Scribd
Upload
38 views

Batch 23 - Cultivation Under Artificial Environment To Increase Productivity and Monitoring Required Parameters

The document summarizes a student project on developing an IoT-based system for cultivation under artificial environments to increase plant productivity and monitor required parameters. The proposed system uses sensors like soil moisture, temperature, humidity and light sensors to detect environmental parameters and actuators like fans, pumps and lights to control the parameters. It aims to create optimal growing conditions for plants regardless of external climate conditions. By monitoring and modifying parameters through a cloud platform, the system is expected to increase yields compared to traditional farming methods.

Uploaded by

Damineni Poojitha
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
38 views

Batch 23 - Cultivation Under Artificial Environment To Increase Productivity and Monitoring Required Parameters

The document summarizes a student project on developing an IoT-based system for cultivation under artificial environments to increase plant productivity and monitor required parameters. The proposed system uses sensors like soil moisture, temperature, humidity and light sensors to detect environmental parameters and actuators like fans, pumps and lights to control the parameters. It aims to create optimal growing conditions for plants regardless of external climate conditions. By monitoring and modifying parameters through a cloud platform, the system is expected to increase yields compared to traditional farming methods.

Uploaded by

Damineni Poojitha
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 13

ANNAMACHARYA INSTITUTE OF TECHNOLOGY & SCIENCES: TIRUPATI

(AUTONOMOUS)

Approved By AICTE , Accredited by NAAC with ‘A’ Grade, Affiliated to JNTUA


DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING

5th International Conference On Emerging Trends in


Engineering & Technology, Science, Management
(ICETSM)

Cultivation Under Artificial Environment To Increase


Productivity And Monitoring Required Parameters

PRESENTED BY Under the Guidance of


D. POOJITHA 19AK1A04B7 Mr. R. NAGARAJU, M. Tech,
M. MAHITHA 19AK1A0481 Assistant Professor,
M. PANDU RANGA 20AK5A0412
Department of ECE.
B. KIRAN KUMAR REDDY 19AK1A0469
ABSTRACT

In recent survey of FAO(Food and Agricultural Organization), the plant


growth rate in India is 1.9% but agricultural productivity is 1%. According to this
survey, upcoming years of 21st century in India the food is inadequate for the
continuous growing population. To overcome this problem, there is a need to keep
track of necessary conditions and parameters, which are required for plant growth
and increases it’s productivity. Hence, we came up with a solution by using sensors
like soil moisture sensor, temperature & humidity sensor and LDR to detect the
current environmental parameters. To meet those required environmental
conditions, actuators like a cooling fan, DC pump and Plant bulbs are used.
Through the cloud platform, continuous monitoring of those parameters, such that,
able to modify them and make sure that increase in productivity by using IoT.

1
INTRODUCTION

▪ The climatic conditions may prevent the growth of certain plants in certain areas
which decreases the yield.
▪ The key aim of this project is to set up the environment by adopting & controlling
the necessary parameters that are required for the plant growth.
▪ Greenhouses contains this system does justice to this by replicating a required
climate.
▪ It maintains the microclimatic parameters in a required ratio as per the
specifications of the plants.
▪ From the implementation of this system, we enhance the growth of the plants for a
maximum yield.

2
EXISTING MODEL

▪ In India, subsistence farming is one of the


most common style of farming.
▪ In subsistence agriculture, farmers and their
families produce crops for themselves or for
Fig 1: Tomato crop damaged due
local markets.
to windstorm
▪ Due to India’s geographical location, certain
parts experience different climates.
▪ Thus, affecting each region’s agricultural
productivity, most of the cases productivity
decreases.
Fig 2:Crop damaged due to
heavy rains

3
PROPOSED MODEL

This system proposes the adoption and control of the soil moisture,
temperature, humidity and light intensity using sensors and actuators. It generates
the required environment and allows the crops to grow anywhere, however the
external climatic parameters be. By implementing our proposed system to a
smaller surface like Greenhouses, the production of vegetables, flowers, herbs,
and small fruits increases compare to the existing farming method.

Fig 3: Cultivation of plant under Fig 4: Monitoring the required


artificial environment using IoT parameters for plant growth.

4
BLOCK DIAGRAM

5
WORKING

High Low
Intensity Intensity Low SOIL
High
LDR MOISTURE

Light OFF Light ON Motor ON Motor OFF

Fig 6: Lighting Fig 7: Moisture

High TEMPER Low Low High


HUMIDITY
ATURE

Heater OFF Heater ON Fan ON Fan OFF

Fig 8: Temperature Fig 9: Humidity


6
RESULTS
Case 1:- DHT11 sensor detects the temperature and humidity values.

Fig 10 : Displays Temperature Fig 12: Displays Temperature Fig 14: Displays Temperature
and Humidity values and Humidity values and Humidity values

Fig 11: Displays as “Normal Fig 13: Displays as” Hot Fig 15:Displays as” Cool
Condition” Condition and Fan is On “. Condition and Heater is On “.

7
Cont….
Case 2: Soil moisture sensor detects the water level in the soil.

Fig 16: Displays as” Soil is Dry Fig 17: Displays as “Soil is Wet
and Motor is On”. and Motor is Off”.

Case 3: LDR sensor detects the presence of light.

Fig 19: Displays as “Sunlight is


Fig 18: Displays as “Sunlight is
absent and A.E bulb is on
present and A.E bulb is off

8
ADVANTAGES & APPLICATIONS

Advantages:-
1. Allowing the crops to grow that are not meant to be cultivated in that area.
2. Easier to monitor and control the growth of crops.
3. Reduced the labor maintenance.
4. Implements with no wastage of resources compare to existing model.

Applications:-
5. Can be used in the degraded lands where less amount of natural resources are
available for cultivation.
6. Used in Floriculture.
7. Used in Greenhouses and certain nurseries where medicinal herbs and plants are
cultivated.
8. Implements in Vertical Farming to increase the productivity.

9
CONCLUSION & FUTURE SCOPE

Conclusion:-
A system that set up the environment by adopting and controlling the necessary
parameters that are required for the specific plant like Light intensity, Soil moisture,
Temperature and Humidity with the help of sensors and actuators by checking the
stability of the factors. By using this system, plant grows in precise manner that
leads to the increases in yield irrespective of the external climatic conditions.

Future scope:-
1. We can able to detect the diseases of the plants automatically while growing with
the extension of this system by adding color sensors.
2. By adding NPK(Nitrogen-Phosphorus-Potassium) sensors, we can measure and
monitor soil nutrient data that can helps us to determine the soil is nutrient
deficient or abundant.

10
REFERENCES

⮚ Sun Rong-Gao and Sun De-Chao, "Greenhouse Temperature and Humidity


Intelligent Control System", Proceeding of 3rd WSEAS international
Conference on Circuits Systems Signal and Telecommunication, 2009.
⮚ K Sumit, K Mohit, K. Aswani and G. Praneet, Monitoring and Control of
Greenhouse Environment, Meerut, India: B. Eng. Project, Department of
Electrical and Electronics Engineering, Bharat Institute of Technology, 2012.
⮚ A Rahali, M Guerbaoui, An Ed- dahhak, Y El Afou, A Tannouche, A. Lachhab,
et al., "Development of Data Acquisition and Greenhouse Control System based
on GSM", International Journal of Engineering Science and Technology, vol. 3,
no. 8, pp. 297-306, 2011.

11
THANK YOU

12

You might also like