Scribd
Upload
172 views

Arduino Setup Guide For Otto Robots

This document provides instructions for setting up an Arduino IDE to program an Otto robot. It outlines downloading and installing the Arduino IDE software, selecting the correct board and port settings, downloading Otto libraries, including the libraries in Arduino, and uploading code to the Otto. It also provides an overview of common Otto functions for walking, dancing, singing, gestures and more. Additional steps are included for troubleshooting driver installation on Mac OS systems.

Uploaded by

toptenacademy
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
172 views

Arduino Setup Guide For Otto Robots

This document provides instructions for setting up an Arduino IDE to program an Otto robot. It outlines downloading and installing the Arduino IDE software, selecting the correct board and port settings, downloading Otto libraries, including the libraries in Arduino, and uploading code to the Otto. It also provides an overview of common Otto functions for walking, dancing, singing, gestures and more. Additional steps are included for troubleshooting driver installation on Mac OS systems.

Uploaded by

toptenacademy
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 35

Arduino

setup guide
for Otto
robots
Download & install Arduino IDE
If you have Otto Blockly installed and working on your PC you do not need to install Arduino
because you can open .ino files directly from Blockly
Select the software
You must select the option that correspond to our
operating system.

Not sure the version of your operating system? Check


these links.

Windows and how to install

Linux and how to install

Mac OS and how to install


Download
Otto DIY
Libraries
Link source: https://github.com/OttoDIY/OttoDIYLib/
Install Otto Libraries in Arduino
Open Arduino and select Sketch from the menu bar, then Include Library followed
by selecting Add .ZIP Library.
Include the Libraries
You will be prompted to select the library. Navigate to
the .zip file's location, that you just downloaded and
open as it is.

Navigate under downloads until you see the


OttoDIYLib.zip then select that file.

To check if it was uploaded, select Sketch again >


Include Library > & scrolling down to the bottom you
should see OttoDIY_Lib
Select Board, Processor & Port Settings
1) Select tools from menu bar
2) Board select “Arduino Nano”
3) Processor select “Atmega328P” ( if error select Old bootloader)
4) Port select “COM #” (where your Otto is connected, this can be different in your
computer) if not visible, driver was not installed
File/Examples/OttoDIYLib/Otto_allmoves
Open Codes from examples menu
Upload code to Otto
Lastly select the arrow pointing to the right to upload.

This will automatically check the code and if good it will immediately upload the code to Otto.

If there were no problems, your Otto is now a walking dancing machine! Well only the legs but
that is ok because now we tested that everything is working ;) If not you need to check the
previous steps again.
You are all setup!
Now you can code Otto using Arduino IDE
play with the other examples depending on your
robot kit.
Text based
programming
Text based
Languages that are typed using a keyboard and stored as
a text files.

Typically when people talk about text-based languages


they are referring to programming languages such as
Python, Lua and JavaScript which are ‘real’
programming languages that are used by professional
software developers.

Arduino IDE is based on C++ language


Otto Libraries
Otto.h and Otto.cpp // main functions
Otto_sounds // sound functions
Otto_gestures // gestures functions
Otto_mouths // mouth functions
Otto_matrix // matrix functions

Oscillator is the main algorithm for the servos ¨smooth¨


movement
Wiring shield + nano
This is the electronic diagram of all components you can expand
your robot with our kits, since Otto is now a modular robot, you
can plug or unplug them to have more or components as you
decide and just change the Pins in Otto Blockly.

Components like the 16x8 LED matrix for the eyes can be
interchanged for and OLED display or any other I2C device.

Touch you can swap to any other digital sensor.

Sound you can swap to any other analog sensor.


Otto Functions
This are simple lines of text that send commands, they
are very easy to understand to anyone unfamiliar with
the programming of Otto or even coding itself.

With a simple analysis of the parameters we can get to


understand the commands that we can send to the
robot.

Let's practice with an example, the Otto avoiding


obstacle code on the right.
Otto Functions
From this example, Otto will walk endlessly until
detecting an obstacle.

When this occurs, Otto will sing surprise, then fretful,


followed by a fart sound. Next, it walks back 2 times,
turns right 2 times and if no obstacle, Otto will go back
to walking endlessly.

All those Otto actions are functions! Thanks to the


libraries, this makes our life easier by compressing lots
of complicated code into simple text commands.
Otto Sing
Next if we use the Otto.sing function we can change for
the emitting sounds:

See how simple it is now?

By just changing what is inside the () we can swap the


sounds easily to other 19 different ones.

To make multiple is as simple as copying and pasting in


a new row to make the sounds as many times as you like.
Otto Walk
Let's take a look to a more complex function for Otto to
walk and dance!

