Scribd
Upload
414 views

Onshape Assignment 11 Wrapping Around A Curved Surface: By: Mr. Gravitt

This document provides instructions for wrapping text or other geometry around a curved surface in OnShape. The steps include: (1) creating a revolved surface from a half circle sketch to form the outer curved surface, (2) hiding the part to sketch an inner half circle, (3) revolving the inner half circle sketch to create a surface inside the outer curved surface. The overall goal is to learn how to cut into and add geometry to a curved surface.

Uploaded by

api-294653971
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
414 views

Onshape Assignment 11 Wrapping Around A Curved Surface: By: Mr. Gravitt

This document provides instructions for wrapping text or other geometry around a curved surface in OnShape. The steps include: (1) creating a revolved surface from a half circle sketch to form the outer curved surface, (2) hiding the part to sketch an inner half circle, (3) revolving the inner half circle sketch to create a surface inside the outer curved surface. The overall goal is to learn how to cut into and add geometry to a curved surface.

Uploaded by

api-294653971
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 25

OnShape

Assignment 11
Wrapping Around
a Curved Surface
By: Mr. Gravitt
You are going to:
You can & many of you have already
figured out on your own how to just
add things by intersecting a curved
surface with a flat part. This time we
are going to learn how to cut &/or add
to a curved surface. We are going to
use Text tool, learn how to center
text, & create a surface (NOT A PART
BUT A SURFACE).
We are going to learn how to WRAP
something around a curved surface…
Step 1 Your Mr Gravitt’s Lessons Folder
you made in lesson 1
Step 2 In Your Mr Gravitt’s Lessons
Folder going to make a new document.
Step 3 Make a New Document
Name this document
Assignment 12 Wrapping
& Click Create
Step 4 – Start a Sketch
• You need to start a new sketch on a
plane.
Step 5 – Name your New Sketch
• You need to name your sketch Outer
Surface Sketch
Step 6 – Draw a Circle
• You need to draw a circle.
• I did 6 inches.
Step 7 – Divide Circle in Half
• You need to draw a line from top of
circle to the bottom. Cut it in half…
Step 8 – Cut Half of Circle Away
• Grab the cut tool.
• Select a click on a half of circle.
Step 9 – Finish this sketch
• Your sketch should look like this.
• Click Finished (Green Checkmark).
Step 10.1 – Revolve It
• Select Revolve, New, & select the
face to be revolved.
Step 10.2 – Revolve Axis
• Select the revolve axis(straight line).
Step 10.3 – Circular Pattern
• Should Revolve & look like this.
• Click Finished (Green Checkmark).
Step 11 – Make Inner Circle Sketch
• On any Plane start a new Sketch
called Inner Surface Sketch.
Step 12.1 – Hide the Part
• We need to “Hide” the part so we can
draw on the inside of it.
Step 12.2 – Hide the Part
• It disappeared!!! It’s OK it’s still
there, we can make it reappear later.
Step 13 – Draw a Circle
• Draw a Circle. I made it 5 inches.
Step 14.1 – Cut the Circle in Half
• Draw a line from top to the bottom of
the circle.
Step 14.2 – Circular Pattern Cutout
• Select Cut & cut away half the circle.
Step 14.3 – Half Circle
• Should look like this when done.
• Click Finished (Green Checkmark).
Step 15.1 – Revolve It as a Surface
• Name it INNER SURFACE REVOLVE.
• Select Surface, Edge to revolve, & Click on the half Circle.
Step 15.2 – Revolve It as a Surface
• Click Revolve Axis & Select the straight
line of the half Circle.
End of the 1 Half
st

Go to 2 Half
nd

You might also like