Scribd
Upload
113 views

DMR Trunking Terminal CPS ProgrammingV1.0

This document provides an overview and instructions for programming DMR trunking terminals using CPS software. It discusses (1) introducing the CPS software and interface, (2) configuring registration and service settings like individual, group, and emergency calls, (3) programming other functions like man down detection and encryption, and (4) conventional radio programming for calls and channels. The goal is for technicians to understand CPS software and programming main DMR trunking terminal services.

Uploaded by

Jose De Pina
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
113 views

DMR Trunking Terminal CPS ProgrammingV1.0

This document provides an overview and instructions for programming DMR trunking terminals using CPS software. It discusses (1) introducing the CPS software and interface, (2) configuring registration and service settings like individual, group, and emergency calls, (3) programming other functions like man down detection and encryption, and (4) conventional radio programming for calls and channels. The goal is for technicians to understand CPS software and programming main DMR trunking terminal services.

Uploaded by

Jose De Pina
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 42

DMR Trunking Terminal CPS Programming

www.hytera.com
Course Overview

1. Technical support engineer


Object
2. Service engineer
3. Sales

1. DMR trunking terminal CPS software introduction


Content
2. DMR trunking terminal service configuration

1. Understand CPS software of DMR trunking terminal.


Goal 2. Grasp the programming for main services of DMR trunking
terminal.

Period: 3 hours
Contents

1 DMR CPS Overview

2 DMR Trunking CPS Programming

3 Other Functions CPS Programming

4 Conventional CPS Programming


DMR CPS Overview

 Preparations for programming


Hardware ： USB Portable radio programming cable, USB mobile radio programming cable,
DMR trunking radio, PC.

PD78X （ G MD78X （ G X1e/X1p


） ）
Software: CPS software, USB driver
DMR CPS Overview

 CPS Version
USB Driver Version
Region CPS Version
32/64 bit (OS)
China V7.00.07.016.CHS
North America & Oceania V7.00.07.016.NA2
Europe, Middle East and Africa
V7.00.07.016.EM5
V5.30.41.0
South and Latin America V7.00.07.016.SA6
ASIAN (except china and Oceania
(Australia &New Zealand) ) V7.00.07.016.AS8

Notes:
For different region customer, we should use the matched CPS version.
DMR CPS Overview

 CPS Interface Introduction


Menu Bar
Tool Bar
Tab View

Tree Bar Config Info

Help View

Status Bar
DMR CPS Overview

 CPS Interface Introduction


Click “Option”- “Preferences”, select “Signaling Type” -“System Type”.
DMR CPS Overview

 CPS Interface Introduction


Contents

1 DMR CPS Overview

2 DMR Trunking CPS Programming

3 Other Functions CPS Programming

4 Conventional CPS Programming


DMR Trunking CPS Programming

 1.Registration
(1) Configure network parameter(network model, system code, control channel category, etc.)

(2) Configure the Hunt parameter (TSCC Plan and channel parameter)

(3)Configure Dial Mode (Radio ID and Dial Rules)


DMR Trunking CPS Programming

 1.Registration
(1) Configure network parameter(network model, system code, control channel category, etc.)
DMR Trunking CPS Programming

 1.Registration
The system code in the radio consists of the Network Model, Network ID and site.
DMR Trunking CPS Programming

 1.Registration
(2) Configure the Hunt parameter (TSCC Plan and channel parameter)
DMR Trunking CPS Programming

 1.Registration
DMR Trunking CPS Programming

 1.Registration
(3)Configure Dial Mode (Radio ID and Dial Rules)
DMR Trunking CPS Programming

 1.Registration
DMR Dial Rule

Private ID/Group ID:NP(1 digit)+UN (6 digits)/GN (6 digits)

NP means the UN means the unit number and GN


number prefix. means the group number.
Range: 0 – 9. Range: 000001 – 999999.
DMR Trunking CPS Programming

 2.Individual Call
Notes: After the radio registered in
system ,in stand-by mode , it can transmit a
call only directly input the called number
and press PTT or select the contact person
from contact list then press the PTT.

inter fleet private call: dial 3 digits user number


cross fleet private call: dial 2 digits fleet number
+ 3 digits user number
cross area private call: dial 3 digits area number
+ 2 digits fleet number + 3 digits user number
DMR Trunking CPS Programming

 3.Group Call
(1)Configure Group Call ID, Group Call Type.

(2) Configure Subgroup.

(3) Configure Subgroup List.


DMR Trunking CPS Programming

 3.Group Call
(1)Configure Group Call ID, Group Call Type.

After the radio registered in system ， we can rotate the channel selected
number to select the called contact person ,then press PTT to transmit a call.

Participant: When the group corresponding to current knob position is set


to "Participant", users can receive/transmit a call from/to the group on
current position only.
Response: Users can receive a call from the response group no matter which
group the knob is turned to.
Background: Users can receive the call from a background group and call
back within the defined time period.
DMR Trunking CPS Programming

 3.Group Call
(2) Configure Subgroup.
DMR Trunking CPS Programming

 3.Group Call
(3) Configure Subgroup List.
DMR Trunking CPS Programming

 4.Packet data Call


Configure the packet data call, such as Long Message, Message With Position, Query Neighbors,
Group Attachment, Data Query, Work Order, OTAP.
DMR Trunking CPS Programming

 5.Broadcast Group Call


In Broadcast Group Call, the caller can only transmit voice signals and the called can only receive
them.
DMR Trunking CPS Programming

 6.Emergency Call
DMR Trunking CPS Programming

 7.Preemption Call
DMR Trunking CPS Programming

 8.All Call
DMR Trunking CPS Programming

 9.Include Call
DMR Trunking CPS Programming

 10.Message- Quick Text


DMR Trunking CPS Programming

 11.Message- Status Message


Contents

1 DMR CPS Overview

2 DMR Trunking CPS Programming

3 Other Functions CPS Programming

4 Conventional CPS Programming


Other Functions CPS Programming

 1.Man Down and Lone Worker


Other Functions CPS Programming

 2.Authentication

Selec E_Key file

E_Key File Password


is 11111111
Other Functions CPS Programming

 3.Encrypt

Select Encrypt Type


Set the Encrypt Service

Select Encrypt Key Length


Other Functions CPS Programming

 4.GPS
Other Functions CPS Programming

 5.Multi-site Handover
Other Functions CPS Programming

 6.Buttons setting
Contents

1 DMR CPS Overview

2 DMR Trunking CPS Programming

3 Other Functions CPS Programming

4 Conventional CPS Programming


Conventional CPS Programming

 Individual call, Group call, All call


(1) Configure individual call ID.

(2)Configure contact list.


Add contact list, select call type. All call has the unique ID.
Conventional CPS Programming

 Individual call, Group call, All call


(3)Configure Rx Group List
Conventional CPS Programming

 Individual call, Group call, All call


(4) Configure Digital Channel
Conventional CPS Programming

 Individual call, Group call, All call


(5) Add the selected channel as members of the Zone.
(6) Write to the radio.
Questions
？

You might also like