Scribd
Upload
57 views

A Project Report On: Team Members

This document describes a project report on the fabrication of a solar bike. It includes an abstract that discusses using solar power as an alternative energy source for vehicles to reduce fuel costs and pollution. It then lists the components of the solar bike, which includes flexible solar panels, batteries, a DC hub motor, and other parts. The document discusses how the solar panels charge the batteries to power the motor as well as the advantages and disadvantages of solar bikes.

Uploaded by

Naveen Kumar Agisam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
57 views

A Project Report On: Team Members

This document describes a project report on the fabrication of a solar bike. It includes an abstract that discusses using solar power as an alternative energy source for vehicles to reduce fuel costs and pollution. It then lists the components of the solar bike, which includes flexible solar panels, batteries, a DC hub motor, and other parts. The document discusses how the solar panels charge the batteries to power the motor as well as the advantages and disadvantages of solar bikes.

Uploaded by

Naveen Kumar Agisam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 12

P.V.K.K.

INSTITUTE OF TECHNOLOGY
ANANTAPUR
( APPROVED BY AICTE,NEW DELHI;AFFILIATED TO JNTU ANANTHAPURAMU )

A PROJECT REPORT ON

FABRICATION OF SOLAR BIKE


Under the Guidance of

Mr. S.JITHENDRA NAIK


M.Tech
Associate Professor
DEPARTMENT OF MECHANICAL ENGINEERING
TEAM MEMBERS
D.SAMBA SIVA 203N5A0312

D.SURENDRA 203N5A0310
ABSTRACT :
As we all know the fuel rate like the petrol is increasing price steadily day by day. Again, the pollution due to a vehicle in big
cities and urban areas is increasing continuously. To overcome these problems, an effort is being made to find out next alternative
sources of energy for the vehicles again, it is also not effort to get vehicles (scooters, mopeds or motorcycles) for all the category of
society.

Keeping this in mind, a look for some welcome to cater these economically poor people as well on provide an answer for
the environmental pollution was in progress. the solar operated e-bike developed is driven by “DC hub motor” fit in back axle
housing and operated by solar energy. The solar panels mounted on the extension top of the frame. which in turn drive the hub
motor by using charge the battery when the bike is idle, battery will be charging the battery by the solar. This arrangement will be
substituting the petrol engine, the gear box and the fuel tank in case of a chain sprocket or two-wheeler, chain and gear shifting
arrangement of a traditional bicycle being used by most common man.

As an area of specific work, the solar assisted bike is fitted with a dc hub motor on rear axle of a bike with power rating of
350w and with a travelling speed of around 25-30kemph. it is provided with a pair of lead acid batteries of 22.5 ah each, a
photovoltaic solar battery with capacity of 20 watts, a transformer of 24v 10 amp, accelerator and motor controller of 24v
25amp.There as well a position for charging of the battery with 220-240V ,AC wall out supply just in case of poor solar supply due
to rainy or cloudy weather.

The internet of things(IOT) device is connected to the solar bike and mobile connection also
updated these bike.
LIST OF CONTENT :

 Introduction
 Definition of solar bike
 Components
 Working
 Advantages
 Disadvantages
 Applications
 Conclusion
INTRODUCTION:

Solar bicycle is developed to reduce the pollution caused by conventional


bikes. To develop a low cost application for rural and remote area where fuels are
not available to drive two wheelers so that they can run this bicycle on renewable
solar energy. The solar energy from the sun is free of cost and is used to drive the
motor. When there is no sunlight or the batteries are drained the bicycle should
still be running. The solar bicycle is different from others vehicle. The PV panel save
more power and give the bicycle required range. The solar panel will be charged while
bicycle is running. We can also use pedaling operation when sufficient energy
is not available.
DEFINATION OF SOLAR BIKE :
A solar bike is a bike which runs using the electrical energy of batteries to run
the hub motor which ultimately runs the bicycle. Solar energy is used to charge the
battery. Two photovoltaic cells may be used to harness solar energy to generate

voltage to charge.

COMPONENTS :
 Flexible solar panel

 Batteries

 Dc hub motor

 Suspension spring

 Hub wheel

 Motor controller

 Anti theft alarm security system


FLEXIBLE SOLAR PANEL :

This flexible solar panel is suitable for use in car,


bike and marine applications it is compact and is
to set up.it provides free and clean power during
outdoor activities.

BATTERIES :

A battery is device that stores chemical


energy and converts it to electrical energy.
HUB MOTOR :

A motor is device that changes a form of energy into


mechanical energy to produce motion.

SUSPENSION SPRING:

Suspension systems maximize the friction between


the bike tyres and the road.
HUB WHEEL :

The hub unit is a device that fills an important role in


supporting car and bike by the wheels, and integrates
the bearings and surrounding components

MOTOR CONTROLLER:

Motor controller is a device that regulates the


operation of an electric motor.
ANTI THEFT ALARM SECURITY SYSTEM :

Anti theft systems stops thieves from picking up


your bike if attached to an immovable object.

ADVANTAGES :
 Solar bikes are eco- friendly.
 Solar bikes don’t emit harm.
 No license needed to operate solar bike.
 Less maintains cost compared to petrol bikes.
DISADVANTAGES :
 Less suitable for long trips.
 Sensitive to whether.
 Not suitable for heavy loads.
 It requires regular checkups.

APPLICATIONS :
 It is used in daily life.
 Used in automobile industries.

CONCLUSION :
By using of solar powered bicycles, pollution can be decreased and mainly it will
save large amount fossil fuels it can be used all age group people up to the weight of 120
kg. It can be travel up to 25 to 35 km with one full charge.
In future we can improve speed of the bicycle up to 25 to 30 km/h. Charging time
can be reduced up to 2 to 4 hours.

You might also like