ACEE4 BCD To Gray Code Conversion
ACEE4 BCD To Gray Code Conversion
Karnaugh maps, rotary and optical encoders, and error detection all make use of gray codes. Since the hamming distance
between any two neighboring Gray codes, as well as the distance between the first and last Gray codes, is always 1, these
codes are also known as cyclic codes.
The term "binary to gray code converter" refers to the logical circuit that transforms binary code into its equivalent gray code.
By reflecting an n-1 bit code about an axis after 2n-1 rows and placing the MSB (Most Significant Bit) of 0 above the axis and
the MSB of 1 below the axis, an n-bit gray code can be produced.
BCD to Gray Code using XOR Gate
In NI MULTISM Software
INPUT OUTPU
T
A B Y
0 0 0
0 1 1
1 0 1
1 1 0
BCD to Gray Code using XOR Gate
In Actual Board Design
A Gray code converter that transforms binary coded numbers to Gray coded numbers and vice versa was
created and tested. Our target specifications were met
The circuit is relatively portable, small, and has many uses. Most often, it is used in the sphere of
communication.