0% found this document useful (0 votes)
23 views

Technical Spec

The document provides specifications for the engines, transmissions, steering and braking systems for 3 vehicle models: 3.8G, 4.6G and 3.0D. The engines are V6 or V8 aluminum block types. Transmissions are electronically controlled 5 or 6 speed automatics with part time 2 speed transfer cases. Steering is power assisted rack and pinion. Brakes are power assisted with ABS.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
23 views

Technical Spec

The document provides specifications for the engines, transmissions, steering and braking systems for 3 vehicle models: 3.8G, 4.6G and 3.0D. The engines are V6 or V8 aluminum block types. Transmissions are electronically controlled 5 or 6 speed automatics with part time 2 speed transfer cases. Steering is power assisted rack and pinion. Brakes are power assisted with ABS.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 3

General

ENGINE Remarks
3.8G 4.6G 3.0D
V-type six-cylinder, aluminum block V-type eight-cylinder, aluminum block V-type six-cylinder, CGI block
Type  
and aluminum head and aluminum head and aluminum head
Displacement (cc/cu. In.) 230.56 cu. in./3778 cc 282.37 cu. in. / 4,627 cc 180.57 cu. in./2959 cc  

Bore x stroke (mm/in.) 3.779 x 3.425 in./96.0 x 87.0 mm 3.622 x 3.425 in. /92.0x87.0 mm 3.307 x 3.504 in./84.0 x 89.0 mm  
Compression ratio
General 10.4:1 10.4:1 17.3:1  
 
Max. power (ps / rpm) 274ps @ 6000 rpm 340ps @6000 rpm 250ps @ 3800 rpm  

Max. torque (kg.m / rpm) 36.9kg.m @ 4400 rpm 44.4kg.m @3500 rpm 55.0kg.m @ 2000 rpm  
Distributorless Type, Distributorless Type, Compression
Injection system  
Controlled by ECU Controlled by ECU Ignition Type
Valve system DOHC 24 Valve DOHC 32 Valves DOHC 24 Valve  
Multi-port Electronic Multi-port Electronic Electronic Common
Fuel system  
Fuel Injection Fuel Injection Rail System
Fuel Pump Electromagnetic  
Regular Unleaded Gasoline Regular Unleaded Gasoline
Fuel Requirement Diesel (equivalent to EN 590)  
(87 octane (RON91) or higher) (87 octane (RON91) or higher)
Fuel tank capacity 82ℓ (21.6 gal)  
 
Ignition Electronic
 
WCC+UCC 3Way Catalyst(Eu3/4) WCC+UCC 3Way Catalyst(Eu3)
Emission control system UCC Oxidation Catalyst(Eu3/4)  
WCC 3Way Catalyst(Eu2) WCC 3Way Catalyst(Eu2)
Battery (AH) 12V, 64AH(5HR), 600A(CCA) 12V, 80AH(5HR), 900A(CCA) 12V, 80AH(5HR), 900A(CCA)  
Electric
Alternator 13.5V, 130A/ 13.5V, 150A 13.5V 180A 12V 150A  
system
Starter 12V, 1.4KW 12V, 1.7KW 12V, 2.2KW  

Lubrication system Feed system by Pump (Duo-IC) Feed system by Pump (Duo-IC) Feed system by Pump (Duo-IC)  

Lubricant oil capacity (liter) 5.8 qts./5.5 liters 6.6 qts. / 6.2 liters 6.8 qts./6.4 liters  
 
Cooling system Pressure Type with Thermostat Forced Circulations by Centrifugal Water Pump (Liquid cooled)
 
