Standards

& Specifications
Introduction
Standard and specification helps to develop common language for developers,
designers, fabricators, purchasers and suppliers, End users.

Standard:- A technical document based on consolidated results of science,

technology and experience approved by a standardizing body for the benefits
of the people.

Standardization:- It is the activity giving solutions for repetitive applications

to problems, essentially in the sphere of science, technology and economics
aimed at the achievement of the optimum degree of order in a given contest.

Technical specification:- A document which lays down characteristics of a

product or a service such as levels of quality performance, safety or
dimensions
Standards
A standard is something established for use as a
basis of comparison in measuring capacity,
quantity, content, extent, value, quality etc.

The ultimate purpose of the standards is to

develop a common language, so that there can be
no confusion among the developers, designers,
fabricators, end-users and other concerned parties.
Aims of standardization
 To achieve maximum overall economy in terms of Cost.

 To ensure maximum convenience in use – simplification,

rationalization, interchangeability of parts, increased
productivity, elimination of unnecessary waste and shortening of
inventories.

 To adopt the best possible solution to recurring problems by use

of scientific knowledge and technological developments .

 Standardization of sampling procedures, test methods, grading

schemes and quality specification.
Types of standards
 Basic standard :- It contains general provisions for one particular field.

 Terminology standard:- It is concerned with terms, definitions,

explanatory notes, illustrations, examples, etc.

 Testing standards:- A standard concerned exclusively with test

methods, supplemented with other provisions related to testing such
as sampling, statistical methods and sequence of testing.

 Product standard:- A standard specifying some or all the requirements

to be met by a product.

 Safety standard:- A standard aimed at the safety of the people and

goods.
NATIONAL ORGANIZATION:-
ASTM (American Society for Testing and Materials)
NSF (National Sanitation Foundation)
NEMA(National electrical Manufacturers Association)
BIS (Bureau of Indian Standards)
BSI (British Standard Institute)
DIN (Detusches Institute for Normung)
FDA (Food & Drug Administration)
ANSI (American National Standard Institution)
INTERNATIONAL ORGANIZATION

ISO (International Standards Organization)

IEC (International Electrochemical Committee)
UL (Underwriters Laboratories)
APLAC ( Asia Pacific Laboratory Accreditation
Certificate)
Benefits of standards
Improved efficiency
Mass production
Superior quality goods through uniformity
Standardization for-
International trade
Technical exchange
Establishment of common markets
SPECIFICATIONS
Specification is the detailed description of
requirement.
for eg: Dimension, Materials etc.
A specification for a plastic material involves
defining particular requirement in terms of density
tensile strength and other related properties.
Purpose(reasons) of Specifications
Help the purchasing department purchase equipment,
materials, and product on an equal basis.

