calibration is a significant
input in data handling;

Intro. Remote Sensing 10


 Key Concepts in RS:
 Spectral differentiation:
• RS depends on observing spectral differences in
energy reflected or emitted from objects of
interest;
• Based on the principle of multispectral RS;
• “Spectral signature” refers to the response of a
feature as observed over a range of wave lengths;
 Radiometric differentiation:
• The dependence on the detection of differences in
brightness of objects and features;

Intro. Remote Sensing 11


• Recording contrast to derive
information about an object;
 Spatial differentiation:
• Sensors limited in the size of the
smallest area that can be
separately recorded on an
image – resolution;
• Determines spatial detail;
• Picture elements (pixels) –
smallest area units identifiable
on an image;
- Discrete, distinct units
represented by a digital number;

Intro. Remote Sensing 12


 Geometric transformation:
• Remotely sensed image represents a
landscapes in a specific geometric relationship;
• Operation condition, topographic relief, type of
instrument – factors determining geometric
relationships;
• Position error resulting from the motion of
scanning, relief, earth curvature, and the
perspective view of the instrument;
- results in geometric error which must be taken
into account before use in measuring areas and
distances;

Intro. Remote Sensing 13


 Interchangeability of pictorial and digital
formats:
• Photographic-like images can be represented in
digital format by creating pixels and representing
the brightness of these by discrete values;
• Digital images can also be displayed as pictorial
images;
 The Atmosphere:
• Energy reaching the RS system passes through
the atmosphere;
• Particles and gasses in the atmosphere alters
the intensity and wavelength of the sun’s energy
– degrading images or influencing accuracy of
interpretation;

Intro. Remote Sensing 14


 Remote Sensing Processes:
• Problem identification;
• Data collection;
• Data analysis;
- Analog (visual) Image processing;
- Digital image processing
 Preprocessing – geometric correction or
rectification, radiometric correction;
 Information enhancement – image reduction,
magnification, transect extraction, principle
component analysis and texture transformation;

Intro. Remote Sensing 15


 Information extraction – using primary
elements of tone and color of image
pixels;
• Information Output
 Combination with other data to address
specific problems e.g. land-use planning,
mineral exploration ect.
 Combination with other geospatial data e.g.
GIS – soils, geology, transportation network to
guide site location analysis

Intro. Remote Sensing 16


 Remote Sensing Overview
 Physical Objects:
• Buildings, vegetation, soil, water etc.
 Sensor data:
• Instruments used to view the physical objects
by recording electromagnetic radiation emitted
or reflected;
 Extracted information:
• Transformation of sensor data designed to
reveal specific kinds of information;
- Images interpreted to provide information
about soils, land-use, hydrology ect.

Intro. Remote Sensing 17


 Application:
• Combining RS with other data to address specific
practical problem

Intro. Remote Sensing 18


Remote Sensing Overview

Intro. Remote Sensing 19


Remote Sensing Overview

Intro. Remote Sensing 20


 Why is Remote Sensing Useful?
 Large spatial format can give a synoptic view which
is quicker than field reconnaissance with no
temporal variations;
 Can acquire data from inaccessible regions;
 Spectral range of sensors allows for collection of
data in invisible wavelengths;
 Allows for detection of change over time;
 In many professions location in geographic space
is important : (What is the latitude and longitude of
the forest fire? What is the density of pine trees in
my field area? What is the area of a river’s
floodplain, and are there homes and businesses
threatened by floods?

Intro. Remote Sensing 21


 GIS and remote sensing are mapping technologies;
that deal with spatial information;
 “The Best Map is an Image” (Erdas Imagine
software slogan), and maps based on images;

Intro. Remote Sensing 22


 Readings:
 Remote Sensing and Digital Image
Processing. Lillesand and Kiefer,
1989. Pg. 1-9

 Introduction to Remote Sensing. James B.


Campbell. Chapter 1

Intro. Remote Sensing 23

You might also like