Scribd
Upload
267 views

CO2 Casting

CO2 sand casting is a process where CO2 gas is used to harden sand molds. When sodium silicate bonded sand comes into contact with CO2 gas, it forms a stiff gel that strengthens the mold. Molds can be immediately used after processing. This allows for automated, high-speed production with dimensional accuracy. However, used sand cannot be easily reclaimed and mold mixtures have a shorter bench life than other processes.

Uploaded by

Subhan Shahid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
267 views

CO2 Casting

CO2 sand casting is a process where CO2 gas is used to harden sand molds. When sodium silicate bonded sand comes into contact with CO2 gas, it forms a stiff gel that strengthens the mold. Molds can be immediately used after processing. This allows for automated, high-speed production with dimensional accuracy. However, used sand cannot be easily reclaimed and mold mixtures have a shorter bench life than other processes.

Uploaded by

Subhan Shahid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 6

CO Sodium Silicate Sand

Casting
Introduction
 CO2 Casting is a kind of sand casting process. In this process the
sand moulding mixture is hardened by blowing gas over the mould.
 In addition, one can be sure of getting dimensionally accurate
castings with fine surface finish. But, this process is not economical
than green sand casting process.
 The process is basically a hardening process for moulds and cores.
Process
 The principle of working of the CO2 process is based on the fact that if
CO2 gas is passed through a sand mix containing sodium silicate, the sand
immediately becomes extremely strongly bonded as the sodium silicate
becomes a stiff gel.
 This gel is responsible for giving the necessary strength to the mould.
 When the packing is complete, CO2 is forced into the mould at a pressure
of about 1.45 kgf/cm2(142 kn/m2) . The gas is inert upto 15 to 30
seconds.
 Process
The moulding process which can be fully automated is generally
used for casting process that require speed, high production runs
and flexibility. In home foundries this is one of the simplest process
that improves the casting quality.
Advantages
This process has many advantages in comparison to other forms of
castings some of them are as follows:
 Compared to other casting methods cores and moulds are strong.
 Reduces fuel cost since gas is used instead of to other costly heating
generating elements.
 Operation is speedy. Moulds and cores can be immediately after
processing.
 Great dimensional accuracy can be attained than other moulding or
core making process.
 Semi-skilled labour can be used. This process can be fully
automated.
Disadvantages
 Difficulty in reclaiming used sand.
 Bench life of sand mixtures is much shorter than for most other
mould and core mixes.

You might also like