Remove confusion between purchaser and supplier

 ASTM
ASTM International is one of the largest voluntary standards development
organizations in the world-a trusted source for technical standards for materials,
products, systems, and services. Known for their high technical quality and market
relevancy, ASTM International standards have an important role in the information
infrastructure that guides design, manufacturing and trade in the global economy.
ASTM International, originally known as the American Society for Testing and
Materials (ASTM), was formed over a century ago, when a forward-thinking group of
engineers and scientists got together to address frequent rail breaks in the
burgeoning railroad industry. Their work led to standardization on the steel used in
rail construction, ultimately improving railroad safety for the public. As the century
progressed and new industrial, governmental and environmental developments
created new standardization requirements, ASTM answered the call with consensus
standards that have made products and services safer, better and more cost-
effective. The proud tradition and forward vision that started in 1898 is still the
hallmark of ASTM International.
Section 01 - Iron and Steel Products
Section 02 - Nonferrous Metal Products
Section 03 - Metals Test Methods and Analytical
Procedures
Section 04 – Construction
Section 05 - Petroleum Products, Lubricants, and
Fossil Fuels
Section 06 - Paints, Related Coatings, and Aromatics
Section 07 - Textiles
Section 08 – Plastics
Section 09 – Rubber
Section 10 - Electrical Insulation and Electronics
Section 11 - Water and Environmental Technology
Section 12 - Nuclear, Solar, and Geothermal Energy
Section 13 - Medical Devices and Services
Section 14 - General Methods and Instrumentation
Section 15 - General Products, Chemical Specialties,
and End Use Products
Section 08 - Plastics
Volume 08.01, Plastics (I): D 256 - D 3159
D0256-05 Test Methods for Determining the Izod Pendulum Impact
Resistance of Plastics
D0570-98 Test Method for Water Absorption of Plastics
D0638-03 Test Method for Tensile Properties of Plastics
D0695-02A Test Method for Compressive Properties of Rigid
Plastics
D0696-03 Test Method for Coefficient of Linear Thermal Expansion
D0705-99R04 Specification for Urea-Formaldehyde Molding
Compounds
D0732-02 Test Method for Shear Strength of Plastics
D0792-00 Test Methods for Density and Specific Gravity (Relative
Density) of Plastics by Displacement
D0882-02 Test Method for Tensile Properties of Thin Plastic
Sheeting
D0952-02 Test Method for Bond or Cohesive Strength of Sheet
Plastics and Electrical Insulating Materials.
D0955-00 Test Method of Measuring Shrinkage from Mold
Dimensions of Thermoplastics
D1004-03 Test Method for Tear Resistance (Graves Tear) of Plastic
Film and Sheeting
D1045-95R01 Test Methods for Sampling and Testing Plasticizers
Used in Plastics
D1746-03 Test Method for Transparency of Plastic Sheeting
D1921-01 Test Methods for Particle Size (Sieve Analysis) of Plastic
Materials
Volume 08.02, Plastics (II): D 3222 - D 5083
D3291-97R03 Practice for Compatibility of Plasticizers in Poly(Vinyl
Chloride) Plastics Under Compression
D3417 Test Method for Enthalpies of Fusion and Crystallization of
Polymers by Differential Scanning Calorimetry (DSC)
D3418-03 Test Method for Transition Temperatures of Polymers By
Differential Scanning Calorimetry
D3594-93R00 Test Method for Copolymerized Ethyl Acrylate In Ethylene-
Ethyl Acrylate Copolymers
D3916-02 Test Method for Tensile Properties of Pultruded Glass-Fiber-
Reinforced Plastic Rod
D4001-93R99 Test Method for Determination of Weight-Average
Molecular Weight of Polymers By Light Scattering
D4094-00 Test Method for Acid Content of Ethylene-Acrylic Acid
Copolymers
D5033-00 Guide for Development of ASTM Standards Relating to
Recycling and Use of Recycled Plastics
Volume 08.03, Plastics (III): D 5117 - latest
D5138-99A Specification for Liquid Crystal Polymers
D5210-92R00 Test Method for Determining the Anaerobic
Biodegradation of Plastic Materials
D5225-98R03 Test Method for Measuring Solution Viscosity of Polymers
with a Differential Viscometer
D5492-98R03E01 Test Method for Determination of Xylene Soluble in
Propylene Plastics
D5477-02 Practice for Identification of Polymer Layers or Inclusions by
FT-IR
D5593-99E01 Classification for Thermoplastic Elastomers
D5676 Specification for Recycled Polystyrene Molding
D5930-01 Test Method for Thermal Conductivity of Plastics by Means of
a Transient Line-Source Technique
D5946-04 Test Method for Corona-Treated Polymer Films Using Water
Contact Angle Measurements
D5934-02 Test Method for Determination of Modulus of Elasticity
for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of
Loading Using Three-Point Bending
D6110-04E01 Test Method for Determining the Charpy Impact
Resistance
D6290-98E01 Test Method for Color Determination of Plastic
Pellets
D6400-04 Specification for Compostable Plastics
D6435-99 Test Method for Shear Properties of Plastic
D4094-00 Test Method for Acid Content of Ethylene-Acrylic Acid
Copolymers
D5033-00 Guide for Development of ASTM Standards Relating to
Recycling and Use of Recycled Plastics.
E1356-03 Test Method for Assignment of the Glass Transition
Temperatures by Differential Scanning Calorimetry
Section 09 - Rubber
Volume 09.01, Rubber, Natural and Synthetic -- General Test Methods;
Carbon Black-

