Scribd
Upload
88 views

CH 2

This document discusses the first law of thermodynamics and concepts of energy, including: 1) It defines work, kinetic energy, potential energy, and the conservation of energy in mechanics. 2) It discusses how work is done by or on a system, power, and examples of calculating work done by expansion or compression processes. 3) It broadens the understanding of energy to include internal energy, energy transfer by heat, and energy accounting and balances for closed systems.

Uploaded by

جلال بولاد
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
88 views

CH 2

This document discusses the first law of thermodynamics and concepts of energy, including: 1) It defines work, kinetic energy, potential energy, and the conservation of energy in mechanics. 2) It discusses how work is done by or on a system, power, and examples of calculating work done by expansion or compression processes. 3) It broadens the understanding of energy to include internal energy, energy transfer by heat, and energy accounting and balances for closed systems.

Uploaded by

جلال بولاد
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 46

Energy and the

First Law of
Thermodynamics
Reviewing Mechanical Concepts of Energy

Work and Kinetic Energy


Potential Energy
Conservation of Energy in Mechanics
Broadening Our Understanding of Work
The work W done by, or on, a system evaluated in terms of macroscopically
observable forces and displacements is

the thermodynamic definition of work: Work is done by a system on its


surroundings if the sole effect on everything external to the system could have
been the raising of a weight.
Sign Convention and Notation
Power
Ex. Evaluate the power required for a bicyclist traveling at 20 miles per
hour to overcome the drag force imposed by the surrounding air.

This aerodynamic drag force is


where Cd is a constant called
the drag coefficient,
A is the frontal area of the
bicycle and rider,
and r is the air density.
Modeling Expansion or Compression Work
Expansion or Compression Work in Actual processes
Example: A gas in a piston–cylinder assembly undergoes an expansion
process for which the relationship between pressure and volume is
given by

The initial pressure is 3 bar, the initial volume is 0.1 m3, and the final
volume is 0.2 m3. Determine the work for the process, in kJ, if (a) n =
1.5, (b) n = 1.0, and (c) n = 0.
Further Examples of Work

Extension of a Solid Bar


Stretching of a Liquid Film
Power Transmitted by a Shaft
Electric Power
Work Due to Polarization or Magnetization
From the microscopic viewpoint, electrical dipoles within dielectrics resist
turning, so work is done when they are aligned by an electric field. Similarly,
magnetic dipoles resist turning, so work is done on certain other materials
when their magnetization is changed. Polarization and magnetization give rise
to macroscopically detectable changes in the total dipole moment as the
particles making up the material are given new alignments. In these cases the
work is associated with forces imposed on the overall system by fields in the
surroundings.

Forces acting on the material in the system interior are called body forces. For
such forces the appropriate displacement in evaluating work is the
displacement of the matter on which the body force acts.
Broadening Our Understanding of Energy

The change in kinetic energy, associated with the motion of the system as a
whole relative to an external coordinate frame.

The change in gravitational potential energy, associated with the position of the
system as a whole in Earth’s gravitational field.

All other energy changes are lumped together in the internal energy of the
system. Like kinetic energy and gravitational potential energy, internal energy is
an extensive property of the system, as is the total energy.
Internal energy is represented by the symbol U, and the change in internal
energy in a process is U2 - U1.

The specific internal energy is symbolized by u or u respectively, depending


on whether it is expressed on a unit mass or per mole basis.
Energy Transfer by Heat
Sign Convention, Notation, and heat transfer rate
Modes of heat transfer

1) Conduction

Fourier’s law
2) Radiation

Stefan–Boltzmann law
3) Convection

Newton’s law of cooling
Energy Accounting: Energy Balance for Closed Systems
Important Aspects of the Energy Balance

Differential form

Time rate form


Fig. 2.16 Alternative choices for system
boundaries.
Example. Four-tenths kilogram of a certain gas is contained within
a piston–cylinder assembly. The gas undergoes a process for
which the pressure–volume relationship is

