0% found this document useful (0 votes)
47 views

Config Router

Uploaded by

Jack Cord
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
47 views

Config Router

Uploaded by

Jack Cord
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 33

Router Components

POST CPU
Bootstrap running- startup-
ROM RAM
config FLASH
IOS NVRAM
config
Mini IOS Console
Interface

Power-On Self-test
Mini IOS used to ROM Monitor > recovery password, upgrade IOS
show configuration
Step config

HyperTerminal COM Console


CRT RJ-45
Rollover CONSOLE
Putty Null-modem

Start  Program  Accessories  Communication  Hyper Terminal


Console Port
Console Port

© 2004, Cisco Systems, Inc. All rights reserved.


6
FastEthernet Port
RJ11
Console Port

Mini USB
Console Port
Console Connection

© 2004, Cisco Systems, Inc. All rights reserved.


11
Router Modes
User vs Privilege EXEC Mode

Router> exit 5 command show


Press RETURN to get started.
Router> enable
Router# 100 command show

Router> (angle bracket sign)


Router# (pound sign)
Router Hostname

Global Configuration Mode


Router# configure terminal
Router(config)# hostname VnPro
VnPro(config)# hostname Cisco
Cisco(config)#
Password Console vs Enable

Router> exit
Password:
Router> enable
Password:
Router#
Router(config)# line console 0
Router(config-line)# password vnpro
Router(config-line)# login
Router(config)# no enable password VnPro

Password có đặ


c tính Case-sensitive
Encrypt Password

VnPro(config)# service password-encryption

VnPro# show running-config


Current configuration : 497 bytes
!
version 12.4
! cisco
hostname VnPro
! MD7
line con 0
cisco
password 7 0822455D0A16
login

--More--
Configure Interface

VnPro(config)# interface fastethernet 0/0


VnPro(config)# interface f0/0
VnPro(config-if)# ip address 10.0.0.1 255.0.0.0
VnPro(config-if)# no shutdown
VnPro(config-if)# end
VnPro#

End = Ctrl + Z
show ip interface brief

Router# show ip interface brief


Interface IP-Address OK? Method Status Protocol

FastEthernet0/0 10.0.0.1 YES mannual up up

FastEthernet0/1 unassigned YES unset administratively down down

Serial0/0/0 unassigned YES unset administratively down down

Serial0/1/0 unassigned YES unset administratively down down

Serial0/2/0 unassigned YES unset administratively down down

Serial0/3/0 unassigned YES unset administratively down down

Router#
Keepalive

10.0.0.1 10.0.0.2

Router# show interfaces f0/0


f0/0 is up, line protocol is up
Hardware is Lance, address is 00e0.1e5d.ae2f (bia 00e0.1e5d.ae2f)
Internet address is 10.0.0.1/8
MTU 1500 bytes, BW 100000 Kbit, DLY 1000 usec, rely 255/255, load 1/255
Encapsulation ARPA, loopback not set, keepalive set (10 sec)
............

Router# ping 10.0.0.2


Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.0.0.10, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
Save Config

wr
write memory
copy run star
VnPro# copy running-config startup-config
Destination filename [startup-config]?
VnPro#
Context-Sensitive Help
Context-Sensitive Help (Cont.)
Erase config & Reload

VnPro# erase startup-config


Erasing the nvram filesystem will remove all
configuration files! Continue? [confirm]
VnPro# reload
Proceed with reload? [confirm]
--- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: no

Ctrl + C để bỏ qua Initial Setup


Note

Router# ping 10.0.0.2


console

Con 0 Com
f0/0 NIC
10.0.0.1 10.0.0.2

C:\> ping 10.0.0.1


logging synchronous

VnPro# configure ter


%SYS-5-CONFIG_I: Configured from console by
console minal
VnPro(config)# line console 0
VnPro(config-line)# logging synchronous

VnPro# configure ter


%SYS-5-CONFIG_I: Configured from console by
console
VnPro# configure ter

no logging console
ip domain-lookup

Router(config)# ip domain-lookup

Router# cont
Translating "cont"...domain server (255.255.255.255)
% Unknown command or computer name, or unable to find computer address
Router#

Router(config)# no ip domain-lookup

Router# cont
Translating "cont"
% Bad IP address or host name% Unknown command or computer name, or
unable to find computer address
Router#

You might also like