Scribd
Upload
91 views

2 Transistor As Amplifier

The document discusses the use of transistors as low power amplifiers. It defines faithful amplification as adding strength to an input signal without changing its shape. A transistor can act as a current amplifier when configured in common emitter mode, with collector current being proportional to base current. A transistor can also act as a voltage amplifier, where the amplified output voltage is out of phase with the input signal voltage due to the constant supply voltage. The document outlines different transistor operating regions and biasing methods required for amplification applications.

Uploaded by

Archana Damral
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
91 views

2 Transistor As Amplifier

The document discusses the use of transistors as low power amplifiers. It defines faithful amplification as adding strength to an input signal without changing its shape. A transistor can act as a current amplifier when configured in common emitter mode, with collector current being proportional to base current. A transistor can also act as a voltage amplifier, where the amplified output voltage is out of phase with the input signal voltage due to the constant supply voltage. The document outlines different transistor operating regions and biasing methods required for amplification applications.

Uploaded by

Archana Damral
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 10

Transistor as an Amplifier

Archana P Ahir
Lecturer in Electronics
Government Polytechnic Khamgaon

Transistoras an amplifier/APAHIR 1
COURSE OUTCOME
 CO-   
USE TRANSISTOR AS LOW  POWER
AMPLIFIER 

Transistoras an amplifier/APAHIR 2
Outline
 Pre-requisite
 Faithfulamplification
 Amplifier definition
 Generalised block diagram of Amplifier
 Transistor as a current amplifier
 Transistor as a voltage amplifier

Transistoras an amplifier/APAHIR 3
Prerequisites
 Different Operating Regions of transistor
S.N Emitter Collector Operating Application
o Base Base region
Junction junction
1 Forward Bias Forward Saturation Closed
Bias Region Switch
2 Forward Bias Reverse Active Amplifier
Bias Region

3 Reverse Bias Reverse Cut off Open Switch


Bias Region

 Transistor biasing methods


Transistoras an amplifier/APAHIR 4
Faithful Amplification and Amplifier
 The Process of adding strength to the input signal without changing its shape is known as faithful

amplification.

 The circuit which amplifies an input signal is called as an amplifier.

 Applications

 TV
 Radio
 PA System
 Instrumentation System

Transistoras an amplifier/APAHIR 5
Block Diagram of Amplifier

Vs : Signal voltage
Rs : Internal resistance of signal source
Is : Signal current
R : Load Resistor
Vo : Amplified output voltage

Transistoras an amplifier/APAHIR 6
Transistor as a current amplifier

In CE configuration,
IC=ꞵ IB ------------------(1)
IC- Collector current
IB - Base current

In CC configuration,
IE=(1+ꞵ) IB ---------------(2)
∵ ꞵ is very large
∴ IE is large
In CB Configuration ,
Ic= αIE --------------------------------(3)
∵ α is less than unity
CB configuration is not used for current amplification

Transistoras an amplifier/APAHIR 7
Voltage Amplifier and Phase reversal

By applying KVL to outer loop,


VCE=VCC – ICRC
When Signal voltage increases in positive direction
∵VCC is constant
∴ VCE increases in negative direction
∴ VCE and signal voltage are out of phase with
each other
Transistoras an amplifier/APAHIR 8
References
  “Principles
of Electronics”,Mehta, V.K., Mehta,
Rohit ,S.Chand, New Delhi, 2014 ISBN:8121924502

 “AppliedElectronics”, Sedha, R.S. S.Chand, New


Delhi,2015 ,ISBN:9788121927833

Transistoras an amplifier/APAHIR 9
Thank you

Transistoras an amplifier/APAHIR 10

You might also like