Scribd
Upload
60 views

Smart Water Level Tank Monitoring Filling System Using Arduino Powered by Solar and Wind Energy Chapter 1 Finale

This document proposes a thesis to design and construct a smart water level tank monitoring and filling system powered by solar and wind energy using an Arduino board. The system would use solar panels and wind turbines to generate electricity to power the Arduino, which would monitor the water level in a tank and control filling. This has advantages over traditional power sources and could help people save power. The study aims to understand the benefits of the Arduino and renewable energy sources as well as how useful solar and wind energy would be for controlling water filling. The project would benefit engineers, consumers, researchers and future researchers. The scope is limited to the system's use in Pangasinan Province.

Uploaded by

BlackStar Code 27
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
60 views

Smart Water Level Tank Monitoring Filling System Using Arduino Powered by Solar and Wind Energy Chapter 1 Finale

This document proposes a thesis to design and construct a smart water level tank monitoring and filling system powered by solar and wind energy using an Arduino board. The system would use solar panels and wind turbines to generate electricity to power the Arduino, which would monitor the water level in a tank and control filling. This has advantages over traditional power sources and could help people save power. The study aims to understand the benefits of the Arduino and renewable energy sources as well as how useful solar and wind energy would be for controlling water filling. The project would benefit engineers, consumers, researchers and future researchers. The scope is limited to the system's use in Pangasinan Province.

Uploaded by

BlackStar Code 27
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 9

SMART WATER LEVEL TANK

MONITORING FILLING SYSTEM


USING ARDUINO POWERED BY
SOLAR AND WIND ENERGY
A Thesis Proposal
Presented to
The Electrical Engineering Department
College of Engineering & Architecture
PHINMA-University of Pangasinann
In Partial Fulfillment of the
Requirements for the Degree
Bachelor of Science in Electrical
Engineering
 

By :
 Columbino, John Chris M.
 Viray, Jhoe Christian L.
 Calimlim, John Paul F.
 Fernandez, Jeramie P.
 Amante, Julius Jr. L.
 Dalo, John Rick O.
Engr. Franklin Almonte
Thesis Adviser
CHAPTER
1
INTRODUCTION
BACKGROUND OF THE STUDY

Solar energy is a very flexible energy technology: it can be built as distributed generation (located at or
near the point of use) or as a central-station, utility-scale solar power plant (similar to traditional power
plants)

Wind Energy describes the process by which wind is used to generate electricity. Wind turbines convert the
kinetic energy in the wind into mechanical power. 

Arduino is an open-source electronics platform based on easy-to-use hardware and


software and it has been the brain of thousands of projects, from everyday objects to
complex scientific instrument.
INTRODUCTION
BACKGROUND OF THE STUDY

 Arduino boards are relatively inexpensive compared to other microcontroller


platforms.
 Filling water tank using Arduino
 Solar and windmill system
 It also alternative energy
STATEMENT OF THE PROBLEM

Specifically, this study sought to answer the following questions:

This project aims to design and construct a Smart water level tank monitoring filling system using
Arduino powered by solar and wind energy.

 What are the advantages using Arduino System in this study?

 What are the benefits using a wind and solar electricity for whole system?
  
 How useful the Solar and Wind energy controlling Arduino to Filling Water Tank?
 
 
The objective of this study is to improve and
help the people to save power from this project.
Smart water level tank monitoring filling
system using Arduino powered by solar and
wind energy will benefit the following:
 

SIGNIFICANCE OF
THE STUDY
  •Engineers
•Consumers
•Researchers
•Future Researchers
 
SCOPE AND LIMITATIONS
The study focused on how to used the Smart water level tank monitoring filling system
using Arduino powered by solar and wind energy in the Province of Pangasinan.
 
The study was intended for the Engineers and the clients who will use and will benefit the
System.
 
In this study, the system caters and improve the overall energy conversion efficiency. The
System will be used to level out the production of power without spending much energy and
resources.

You might also like