Scribd
Upload
76 views

Network Models: Mcgraw-Hill ©the Mcgraw-Hill Companies, Inc., 2004

The physical layer transmits individual bits from one node to the next. The data link layer is responsible for transmitting frames between nodes. The network layer delivers packets from the original source to the final destination.

Uploaded by

Andre Miller
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
76 views

Network Models: Mcgraw-Hill ©the Mcgraw-Hill Companies, Inc., 2004

The physical layer transmits individual bits from one node to the next. The data link layer is responsible for transmitting frames between nodes. The network layer delivers packets from the original source to the final destination.

Uploaded by

Andre Miller
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 30

Chapter 2

Network
Models
McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004
2.1 Layered Tasks

Sender, Receiver, and Carrier

Hierarchy

Services

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Figure 2.1 Sending a letter

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


2.2 Internet Model

Peer-to-Peer Processes

Functions of Layers

Summary of Layers

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Figure 2.2 Internet layers

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Figure 2.3 Peer-to-peer processes

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Figure 2.4 An exchange using the Internet model

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Figure 2.5 Physical layer

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Note:

The physical layer is responsible for


transmitting individual bits from one
node to the next.

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Figure 2.6 Data link layer

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Note:

The data link layer is responsible for


transmitting frames from
one node to the next.

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Figure 2.7 Node-to-node delivery

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Example 1
In Figure 2.8 a node with physical address 10 sends a
frame to a node with physical address 87. The two nodes
are connected by a link. At the data link level this frame
contains physical addresses in the header. These are the
only addresses needed. The rest of the header contains
other information needed at this level. The trailer usually
contains extra bits needed for error detection

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Figure 2.8 Example 1

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Figure 2.9 Network layer

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Note:

The network layer is responsible for


the delivery of packets from the
original source to the
final destination.

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Figure 2.10 Source-to-destination delivery

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Example 2
In Figure 2.11 we want to send data from a node with
network address A and physical address 10, located on
one LAN, to a node with a network address P and
physical address 95, located on another LAN. Because
the two devices are located on different networks, we
cannot use physical addresses only; the physical
addresses only have local jurisdiction. What we need here
are universal addresses that can pass through the LAN
boundaries. The network (logical) addresses have this
characteristic.

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Figure 2.11 Example 2

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Figure 2.12 Transport layer

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Note:

The transport layer is responsible for


delivery of a message from one process
to another.

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Figure 2.12 Reliable process-to-process delivery of a message

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Example 3
Figure 2.14 shows an example of transport layer
communication. Data coming from the upper layers have
port addresses j and k (j is the address of the sending
process, and k is the address of the receiving process).
Since the data size is larger than the network layer can
handle, the data are split into two packets, each packet
retaining the port addresses (j and k). Then in the network
layer, network addresses (A and P) are added to each
packet.

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Figure 2.14 Example 3

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Figure 2.15 Application layer

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Note:

The application layer is responsible for


providing services to the user.

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Figure 2.16 Summary of duties

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


2.3 OSI Model

A comparison

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Figure 2.17 OSI model

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004


Note:

The OSI model is briefly discussed in


Appendix C.

McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

You might also like