D0297-93R02E01 Test Methods for Rubber Products\Chemical Analysis

D0395-03 Test Methods for Rubber Property\Compression Set
D0412-98AR02E01 Test Methods for Vulcanized Rubber and Thermoplastic
Elastomers
D0454-04 Test Method for Rubber Deterioration by Heat and Air Pressure
D0624-00E01 Test Method for Tear Strength of Conventional Vulcanized
Rubber and Thermoplastic Elastomers
D0832-92R01E01 Practice for Rubber Conditioning For Low Temperature
Testing
D4295-89R05 Classification for Rubber Compounding Materials\Zinc Oxide
D0926-04 Test Method for Rubber Property\Plasticity and Recovery
(Parallel Plate Method)
D1511-00E02 Test Method for Carbon Black\Pellet Size Distribution
D1519-95R04E01 Test Methods for Rubber Chemicals\Determination of
Melting Range
D1619-03 Test Methods for Carbon Black\Sulfur Content
D1630-94R00 Test Method for Rubber Property\Abrasion Resistance
D1646-04 Test Methods for Rubber\Viscosity, Stress Relaxation, and
Pre-Vulcanization Characteristics
D1992-91R01 Guide for Testing Synthetic Plasticizers Used in Rubber
D3190-00 Test Method for Rubber\Evaluation of Chloroprene Rubber
(CR)
D3677-00R04 Test Methods for Rubber\Identification by Infrared
Spectrophotometry
D4818-89R05 Classification for Rubber Compounding Materials\
Vulcanization Accelerators
 Volume 09.02, Rubber Products,
Industrial -- Specifications and Related Test Methods; Gaskets; Tires
D0380-94R00 Test Methods for Rubber Hose
D1330-04 Specification for Rubber Sheet Gaskets
D3577-01AE02 Specification for Rubber Surgical Gloves
D1047-95R01 Specification for Poly(Vinyl Chloride) Jacket
for Wire and Cable
D2148-02 Test Methods for Bondable Silicone Rubber
Tapes Used for Electrical Insulation
D1764 Specification for Rubber Latex Products for
Automotive Applications
F0037-00 Test Methods for Sealability of Gasket Materials
 ISO
The International Organization for Standardization
ISO is the world's largest developer and publisher of
International Standards.
ISO is a network of the national standards institutes of 157
countries, one member per country, with a Central Secretariat in
Geneva, Switzerland, that coordinates the system
ISO is a non-governmental organization that forms a bridge
between the public and private sectors. On the one hand, many of its
member institutes are part of the governmental structure of their
countries, or are mandated by their government. On the other hand,
other members have their roots uniquely in the private sector,
having been set up by national partnerships of industry associations.
Therefore, ISO enables a consensus to be reached on
solutions that meet both the requirements of business
and the broader needs of society.
Because "International Organization for
Standardization" would have different acronyms in
different languages ("IOS" in English, "OIN" in French for
Organisation internationale de normalisation), its
founders decided to give it also a short, all-purpose
name. They chose "ISO", derived from the Greek isos,
meaning "equal". Whatever the country, whatever the
language, the short form of the organization's name is
always ISO.
Benefits of ISO
make the development, manufacturing and supply of products
and services more efficient, safer and cleaner
facilitate trade between countries and make it fairer
provide governments with a technical base for health, safety
and environmental legislation, and conformity assessment
share technological advances and good management practice
disseminate innovation
safeguard consumers, and users in general, of products and
services
make life simpler by providing solutions to common problems
Popular standard
ISO9000 Quality management
ISO14000 Environment management
ISO3166 Country codes
ISO26000 Social responsibility
ISO 5000 Energy management
ISO31000 Risk management
ISO22000 Food safety management
ISO27001 Information security management
ISO2012 Sustainable events
REACH
REACH is a European union regulation concerning the
registration, Evaluation, Authorization, and restriction
of chemicals.
It came in to force on 1st June 2007 and replaced a
number of European directives and regulations with a
single system .
 REACH is a regulation of the European
union ,adopted to improve the protection of human
health and environment.
Aims of REACH
To provide a high level of protection of human health
and the environment from the use of chemicals.
To make the people who place chemicals on the
market ( manufacturers and importers responsible for
understanding and managing the risk associated with
their use)
To allow the free movement of substances on EU
market .
To enhance innovation in and the competitiveness of
the EU chemicals .
References
HANDBOOK OF PLASTICS TESTING AND
FAILURE ANALYSIS ‘VISHU SHAH’ (THIRD
EDITION).
http://www.polymer-reach.eu/
Thank
you