Scribd
Upload
269 views

Future Logic GEN2 Course Updated

This document provides information about troubleshooting Future Logic GEN2 ticket printers. It begins by explaining how to decode the serial number to determine the printer's configuration, date of manufacture, and individual unit number. It then discusses warranty information and the differences between RS232 and Netplex printers. The document outlines the various printer components like sensors, jumpers, and dipswitches that determine the communication type and baud rate. It concludes with sections on preventative maintenance, using diagnostic tickets to test the printer, and downloading new firmware or library files.

Uploaded by

pablo bulzomi
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
269 views

Future Logic GEN2 Course Updated

This document provides information about troubleshooting Future Logic GEN2 ticket printers. It begins by explaining how to decode the serial number to determine the printer's configuration, date of manufacture, and individual unit number. It then discusses warranty information and the differences between RS232 and Netplex printers. The document outlines the various printer components like sensors, jumpers, and dipswitches that determine the communication type and baud rate. It concludes with sections on preventative maintenance, using diagnostic tickets to test the printer, and downloading new firmware or library files.

Uploaded by

pablo bulzomi
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 25

Future Logic GEN2 Ticket Printers

Troubleshooting and Repair


Presented by
Serial # Info
Breaking down the serial number in to 4 digit
segments helps to decipher configuration,
date code of the printer and individual unit
number
The first 4 digits in the serial number tell us the
configuration of the printer
0035200708060071 represents Netplex
0183200708060071 also represents Netplex
0037200708060071 represents RS232
0187200708060071 also represents RS232
Serial # Info Cont’d
 The next 2 segments give us the
year, month and day of manufacture
for warranty purposes:
 The second set of 4 digits indicates

the year of manufacture


So 0035200708060071 would be
made in ‘07
Serial # Info Cont’d
 The third set of 4 digits represent the
month/day of Manufacture:
So 0035200708060071 would be a
build date of August 6
 The fourth set of 4 digits represent

the individual unit number:


0035200708060071
Warranty Info
The Warranty is 24 months from the
date of manufacture.
So this printers warranty would expire
when?

0035200708060071
RS232 Printer
 All manufacturers other than IGT
 Uses 12 pin and 14 pin coiled cable

 Dipswitch 2 in ON position to obtain

38,400 baud rate, Dips 1 & 2 on for


9600 baud rate
 Model #PSA-66-ST2R

NOTE: Williams Bluebird uses Netplex


firmware in an RS232 printer
IGT Netplex Printer
 Used only in IGT
 Uses 8 pin coiled cable
 Everything else is the same. The only
differences are the jumper
configuration, coiled cable and the
firmware installed.
 Model #:PSA-66-ST2N
 IGT baud rate is 19,200
Configurations – RS232/Netplex
 Jumpers on motherboard switch the
communications (next to 12 pin Molex
connector)
 Open pins – front: Netplex protocol
 Open pins – back: RS232 protocol
 Coiled Cables:
1. 8 pin – Netplex
2. 12 pin – Standard RS232
3. 14 pin – RS232 (most OEM’s)
Configuration settings
 Jumper settings
will determine
configuration of
RS232 or Netplex
communication
Configuration settings Cont.
 Dip switch settings
allows you to
change the Baud
Rate
 Communication
speed
Motherboards
 Jumpers change
communication
type
 Dip switches, low
paper and door
open sensors are
now located on
motherboard
Motherboard Cont.
 All motherboards come from FLI with
RS232 firmware loaded, even if the
Netplex configuration is ordered
(must always update firmware)
 Some printing issues can be fixed by
re-downloading firmware
• Corrupted SLF file
Motherboard Cont.
 Communication lockup: 2 stages
• Corrupted VFX file
 Soft Lock-all LED’s w/comm.
 Hard Lock-all LED’s w/o comm.
 Lockup is referred as “flushed state”
in Ops and Tech manual
 Use FLI download program to test for
comm.
Overview of Keypad L.E.D.s Status
Reporting
 Refer to tables 2-1 and 2-4 on pages
3 and 4 of GEN2 OPS and Tech
manual for error codes and
description/Remedy

 Print head error is a communication


problem
Sensors
 Door Open Sensor:
On back end of
motherboard – flag
is on the base

 Low Paper Sensor:


In paper tray
(doesn’t stop the
game from
working)
Sensors Cont.
 Paper Present
Sensor: in the top
of the print head,
looks for index
mark on the ticket,
it allows the paper
to stop in the
proper position
Sensors Cont’d
 Paper Chute
Sensor (AKA Paper
Taken Sensor):
Located in the front
(will sound if the
customer doesn’t
take the ticket out)
Sensors Cont.
 Head Up Switch: in
the print mech.
housing. This is a
hard tilt. If the
switch goes bad or
is not activated it
does not allow the
ticket to print
Preventive Maintenance
 Wipe print element and roller with
99.9% Isopropyl alcohol and cotton
swab
 Blow out printer w/compressed air
 Use cleaning card for p.m., if spillage
occurs, if excessive dirt is present,
also if print regions appear to look
faded
Diagnostics
 A Diagnostic Ticket
provides three main
pieces of information:
-Model: either RS232 or
Netplex
-Firmware: ‘VFX File’ The
firmware that is loaded
-Library Inventory:
‘SLF File’ All of the
templates, fonts and
regions
Library Inventories and Firmware
 If pieces of information are missing,
the unit requires a flash download
 Different firmware's are applicable to
different jurisdictions
 Techs need to know their own
jurisdiction, it’s helpful to recognize
others too
Download/Diagnostic Testing
 For download and testing: dipswitch
2 on, all other dipswitches off
 If downloading to RS232 with 9600
baud rate dipswitch 1 must be
turned off, after completed download
turn dipswitch 1 back on for game
communication
 Dipswitch 2 is the standard setting
for communications and testing
Download/Diagnostic Testing
 Laptop Computer/PC
 24VDC power supply
 Connections (harnessing)
• Evaluation cable for RS232
 12 pin or 14 pin
• RS232 to Netplex converter box
 Used for Netplex printers
 Status Viewer program
Diagnostic Testing
 QUESTION: Do you remember baud
rates for RS232, Netplex?
 Status Viewer is very easy to use,
changes in status are ‘real time’
 Testing of printer takes just a few
seconds
THE END

You might also like