These functions have a different structure inside the () as


you can see it is more about parameters and numbers
that we change to alter the speed, direction, and size of
the movements.

#steps are just how many times you want to repeat that
movement without the need of further coding or adding
additional rows. For example, Otto.walk (5,1000,1) is 5
steps.
Otto Walk
Speed it is translated in milliseconds with “T” meaning
“period of time” in the libraries. The higher the
VALUE, the faster the movement.

For example: Slow=2000 Normal=1000 Fast= 500.


Therefore for the function Otto.walk(5,2000,1), 2
seconds for a step of the movement.

The last number is for Direction with

1 for forward/left

-1 for backward/right.
Otto Dances
For moveSize function, this is for additional Otto moves.
It can be Small=5 Medium=15 and Big=30 but feel free
to play with other values and see what happens!

For example, moonwalker you can try between 15 and


40, crusaito 20 to 50, flapping 10 to 30, swing 0 to 50,
up down 0 to 90, tiptoe and swing 0 to 50, up down 0 to
90, jitter 5 to 25 or ascending turn 5 to 15. Thus, you can
have Otto do the moonwalk using this function:
Otto.moonwalk(5,1000.28,25) with Otto doing a medium
swing from the servo for the moonwalk.
Otto Gestures
Finally, our favorite, which is gestures.

This is a combination of the 2 previous functions we


learnt sing + walk

Their goal is to express emotions by combining sounds


with movements at the same time and if you have the
Otto Humanoid expansion using the LED matrix you can
show them in the robot mouth!

As you see it’s very simple, but what it does is quite


advanced.
Learn more
If you want to learn more about how the functions work
behind these simple calls, you can open the source files
of the libraries and you will see all the
“secret” code behind them.

It is recommended for you to understand how the code


works but please note you will need some advanced
knowledge of C coding.

Due to Otto being open-sourced we can see all the


backend of the programming, but is up to you to learn it!
Become a programmer
in our community

join now!
Install Driver on Mac
This slides are if you had problem seeing Otto when
connected to USB
From your desktop click go, and then applications
Click utilities, then terminal

For Mac OSX v10.9+ type in the terminal and hit enter:
cd /Library/Extensions
For Mac OSX v10.8 and below type and hit enter:
Cd /System/Library/Extension
Install CH340 Mac
Next, download & install the CH340 Driver for Mac. You can get it from here.
Once installed you will need to restart the computer and done!
Lets double check
To check to see if the CH340 driver is in the correct path, use the following command
to list the contents of the folder: ls
To look for CH340 driver
files (i.e. usb.kext or
usbserial.kext) in the path,
you could use the following
command:

ls | grep usb
You should see
something similar here
Troubleshooting driver continued
If you have found the file in the path, you will need to run each of the following
commands below in the CLI/Terminal to remove old CH340 drivers. In this case, there
was only the usbserial.kext file but it does not hurt to run both commands. Make sure
to have administrative privileges to ensure that the drivers are removed.

sudo rm -rf /Library/Extensions/usb.kext


sudo rm -rf /Library/Extensions/usbserial.kext
Troubleshooting driver continued
Check if the old drivers were removed in the paths by using the ls command with your
respective OS version. You will notice that the *.kext file is removed from the
respective paths. In this case, the usbserial.kext was removed from Mac OSX High
Sierra.

ls
Troubleshooting driver continued
Next, download and extract the folder here.

Then, open the "*.pkg" file from the unzipped folder and follow the instructions.
You'll need to restart your computer for the changes to take effect.
Troubleshooting driver continued
Heads up! Depending on your settings, you may need to adjust your Security &
Privacy settings to allow the CH340 drivers to function. A window may pop up
indicating that the drivers have been block as shown in the image below
Driver
If you receive a window that indicates that
the system extension is blocked, you'll need
to open a search with Spotlight by pressing
⌘ (Command) + space bar (Space Bar).
Type Security & Privacy and click on the
"Allow" button to enable the CH340 drivers.
Driver Verification
To verify that your driver is working, you should see a difference in the following
pictures after plugging the CH340 to a USB port.
Command Line

Open the Terminal by heading


to Applications > Utilities >
Terminal if the program is
not open yet.
Driver Verification Continued
Next, run the following command:
ls /dev/cu*
A list of devices connected to
your Mac's COM ports will be
displayed as a result.
Assuming that the CH340 is
not connected to your
computer, you should see
something similar to the
image.
Driver Verification Continued
Connect the CH340 to one of your Mac's COM ports. Check for the following changes
(your board may show up under a different device name). The CH340 should show up
as /dev/cu.wchusbserial*****. Depending on your computer, the COM port may
show up as a different number.

You might also like