chassis part
cooling only
Coolant capacity (liter/quarts) 3.223(l) 4.065(l) 4.4(l)
( engine part
exclusion )
Automatic
Transmission
3.8G 4.6G 3.0D
Drive Type 4WD 4WD 4WD
General Electronically Controlled 5 speed, Overdrive Electronically Controlled 6 speed, Overdrive
1st 3.827:1 4.171:1 4.171:1
2nd 2.368:1 2.340:1 2.340:1
3rd 1.520:1 1.521:1 1.521:1
Gear ratio 4th 1.000:1 1.143:1 1.143:1
5th 0.834:1 0.867:1 0.867:1
6th - 0.691:1 0.691:1
Reverse 2.613:1 3.403:1 3.403:1
Final gear ratio 3.357 3.357 3.357
Part time & Full time two-speed transfer Part time & Full time two-speed transfer Part time & Full time two-speed transfer
Transfer Case / Drive Type
case / Chain case / Chain case / Chain
Transfer Case Ratio ( High / Low ) 1.000 / 2.480 1.000 / 2.480 1.000 / 2.480
Limited-Slip Differential LOCKING DIFFERENTIAL (OPTION)
Clutch Type Hydraulic Torque Converter with Lock Up
Lubricant oil capacity (liter) About 10 About 9.3 About 9.3
STEERING WHEEL
Type Hydraulic Power Assisted, Rack & Pinion, Engine-speed Sensitive
Overall steering gear ratio 17.97
Steering wheel turn (lock to lock) 3.5( Power Assisted )
Turning circle, (curb to curb) 36.48 ft( 11.12m )
BRAKES
General Dual-Diagonal, Split-Circuit, Power-Assist Braking System with EBD
Front & Rear brake type Front : Ventilated Disc Brake / Rear : Solid Disc Brake
without ABS Solid Disc Brake
Rear brake type
with ABS Ventilated Disc Brake
Diameter
9+9 Inch
Vacuum Booster ( ㎜ /Inch)
Booster ratio 9.0 : 1
Type Tandem AS/AS (without ABS), AS/TC(ABS), TC/TC(ESC)
Master cylinder Diameter
Φ26.99
( ㎜ /Inch)
Parking Brake Type Floor Mount Type (Foot Lever Typer)
ABS 4-Wheel Electronic, 4 Sensor, 4 Channel Electronic Brake Distribution, Brake Torque Distribution System (EBD)
Body & Chassis
Layout Front engine, two-wheel or four-wheel drive
Body Type Chassis Frame with 8 Cross Member
Front Double wishbone coil spring with shock absorber, stabilizer bar
Suspension
Rear   Multi-link, coil spring with damper, stabilizer bar
Shock Absorber Gas Type, Twin Tube Shock Absorber
WHEEL & TIRE
Wheel Alloy Wheel 7.5J × 17, Alloy Wheel 7.5J × 18
Tire 245/70R 17, 265/60R18
General
WEIGHT
3.8G 4.6G 3.0D
Curb weight Max. AT 2159 2232 2275
(kg/lbs) Min. AT 2051 2124 2167
Gross weight (kg) (AT) 2720 2800 2800
BOOT CAPACITY (ℓ/cu. ft) SAE
Front Seat   59.15 cu. ft.(1675 liters)
Rear Seat   48.38 cu. ft.(1370 liters)
Interior
3rd Seat   36.90 cu. ft.(1045 liters)
Cargo Area 12.36 cu. ft.(350 liters)

DIMENSIONS( ㎜ /inch)
Overall length   192.1 in (4880 mm)
Overall width   75.4 in (1915 mm)
Overall height   69.5 in(1765 mm) / 71.3 in(1810 mm) - With roof rail
Wheel base   114.0 in(2895 mm)
Exterior
Wheel tread Front 64.2 in(1630 mm)--245Tire, 63.6 in(1615mm)--265Tire
  Rear 64.6 in(1640mm)--245Tire, 64.0 in(1625mm) -265tire
Over hang Front 34.4 in(875mm)
  Rear 43.7 in(1110mm)
Interior Length 104.7in(2660mm)
  Width 62.8in(1595mm)
  Height 47.2in(1200mm)
Leg room Front 41.7 in(1060mm)
  Rear - 1 37.4 in(950mm)
  Rear - 2 32.9 in(835mm)
Head room Front 40.0 in(1015mm) / 38.6 in(980mm) - With sunroof
Interior   Rear - 1 39.0 in(990mm)
  Rear - 2 38.0 in(965mm)
Shoulder room Front 60.2 in(1530mm)
  Rear - 1 59.1 in(1500mm)
  Rear - 2 55.7 in(1415mm)
Hip room Front 57.1 in(1450mm)
  Rear - 1 56.1 in(1425mm)
  Rear - 2 44.9 in(1140mm)
Minimum ground clearance     8.5 in (217 mm) -- TM C/M
Minimum turning circle radius (m)     5.5m

You might also like