Scribd
Upload
166 views15 pages

Digital Oscilloscope DS 1102 E Slides ELCELB1

This document provides instructions for using a Rigol DS 1102 E digital oscilloscope. It describes the front panel of the oscilloscope and how to set up the probe correctly. It then explains how to perform basic operations like automatically displaying a signal, measuring the peak-to-peak amplitude and frequency, and storing screen captures on a USB drive. Troubleshooting tips are also provided for unstable signals. Video links with tutorials on using the oscilloscope are listed at the end.

Uploaded by

Vusumuzi mapumulo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
166 views15 pages

Digital Oscilloscope DS 1102 E Slides ELCELB1

This document provides instructions for using a Rigol DS 1102 E digital oscilloscope. It describes the front panel of the oscilloscope and how to set up the probe correctly. It then explains how to perform basic operations like automatically displaying a signal, measuring the peak-to-peak amplitude and frequency, and storing screen captures on a USB drive. Troubleshooting tips are also provided for unstable signals. Video links with tutorials on using the oscilloscope are listed at the end.

Uploaded by

Vusumuzi mapumulo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 15

Digital Oscilloscope

DS 1102 E
A.C
CURRENT
VALUES
Frequency of an AC signal
Rigol DS 1102 E oscilloscope front panel
Rigol DS 1102 E oscilloscope
front panel (cont’d)
Oscilloscope probe

Metallic shield :Prevents external electromagnetic field


from causing interference with the signal.

 Use BNC connectors


Oscilloscope housing

 Set the probe switch to 10X

 Set the probe attenuation in CH 1 menu to


10X to much the switch

 Set the vertical offset back to zero by


pressing the “vertical position” knob

 Turn the level knob and press the trigger


knob to set the trigger back to zero
Oscilloscope housing

Trigger menu

Coupling : DC

Mode : Edge

Mode : Automatic
BASIC OPERATIONS

Displaying a signal automatically

 Connect one of the channels to signal generator

Press “AUTO”: The oscilloscope does the best fit


adjustments and displays the input signal
Measuring Peak to Peak Amplitude

 Connect ch1 of the oscilloscope to the signal

 Press “AUTO”

 Press “MEASURE “button

 Make sure that “SOURCE "is “CH1” on the right side of


the screen

 Press “VOLTAGE "soft button : a sub-menu appears

 Use “MULTI-FUNCTION” knob to select “Vpp” on the


sub-menu
Measuring Frequency
 Connect ch1 of the oscilloscope to the signal

Press “AUTO”

Press “MEASURE “button

Make sure that “SOURCE "is “CH1” on the right side of


the screen

Press “TIME "soft button : a sub-menu appears

Use “MULTI-FUNCTION” knob to select “Freq” on the


sub-menu
Measuring all properties of a signal

 Connect ch1 of the oscilloscope to the signal

 Press “AUTO”

 Press “MEASURE” button

 Make sure that “SOURCE” is “CH1” on the right side of


the screen

 Press “DISPLAY ALL” soft button : a sub-menu appears

 Press “DISPAY ALL” to close the display all feature


Using storage feature

 Connect a USB flash drive

 Press “STORAGE”

 Press the “STORAGE” soft button

 Select “BIT MAP” instead of “WAVEFORM”

 Press “EXTERNAL” soft button and a new menu appears

 Press “NEW FILE” soft button and a new menu appears

 Use Multi-function knob to name the file

 Press “OK” to save the file to the USB flash drive as a bit
map file
Unstable signal

 Adjust trigger level

 Check whether input channel correspond to


the source in the trigger menu

 Press “AUTO”
VIDEO LINKS
httpcoral-i.co.zaopencartindex.phproute=productproduct&product_id=68

Rigol DS1102e Oscilloscope Tutorial 1: Overview, Initial Calibration and Probe Setup
https://www.youtube.com/watch?v=6b0lgN-Rpz0

Rigol DS1102e Oscilloscope Tutorial 2: Vertical and Horizontal Controls


https://www.youtube.com/watch?v=GIFNcqfvSyY

Rigol DS1102e Oscilloscope Tutorial 3: Displaying Measurement Data


https://www.youtube.com/watch?v=TWFq6OCqp7s

How to use an oscilloscope / What is an oscilloscope / Oscilloscope tutorial


https://www.youtube.com/watch?v=CzY2abWCVTY

You might also like