The initial pressure is 3 bar, the initial volume is 0.1 m3, and the
final volume is 0.2 m3. The change in specific internal energy of the
gas in the process is u2-u1 = -55 kJ/kg. There are no significant
changes in kinetic or potential energy. Determine the net heat
transfer for the process, in kJ.
Example. Air is contained in a vertical piston–cylinder assembly fitted
with an electrical resistor. The atmosphere exerts a pressure of 14.7 lbf/in.2
on the top of the piston, which has a mass of 100 lb and a face area of 1 ft2.
Electric current passes through the resistor, and the volume of the air
slowly increases by 1.6 ft3 while its pressure remains constant. The mass of
the air is 0.6 lb, and its specific internal energy increases by 18 Btu/lb. The
air and piston are at rest initially and finally. The piston–cylinder material
is a ceramic composite and thus a good insulator. Friction between the
piston and cylinder wall can be ignored, and the local acceleration of
gravity is g = 32.0 ft/s2. Determine the heat transfer from the resistor to the
air, in Btu, for a system consisting of (a) the air alone, (b) the air and the
piston
During steady-state operation, a gearbox receives 60 kW through
the input shaft and delivers power through the output shaft. For the
gearbox as the system, the rate of energy transfer by convection is

where h = 0.171 kW/m2 .K is the heat transfer coefficient, A = 1.0 m2


is the outer surface area of the gearbox, Tb = 300 K (27C) is the
temperature at the outer surface, and Tf = 293 K (20C) is the
temperature of the surrounding air away from the immediate vicinity
of the gearbox.
For the gearbox, evaluate
the heat transfer rate and
the power delivered through
the output shaft, each in kW.
A silicon chip measuring 5 mm on a side and 1 mm in thickness is
embedded in a ceramic substrate. At steady state, the chip has an
electrical power input of 0.225 W. The top surface of the chip is
exposed to a coolant whose temperature is 20C. The heat transfer
coefficient for convection between the chip and the coolant is 150
W/m2 K. If heat transfer by conduction between the chip and the
substrate is negligible,
determine the surface
temperature of the chip, in C.
The rate of heat transfer between a certain electric motor and its
surroundings varies with time as

where t is in seconds and Q is in kW. The shaft of the motor rotates


at a constant speed of ω = 100 rad/s (about 955 revolutions per
minute, or RPM) and applies a constant torque of τ = 18 N.m to an
external load. The motor draws a constant electric power input equal
to 2.0 kW. For the motor, plot Q and W, each in kW, and the change
in energy ∆E, in kJ, as functions of time from t = 0 to t = 120 s.
Discuss.
Energy Analysis of Cycles
A thermodynamic cycle is a sequence of processes that begins and
ends at the same state..
Cycle Energy Balance

1) Power Cycles
2) Refrigeration and Heat Pump Cycles

The objective of a refrigeration cycle is to


cool a refrigerated space or to maintain the
temperature within a dwelling or other
building below that of the surroundings.
The objective of a heat pump is to
maintain the temperature within a dwelling
or other building above that of the surroundings
or to provide heating for certain industrial processes that occur at
elevated temperatures.
Refrigeration Cycles

Heat Pump Cycles


Ex. The refrigerator shown in Fig. P2.90 steadily receives a power
input of 0.15 kW while rejecting energy by heat transfer to the
surroundings at a rate of 0.6 kW. Determine the rate at which
energy is removed by heat transfer from the refrigerated space, in
kW, and the refrigerator’s coefficient of performance.

Ex. Evaluating electricity at 8 cents


per kW.h, determine the refrigerator’s
annual electricity requirement, in kW.h
if the annual cost of electricity is $55.
A concentrating solar collector system, as shown in Fig., provides
energy by heat transfer to a power cycle at a rate of 2 MW. The
cycle thermal efficiency is 36%.
Determine the power developed by the cycle, in MW. What is the
work output, in MW.h, for 4380 hours of steady-state operation? If
the work is valued at $0.08/kW.h, what is the total dollar value of
the work output?

You might also like